Please wait a minute...
材料导报  2020, Vol. 34 Issue (Z2): 132-137    
  无机非金属及其复合材料 |
镀铜空心玻璃微珠的光催化降解性能
赵可一1, 曾和平2
1 珠海市西部生态环境监测中心,珠海 519040
2 华南理工大学化学与化工学院,广州 510640
Photocatalytic Degradation Performance of Copper-plated Hollow Glass Microspheres
ZHAO Keyi1, ZENG Heping2
1 Zhuhai West Ecological Environment Monitoring Center, Zhuhai 519040,China
2 School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510640,China
下载:  全 文 ( PDF ) ( 7741KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 本实验采用化学镀法在空心玻璃微珠表面镀覆纳米铜,以甲基橙模拟有机染料,研究镀铜空心玻璃微珠光催化降解甲基橙的性能。通过多组实验来选择合适的光催化降解体系,包括最佳甲基橙初始浓度、最佳含铜量等,最后提出镀铜空心玻璃微珠光催化降解甲基橙的机理。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
赵可一
曾和平
关键词:  光催化降解  空心玻璃微珠  化学镀铜    
Abstract: In this paper, the surface of hollow glass microspheres (HGMs) was plated with nano-copper by electroless plating. The performance of photocatalytic degradation of copper-plated HGMs was studied by simulating organic dyes by methyl orange (MO). We made a successful effort to select the appropriate photocatalytic degradation system though multiple sets of experiments, including the optimal initial concentration of methyl orange and the best copper content. Finally, a mechanism for the degradation of methyl orange by copper-plated HGMs was proposed.
Key words:  photocatalytic degradation    hollow glass microspheres    electroless copper plating
               出版日期:  2020-11-25      发布日期:  2021-01-08
ZTFLH:  X703  
  O643  
通讯作者:  985467415@qq.com   
作者简介:  赵可一,2016年毕业于华南理工大学有机化学专业,获得理学硕士学位。在校期间主要从事光催化材料的研究。目前在珠海市西部生态环境监测中心从事环境监测工作。
引用本文:    
赵可一, 曾和平. 镀铜空心玻璃微珠的光催化降解性能[J]. 材料导报, 2020, 34(Z2): 132-137.
ZHAO Keyi, ZENG Heping. Photocatalytic Degradation Performance of Copper-plated Hollow Glass Microspheres. Materials Reports, 2020, 34(Z2): 132-137.
链接本文:  
http://www.mater-rep.com/CN/  或          http://www.mater-rep.com/CN/Y2020/V34/IZ2/132
1 郭娜. 二氧化钛复合光催化剂的制备及对有机染料光降解性能研究.硕士学位论文,吉林大学, 2015.
2 Carey J H, Lawrence J, Tosine H M. Bulletin of Environmental Contamination and Toxicology, 1976, 16(6),697.
3 李大玉, 张文韬, 张超. 材料导报:综述篇, 2019, 33(12), 3900.
4 潘家豪, 吴礼光, 王挺, 等.环境科学学报, 2018, 38(12), 4670.
5 Dong F, Xiong T, Sun Y, et al. Chemical Communications, 2014, 50(72), 10386.
6 Chan G H, Zhao J, Hicks E M, et al.Nano Letters,2007, 7(7), 1947.
7 张永锋,马玲俊,郭为民,等.材料开发与应用, 2000, 15(2), 30.
8 秦铁男,马立群,刘敏基,等.中国表面工程, 2010, 23(1), 69.
9 王爱荣. 表面技术, 2001, 30(5), 11.
10 菅泽. 材料导报:研究篇, 2011, 25(9),27.
11 Becquerel A. Comptes Rendus, 1839, 9(567), 1839.
12 方世杰, 徐明霞, 黄卫友,等. 硅酸盐学报, 2001(5), 439.
13 刘丹. 纳米铜对甲基橙降解性能的研究.硕士学位论文, 吉林大学, 2016.
