材料导报 2020, Vol. 34 Issue (Z2): 37-40
无机非金属及其复合材料
|
二氧化钛光催化材料的改性研究进展
巩云1 , 王龙龙1 , 徐亚琪1 , 张传香1,2
1 南京工程学院材料科学与工程学院,南京 211167 2 江苏省先进结构材料与应用技术重点实验室,南京 211167
Research Progress on Photocatalytic Modification of Titanium Dioxide
GONG Yun1 , WANG Longlong1 , XU Yaqi1 , ZHANG Chuanxiang1,2
1 School of Materials Science and Engineering, Nanjing Institute of Technology, Nanjing 211167, China 2 Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology, Nanjing 211167, China
摘要 TiO2 因其优良的催化性能、稳定的化学性能、环保无毒、使用寿命长等优点而在光催化领域得到广泛的研究和应用,但由于其禁带宽度较大(3.0~3.2 eV),需要在紫外光照射下才能发生光催化反应,因此通常对二氧化钛进行改性研究以使其在可见光范围内具有较高的光催化活性。目前对TiO2 的改性已处于深入研究阶段,本文主要综述了单掺(金属、非金属)、共掺(金属与金属、非金属与非金属、金属与非金属)、半导体复合技术对二氧化钛光催化性能的改性研究,提高其对太阳光的利用率。
关键词:
二氧化钛
光催化
改性
掺杂
半导体复合
Abstract: Due to its excellent catalytic properties, stable chemical property, environmental protection, non-toxic, long life and other advantages, TiO2 has extensive research and application in the field of photocatalysis, but its forbidden band width is 3.0—3.2 eV, photocatalytic reaction only occur under ultraviolet (UV) irradiation, therefore, titanium dioxide is usually modified to have higher photocatalytic activity in visible light range. At present, the modification of TiO2 has been in an in-depth research stage. This paper mainly reviews the modification of TiO2 photocatalytic properties by single doping(metal doping, non-metal doping), co-doping(metal and metal, non-metal and non-metal, metal and non-metal) and semiconductor composite technologies, so as to improve the utilization rate of TiO2 to sunlight.
Key words:
titanium dioxide
photocatalytic
modification
doping
semiconductor composite
出版日期: 2020-11-25
发布日期: 2021-01-08
基金资助: 大学生科技创新基金项目(TB201902020;TB201902025);江苏省先进结构材料与应用技术重点实验室开放基金(ASMA201911)
通讯作者:
zhangcxnuaa@ njit.edu.cn
作者简介: 巩云,本科生,就读于南京工程学院。多次获得奖学金、校三好学生、校优秀学生干部等荣誉,获得“全国大学生英语竞赛”三等奖,参与“互联网+”项目和大学生科技创新项目,在张传香副教授的指导下研究二氧化钛的光催化性能。张传香,博士,南京工程学院副教授。2012年博士毕业于日本高知大学,同年参加工作至今。负责完成国家级、省部级、校级科研项目各一项,在国内外学术期刊上发表论文40余篇,申请国家发明专利6项,其中授权2项。已培养博士研究生2名、硕士研究生6名,本科生百余名。
引用本文:
巩云, 王龙龙, 徐亚琪, 张传香. 二氧化钛光催化材料的改性研究进展[J]. 材料导报, 2020, 34(Z2): 37-40.
GONG Yun, WANG Longlong, XU Yaqi, ZHANG Chuanxiang. Research Progress on Photocatalytic Modification of Titanium Dioxide. Materials Reports, 2020, 34(Z2): 37-40.
链接本文:
http://www.mater-rep.com/CN/
或
http://www.mater-rep.com/CN/Y2020/V34/IZ2/37
1 王丽, 陈永, 赵辉, 等.材料导报:综述篇, 2015, 29(1),147. 2 Fernando L, Adam J. R, Rochelle D, et al.Materials Science & Enginee-ring C , 2018, 93, 931. 3 张文韬, 殷彤蛟, 田鹏.山东化工, 2017, 46(5), 34. 4 王丽丽, 曹丰.材料科学与工程学报, 2017, 35(5),855. 5 弓莹, 刘慧瑾, 高雯雯, 等.广东化工, 2016, 43(14),307. 6 余威威, 张青红, 石国英, 等.无机材料学报, 2011, 26(7), 747. 7 李海龙, 罗武林, 田文宇, 等.光谱学与光谱分析, 2009, 29(6),1623. 8 朱荣淑, 喻灵敏, 董文艺.哈尔滨工业大学学报, 2013, 45(8), 56. 9 周雪锋, 李伟, 郑仲, 等.催化学报, 2007(4),327. 10 张绍岩, 次立杰, 丁士文, 等.人工晶体学报, 2010, 39(3), 761. 11 李海龙, 罗武林, 陈涛, 等.物理化学学报, 2008(8),1383. 12 张清林, 王福祥, 夏明霞, 等.材料导报:研究篇, 2012, 26(8), 22. 13 廖斌, 梁宏, 张旭, 等.北京师范大学学报(自然科学版), 2011, 47(2),154. 14 林松竹, 王守航.东北电力大学学报, 2016, 36(3), 69. 15 宋明光, 王筠松, 郭耘, 等.催化学报, 2017, 38(7), 1155. 16 余立志, 李京伟, 林银河.能源化工, 2019, 40(2),11. 17 昂源, 贺奎, 董全霄, 等.稀有金属材料与工程, 2016, 45(S1), 360. 18 Crisan M, Mardare D, Ianculescu A, et al.Applied Surface Science , 2018, 455,201. 19 谈敏. 铁掺杂TiO2 光催化剂的制备,表征及光催化固氮性能研究. 硕士学位论文, 浙江大学, 2011. 20 林雪, 李贵安, 牛文成, 等.陕西师范大学学报(自然科学版), 2013, 41(1), 36. 21 刘祥志, 徐明霞, 李顺, 等.武汉理工大学学报, 2007(10),173. 22 黄金占, 郑爱华, 陈祖国.浙江化工, 2018, 49(12), 13. 23 Li Y D, Wang X, Yi J X, et al.Chemistry: A European Journal , 2006, 12(8), 2383. 24 Khairy M, Zakaria W.Egyptian Journal of Petroleum , 2014, 23(4), 419. 25 刘勇.青岛科技大学学报(自然科学版), 2017, 38(S1),21. 26 Jun J, Jin C, Kim H, et al.Applied Surface Science , 2009, 255(20), 8648. 27 刘步明, 闫龙, 杨宏伟.硅酸盐通报, 2008(5),933. 28 朱琳, 张福胜, 曾晓丹.广州化工, 2018, 46(1), 75. 29 郑健, 田颖, 程国伟.大连交通大学学报, 2016, 37(4), 105. 30 尹冬菊, 施冬健, 朱文倩, 等.应用化工, 2018, 47(11), 2322. 31 相杉杉, 徐晨, 徐国跃, 等.兵器材料科学与工程, 2019, 42(1), 36. 32 王安琪, 陈淑芬.当代化工研究, 2016(8), 58. 33 Lombardi J R, Zhao B, Li Z, et al.Spectrochimica Acta Part A , 2012, 95, 213. 34 张霞, 胡芸, 龚倩, 等.化工进展, 2010, 29(6), 1071. 35 Yu J X, Liu S W, Xiu Z L, et al. Journal of Alloys and Compounds , 2008, 461,17. 36 Xu A W, Liu H Q, Gao Y. Journal of Catalysis , 2002, 207, 151. 37 Xie Y B, Yuan C W.Applied Surface Science , 2004, 221,17. 38 敖特根, 侯清玉, 迎春.钛工业进展, 2012, 29(1), 13. 39 宋明冬. 铈掺杂二氧化钛纳米管的制备及光催化性能研究.硕士学位论文, 吉林大学, 2014. 40 尼亚琼, 康华, 李桂春.中国非金属矿工业导刊, 2015(2), 9. 41 段秋宴, 傅敏, 蕫帆, 等. 人工晶体学报, 2013, 42(4), 677. 42 张春磊, 黄丹娅, 孙明慧, 等.高等学校化学学报, 2017, 38(3), 471. 43 鲍闻渊, 李利军, 冯军, 等.光散射学报, 2017, 29(3),210. 44 Ze W, Zhiqiang Z, Xianyou Z.Chinese Science Bulletin , 2005, 50(23),2691. 45 于爱敏, 武光军, 严晶晶, 等.催化学报, 2009, 30(2),137. 46 张理元, 涂秋梅, 由耀辉, 等.人工晶体学报, 2018, 47(11), 2408. 47 Nitin K L, Shunichi H, Hajime H, et al. Journal of Fluorine Chemistry , 2005, 126(1), 69. 48 蒋悦, 贾漫珂, 邹彩琼, 等.环境工程学报, 2013, 7(3),975. 49 何奕明, 王剑斌, 陈洲洋, 等.环境科学学报, 2016, 36(9),3409. 50 王丽丽, 曹丰.材料科学与工程学报, 2017, 35(5), 855. 51 杨志怀, 张云鹏, 康翠萍, 等.光子学报, 2014, 43(8), 150. 52 唐泽华, 胡兰青.硅酸盐通报, 2015, 34(4),1089. 53 支晨琛, 张秀芝, 宫长伟.材料科学与工程学报, 2016, 34(1), 131. 54 邱凯, 张兰春, 何淑仁, 等.合成化学, 2015, 23(4), 293. 55 徐松梅, 高朋召, 石宗利.硅酸盐通报, 2008(4), 777. 56 陈寒玉.应用化工, 2015, 44(1), 37. 57 陈汉林, 敖日其冷, 陈梓烽, 等.环境科学学报, 2015, 35(9), 2790. 58 王东升, 廖运文, 何平, 等.西华师范大学学报(自然科学版), 2011, 32(2), 180. 59 刘丽丽, 陈守刚, 孙伟伟, 等.现代化工, 2011, 31(S1), 137. 60 赵鑫, 翟永佳, 林朝阳, 等.安全与环境学报, 2015, 15(4), 268. 61 张玉玉, 刘延滨, 商希礼.山东化工, 2015, 44(15),35. 62 康华.工业催化, 2011, 9(8), 32. 63 何东林, 黄洪, 钟理.化工进展, 2015, 34(S1), 104. 64 田宝柱, 童天中, 陈锋, 等.感光科学与光化学, 2006, 2(24), 93. 65 丁永萍, 谷中明, 刘文芳, 等.四川大学学报(自然科学版), 2015, 52(6),1331. 66 李跃军, 曹铁平, 王长华, 等.高等学校化学学报, 2011, 32(11),2490. 67 宁伟伟. 二氧化钛纳米纤维材料的制备及其对甲醛的光催化降解性能.硕士学位论文, 东华大学, 2017. 68 张宏忠, 秦小青, 王明花.环境工程学报, 2016, 10(1), 169.
[1]
Ninghui LIANG,Peng YANG,Xinrong LIU,Yang ZHONG,Zheqi GUO. A Study on Dynamic Compressive Mechanical Properties of Multi-size Polypropylene Fiber Concrete Under High Strain Rate [J]. Materials Reports, 2018, 32(2): 288
-294
.
[2]
WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing [J]. Materials Reports, 2017, 31(1): 64
-71
.
[3]
GUO Hongjian, JIA Junhong, ZHANG Zhenyu, LIANG Bunu, CHEN Wenyuan, LI Bo, WANG Jianyi. Microstructure and Tribological Properties of VN/Ag Films Fabricated by Pulsed Laser Deposition Technique [J]. Materials Reports, 2017, 31(2): 55
-59
.
[4]
WANG Wenjin, WANG Keqiang, YE Shenjie, MIAO Weijun, CHEN Zhongren. Effect of Asymmetric Block Copolymer of PI-b-PB on Phase Morphology and Properties of IR/BR Blends [J]. Materials Reports, 2017, 31(2): 96
-100
.
[5]
HUANG Dajian, MA Zonghong, MA Chenyang, WANG Xinwei. Preparation and Properties of Gelatin/Chitosan Composite Films Enhanced by Chitin Nanofiber [J]. Materials Reports, 2017, 31(8): 21
-24
.
[6]
YUAN Xinjian, LI Ci, WANG Haodong, LIANG Xuebo, ZENG Dingding, XIE Chaojie. Effects of Micro-alloying of Chromium and Vanadium on Microstructure and Mechanical Properties of High Carbon Steel [J]. Materials Reports, 2017, 31(8): 76
-81
.
[7]
ZHANG Le, ZHOU Tianyuan, CHEN Hao, YANG Hao, ZHANG Qitu, SONG Bo, WONG Chingping. Advances in Transparent Nd∶YAG Laser Ceramics [J]. Materials Reports, 2017, 31(13): 41
-50
.
[8]
YAN Zhilong, LI Yongsheng, HU Kai, ZHOU Xiaorong. Progress of Study on Phase Decomposition of Duplex Stainless Steel [J]. Materials Reports, 2017, 31(15): 75
-80
.
[9]
SHI Yu, ZHOU Xianglong, ZHU Ming, GU Yufen, FAN Ding. Effect of Filler Wires on Brazing Interface Microstructure and Mechanical Properties of Al/Cu Dissimilar Metals Welding-Brazing Joint [J]. Materials Reports, 2017, 31(10): 61
.
[10]
DONG Fei,YI Youping,HUANG Shiquan,ZHANG Yuxun,. TTT Curves and Quench Sensitivity of 2A14 Aluminum Alloy [J]. Materials Reports, 2017, 31(10): 77
-81
.
Viewed
Full text
Abstract
Cited
Shared
Discussed