14 王俊鹏. 半导体材料的能带调控及其光催化性能的研究. 硕士学位论文, 山东大学, 2013.
15 Liu H, Wang T T, Zeng H P. Particle & Particle Systems Characterization, 2015, 32(9), 869.
[1] 卢建红, 邓小梅, 阎建辉, 涂继国, 王明涌, 焦树强. 2,2′-联吡啶对化学铜二元络合剂体系沉积过程的影响[J]. 材料导报, 2020, 34(Z2): 539-542.
[2] 祝一锋, 黄小钢, 朱文仙, 张攀攀, 唐华东. 原位光催化聚合制备聚(N-乙烯基咔唑)/TiO2纳米复合材料及其光催化性能[J]. 材料导报, 2020, 34(2): 2147-2152.
[3] 余为, 张雄博. 考虑界面的空心玻璃微珠/环氧树脂复合泡沫材料的力学性能仿真分析[J]. 材料导报, 2020, 34(16): 16161-16166.
[4] 周娩红,陈石林,杨建校,郭建光. 镀铜CF/ABS树脂复合材料的导电性能[J]. 《材料导报》期刊社, 2018, 32(10): 1592-1596.
[1] Ninghui LIANG,Peng YANG,Xinrong LIU,Yang ZHONG,Zheqi GUO. A Study on Dynamic Compressive Mechanical Properties of Multi-size Polypropylene Fiber Concrete Under High Strain Rate[J]. Materials Reports, 2018, 32(2): 288 -294 .
[2] WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing[J]. Materials Reports, 2017, 31(1): 64 -71 .
[3] GUO Hongjian, JIA Junhong, ZHANG Zhenyu, LIANG Bunu, CHEN Wenyuan, LI Bo, WANG Jianyi. Microstructure and Tribological Properties of VN/Ag Films Fabricated by Pulsed Laser Deposition Technique[J]. Materials Reports, 2017, 31(2): 55 -59 .
[4] WANG Wenjin, WANG Keqiang, YE Shenjie, MIAO Weijun, CHEN Zhongren. Effect of Asymmetric Block Copolymer of PI-b-PB on Phase Morphology and Properties of IR/BR Blends[J]. Materials Reports, 2017, 31(2): 96 -100 .
[5] HUANG Dajian, MA Zonghong, MA Chenyang, WANG Xinwei. Preparation and Properties of Gelatin/Chitosan Composite Films Enhanced by Chitin Nanofiber[J]. Materials Reports, 2017, 31(8): 21 -24 .
[6] YUAN Xinjian, LI Ci, WANG Haodong, LIANG Xuebo, ZENG Dingding, XIE Chaojie. Effects of Micro-alloying of Chromium and Vanadium on Microstructure and Mechanical Properties of High Carbon Steel[J]. Materials Reports, 2017, 31(8): 76 -81 .
[7] ZHANG Le, ZHOU Tianyuan, CHEN Hao, YANG Hao, ZHANG Qitu, SONG Bo, WONG Chingping. Advances in Transparent Nd∶YAG Laser Ceramics[J]. Materials Reports, 2017, 31(13): 41 -50 .
[8] YAN Zhilong, LI Yongsheng, HU Kai, ZHOU Xiaorong. Progress of Study on Phase Decomposition of Duplex Stainless Steel[J]. Materials Reports, 2017, 31(15): 75 -80 .
[9] SHI Yu, ZHOU Xianglong, ZHU Ming, GU Yufen, FAN Ding. Effect of Filler Wires on Brazing Interface Microstructure and Mechanical Properties of Al/Cu Dissimilar Metals Welding-Brazing Joint[J]. Materials Reports, 2017, 31(10): 61 .
[10] DONG Fei,YI Youping,HUANG Shiquan,ZHANG Yuxun,. TTT Curves and Quench Sensitivity of 2A14 Aluminum Alloy[J]. Materials Reports, 2017, 31(10): 77 -81 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed