Please wait a minute...
《材料导报》期刊社  2018, Vol. 32 Issue (3): 418-426    https://doi.org/10.11896/j.issn.1005-023X.2018.03.012
     材料综述 ｜ |
铁碳合金表面激光熔覆的研究进展
赵聪硕1,2,邢志国2,王海斗2,3,李国禄1,刘喆2,3
1 河北工业大学材料科学与工程学院,天津 300130
2 装甲兵工程学院装备再制造技术国防科技重点实验室,北京 100072
3 哈尔滨工程大学材料科学与化学工程学院,哈尔滨 150001
Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix
Congshuo ZHAO1,2,Zhiguo XING2,Haidou WANG2,3,Guolu LI1,Zhe LIU2,3
1 School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130
2 National Key Lab for Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072
3 School of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001
下载:  全 文 ( PDF ) ( 2207KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 

激光熔覆技术具有加热速度快、熔覆过程中产生的热影响区小、基体表面温度低等优点,因此能够较好地保证零部件的尺寸精度,近年来发展成广泛应用的表面改性技术。激光熔覆技术对涂层粉末以及基材选择要求不高,因此广泛应用于不同种类基体材料的再制造修复。从铁碳合金材料出发,分别对激光熔覆技术在改善铸铁、碳钢及合金钢材料的力学性能、耐磨性、耐蚀性、抗热疲劳性等方面的应用进展和存在的问题及对策进行了分析,阐明了工艺参数、材料成分以及工件的预热或后处理对制备高质量大熔覆层组织和性能的影响规律,最后指出了激光熔覆技术在目前研究中存在的问题并对其未来发展方向进行了展望。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
赵聪硕
邢志国
王海斗
李国禄
刘喆
关键词:  激光熔覆  铁碳合金  熔覆材料  熔覆层工艺  熔覆层性能    
Abstract: 

Laser cladding technology (LCT) has the advantages of fast heating speed, small heat affected zone, and low surface temperature of the substrate, thus it can better ensure the dimensional accuracy of parts. In recent years, it has become a widely used technique for surface modification. Laser cladding technology has no requirements for coating powder and matrix material, therefore, it is extensively applied to remanufacture and repair different kinds of components. In this paper, the research status of laser cladding are summarized from the point of iron carbon alloy materials, including cast iron, carbon steel and alloy steel parts. The applications of laser cladding in improving the mechanical properties, wear resistance, corrosion resistance and fatigue resistance of materials are also reviewed. Besides, the problems existing in this technology are proposed and the countermeasures are pointed out. And the conditions for preparing high quality cladding layer are given from aspects of strictly control of process parameters, optimization of material composition and preheat of work-piece or post-processing etc. Finally, the existing problems of current research about laser cladding are pointed out and the future development is also proposed.
Key words:  laser cladding    iron carbon alloy    laser cladding materials    laser cladding technology    laser cladding coating pro-perties
               出版日期:  2018-02-10      发布日期:  2018-02-10
ZTFLH:  TG174.44  
基金资助: 国家自然科学基金重点项目(51535011);国防973计划(61328304);国家自然科学基金面上项目(51675158)
作者简介:  赵聪硕:女,1991年生,硕士研究生,主要从事表面工程研究 E-mail: 18811026281@163.com|王海斗:通信作者,男,1969年生,博士,教授,博士生导师,从事表面工程、摩擦学方面的研究 E-mail: wanghaidou@aliyun.com
引用本文:    
赵聪硕,邢志国,王海斗,李国禄,刘喆. 铁碳合金表面激光熔覆的研究进展[J]. 《材料导报》期刊社, 2018, 32(3): 418-426.
Congshuo ZHAO,Zhiguo XING,Haidou WANG,Guolu LI,Zhe LIU. Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix. Materials Reports, 2018, 32(3): 418-426.
链接本文:  
http://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2018.03.012  或          http://www.mater-rep.com/CN/Y2018/V32/I3/418
  
  
  
  
  
  
1 Zhang C X, Wang H F, Zhang S R , et al. Strategic study on green development of Chinese steel instrustry[J]. Iron and Steel, 2015,50(10):2(in Chinese).
1 张春霞, 王海风, 张寿荣 , 等. 中国钢铁工业绿色发展工程科技战略及对策[J]. 钢铁, 2015,50(10):2.
2 Tian G, Chu J, Hu H , et al. Technology innovation system and its integrated structure for automotive components remanufacturing industry development in China[J]. Journal of Cleaner Production, 2014,85:419.
3 Zhang W, Ji X C, Wei M , et al. System of dometic and foreign remanufacturing technology and competitiveness analysis[J]. China Surface Engineering, 2014,27(3):1(in Chinese).
3 张伟, 吉小超, 魏敏 , 等. 国内外再制造技术体系及竞争力分析[J]. 中国表面工程, 2014,27(3):1.
4 Fu F, Zhang Y, Chang G , et al. Analysis on the physical mechanism of laser cladding crack and its influence factors[J]. Optik-International Journal for Light and Electron Optics, 2016,127(1):200.
5 Khanna A S, Kumari S, Kanungo S , et al. Hard coatings based on thermal spray and laser cladding[J]. International Journal of Refractory Metals & Hard Materials, 2009,27(2):485.
6 Xu G, Kutsuna M, Liu Z , et al. Characteristics of Ni-based coating layer formed by laser and plasma cladding processes[J]. Materials Science & Engineering A, 2006,417(1-2):63.
7 Huang J, Li Z, Cui H , et al. Laser welding and laser cladding of high performance materials[J]. Physics Procedia, 2010,5(Part B):1.
8 Przestacki D, Majchrowski R, Marciniak-Podsadna L . Experimental research of surface roughness and surface texture after laser cladding[J]. Applied Surface Science, 2016,388(A):420.
9 Liu X P, Zhang P L, Liu Y L , et al. Research progress on strengthening phase in laser clad silicide coating[J]. Materials Review A:Review Papers, 2015,29(1):72(in Chinese).
9 刘晓鹏, 张培磊, 卢云龙 , 等. 激光熔覆硅化物涂层强化相的研究进展[J]. 材料导报:综述篇, 2015,29(1):72.
10 Liu B, Dong S . Stress evaluation of laser cladding coating with critically refracted longitudinal wave based on cross correlation function[J]. Applied Acoustics, 2016,101:98.
11 Rottwinkel B, N?lke C, Kaierle S , et al. Crack repair of single crystal turbine blades using laser cladding technology[J]. Procedia Cirp, 2014,22(1):263.
12 Lewis S R, Lewis R , Fletcher D I. Assessment of laser cladding as an option for repairing/enhancing rails[J].Wear, 2015, 330- 331:581.
13 Qian Z . High wear-resistant particulate reinforced composite coa-tings for corrugated rollers by laser cladding[J]. Chinese Journal of Lasers, 2008,35(8):1271.
14 Weng F, Chen C, Yu H . Research status of laser cladding on titanium and its alloys: A review[J]. Materials & Design, 2014,58(6):412.
15 Huo W Y, Shi H F, Zhang J Y . Progress in high-entropy alloy clad coatings[J]. Materials Review A:Review Papers, 2014,28(11):76(in Chinese).
15 霍文燚, 时海芳, 张竞元 . 高熵合金熔覆涂层的研究进展[J]. 材料导报:综述篇, 2014,28(11):76.
16 Lejeail Y, Kasahara N . Thermal fatigue evaluation of cylinders and plates subjected to fluid temperature fluctuations[J]. International Journal of Fatigue, 2005,27(7):768.
17 Tong X, Li F H, Liu M , et al. Thermal fatigue resistance of non-smooth cast iron treated by laser cladding with different self-fluxing alloys[J]. Optics & Laser Technology, 2010,42(7):1154.
18 Ren Z A, Zhou Z F, Sun D Q . Advance of researches on the cold cracking of the gray cast iron cold-welding with homogenous welding consumables[J]. Transactions of the China Welding Institution, 2001,22(1):91(in Chinese).
18 任振安, 周振丰, 孙大谦 . 灰铸铁同质焊缝电弧冷焊接头冷裂纹研究进展[J]. 焊接学报, 2001,22(1):91.
19 Yan S X, Dong S Y, Xu B S , et al. Carbon diffusions in the NiCuFeBSi alloy laser treated by laser cladding on gray cast iron[J]. Rare Metal Materials and Engineering, 2014,43(9):2182(in Chinese).
19 闫世兴, 董世运, 徐滨士 , 等. 灰铸铁表面激光熔覆NiCuFeBSi合金层中碳扩散形式研究[J]. 稀有金属材料与工程, 2014,43(9):2182.
20 Liu H, Yu G, He X L , et al. Microstructure and mechanical properties of NiCoCrAlY coating on compacted graphite iron by laser cladding[J]. Transaction of Materials and Heat Treatment, 2015,36(3):171(in Chinese).
20 刘昊, 虞钢, 何秀丽 , 等. 蠕墨铸铁激光合金化熔覆的界面组织及性能[J]. 材料热处理学报, 2015,36(3):171.
21 Sun N, Zhou H, Shan H Y , et al. Wear resistance of compact graphite cast iron with bio-mimetic non-smooth surface processed by laser[J]. Journal of Jilin University(Engineering and Technology Edition), 2009,39(5):1157(in Chinese).
21 孙娜, 周宏, 单宏宇 , 等. 激光制备仿生非光滑表面蠕墨铸铁的耐磨性[J]. 吉林大学学报(工学报), 2009,39(5):1157.
22 Liu H, Hao J, Han Z , et al. Microstructural evolution and bonding characteristic in multi-layer laser cladding of NiCoCr alloy on compacted graphite cast iron[J]. Journal of Materials Processing Technology, 2016,232:153.
23 Huang Y, Zeng X, Hu Q , et al. Microstructure and interface inte-raction in laser induction hybrid cladding of Ni-based coating[J]. Applied Surface Science, 2009,255(7):3940.
24 Ocelík V, Oliveira U D, Boer M D , et al. Thick Co-based coating on cast iron by side laser cladding: Analysis of processing conditions and coating properties[J]. Surface & Coatings Technology, 2007,201(12):5875.
25 Li Y L, Pan D, Gan C F , et al. Microstructure and properties of surface laser clad Ni-base alloy layer on QT-500 ductile cast iron[J]. Heat Treatment of Metals, 2012,37(2):106(in Chinese).
25 李养良, 潘东, 甘春飞 , 等. QT-500球墨铸铁表面激光熔覆镍基合金的组织与性能[J]. 金属热处理, 2012,37(2):106.
26 Li B L, Wen Z Y, Feng S Q , et al. Research and application of laser cladding Ni-based alloy on ductile cast iron[J]. Laser Journal, 2012,33(3):35(in Chinese).
26 李宝灵, 温宗胤, 冯树强 , 等. 球墨铸铁激光熔覆镍基合金的研究与应用[J]. 激光杂志, 2012,33(3):35.
27 Weng Z, Wang A, Wang Y , et al. Diode laser cladding of Fe-based alloy on ductile cast iron and related interfacial behavior[J]. Surface & Coatings Technology, 2015,286(4):341.
28 Arias-González F, Val J D, Comesa?a R , et al. Fiber laser cladding of nickel-based alloy on castiron[J]. Applied Surface Science, 2016,374:197.
29 Lin C M, Chandra A S, Moralesrivas L , et al. Repair welding of ductile cast iron by laser cladding process: Microstructure and mechanical properties[J]. International Journal of Cast Metals Research, 2014,27(6):378.
30 Niu X L, Zhang D Q, Li J H , et al. Study of laser cladding Fe-based powder on 45 steel surface[J].Machinery Design & Manufacture, 2014(12):148(in Chinese).
30 牛兴林, 张德强, 李金华 , 等. 45钢表面激光熔覆Fe基粉末实验研究[J].机械设计与制造, 2014(12):148.
31 Feng H, Li J F, Sun J . Study on remanufacturing repair of damaged crank shaft journal surface by laser cladding[J]. Chinese Journal of Lasers, 2014,41(8):80(in Chinese).
31 封慧, 李剑峰, 孙杰 . 曲轴轴颈损伤表面的激光熔覆再制造修复[J]. 中国激光, 2014,41(8):80.
32 Wu S, Peng R S . Study of microstructure and properties of laser cladding coating of WC-12Co metal cermet on surface of 45 steel[J]. Casting Forging Welding, 2008,37(7):74(in Chinese).
32 吴思, 彭如恕 . 45钢表面WC-12Co金属陶瓷激光熔覆层的组织与性能研究[J]. 热加工工艺, 2008,37(7):74.
33 Chen X, Li G C, Wang H T , et al. Microstructure and properties of MoB/CoCr cermet coating on 45 steel prepared by laser cladding[J]. Transactions of Materials and Heat Treatment, 2012,33(10):111(in Chinese).
33 陈枭, 纪岗昌, 王洪涛 , 等. 45钢表面激光熔覆MoB/CoCr金属陶瓷覆层的组织与性能[J]. 材料热处理学报, 2012,33(10):111.
34 Xue M P, Han B, Wang Y , et al. Microstructures and corrosion resistance properties of Ni-based WC/Cr3C2 coating prepared by laser cladding[J].Laser & Optoelectronics Progress, 2011(9):82(in Chinese).
34 薛敏鹏, 韩彬, 王勇 , 等. 激光熔覆Ni基WC/Cr3C2涂层显微组织和耐蚀性研究[J].激光与光电子学进展, 2011(9):82.
35 Liu H, Wang C, Zhang X , et al. Improving the corrosion resistance and mechanical property of 45 steel surface by laser cladding with Ni60CuMoW alloy powder[J]. Surface & Coatings Technology, 2013,228(8):S296.
36 Zhang Z, Farahmand P, Kovacevic R . Laser cladding of 420 stainless steel with molybdenum on mild steel A36 by a high power direct diode laser[J]. Materials & Design, 2016,109:686.
37 Guo C, Zhou J, Chen J , et al. High temperature wear resistance of laser cladding NiCrBSi and NiCrBSi/WC-Ni composite coatings[J]. Wear, 2011,270(7):492.
38 Zhang J, Yu H U, Tan X J , et al. Microstructure and high temperature tribological behavior of laser cladding Ni60A alloys coatings on 45 steel substrate[J]. Transactions of Nonferrous Metals Society of China, 2015,25(5):1525.
39 Dong S Y, Zhang X D, Xu B S , et al. Laser cladding remanufactu-ring of 45 steel camshaft worn cam[J]. Journal of Academy of Armored Force Engineering, 2011,25(2):85(in Chinese).
39 董世运, 张晓东, 徐滨士 , 等. 45钢凸轮轴磨损凸轮的激光熔覆再制造[J]. 装甲兵工程学院学报, 2011,25(2):85.
40 Kusmoko A, Dunne D, Li H , et al. Effect of two different energy inputs for laser cladding of Stellite 6 on P91 and P22 steel substrates[J]. Procedia Materials Science, 2014,6(6):26.
41 Yang J X, Hu X, Wang Y F . Microstructure and properties of laser additive manufacturing TC bearing[J]. Journal of Materials Engineering, 2016,44(7):61(in Chinese).
41 杨胶溪, 胡星, 王艳芳 . TC轴承激光增材制造工艺及组织性能研究[J]. 材料工程, 2016,44(7):61.
42 Qin R, Zhang X, Guo S , et al. Laser cladding of high Co-Ni secon-dary hardening steel on 18Cr2Ni4WA steel[J]. Surface & Coatings Technology, 2015,285:242.
43 Zhao G M, Wang K L, Li C G . Effect of La2O3 on wear resistance of laser-cladded Fe-based alloy coatings[J]. Tribology, 2004,24(4):318(in Chinese).
43 赵高敏, 王昆林, 李传刚 . 稀土对Fe基合金激光熔覆层抗磨性能的影响[J]. 摩擦学学报, 2004,24(4):318.
44 Kattire P, Paul S, Singh R , et al. Experimental characterization of laser cladding of CPM 9V on H13 tool steel for die repair applications[J]. Journal of Manufacturing Processes, 2015,20:492.
45 Zhao X Y, Liu Y, Xia Y L , et al. Mictrostructure and wear resis-tance of TiC/Ni based alloy composite coatings on H13 steel by laser cladding[J]. Transactions of Materials and Heat Treatment, 2016,37(4):190(in Chinese).
45 赵雪阳, 刘英, 夏一龙 , 等. H13钢激光熔覆TiC/Ni合金复合涂层的组织与耐磨性[J]. 材料热处理学报, 2016,37(4):190.
46 Pang G, Li Z, Chen Z . Electron brush-plating technique of Cr12MoV die steel and its wear resistance[J]. Rare Metal Materials and Engineering, 2012,41(s1):180.
47 Yuan T, Cai Y C, Luo Z , et al. Effect of Al2O3 composite ceramic reinforcement on wear behavior of laser cladding Ni-based alloys coatings[J]. Journal of Shanghai Jiao Tong University, 2016,50(10):1635(in Chinese).
47 袁涛, 蔡养川, 罗震 , 等. Al2O3陶瓷颗粒对镍基合金涂层耐磨性能的影响[J]. 上海交通大学学报, 2016,50(10):1635.
48 Ding Y X, Wang B . Research on technology of laser cladding Ni/WC Cr12MoV mould steel surface[J].Modern Manufacturing Enginee-ring, 2011(5):97(in Chinese).
48 丁阳喜, 王炳 . Cr12MoV模具钢表面激光熔覆Ni/WC合金工艺研究[J].现代制造工程, 2011(5):97.
49 Pereira J, Zambrano J, Licausi M , et al. Tribology and high tempe-rature friction wear behavior of MCrAlY laser cladding coatings on stainless steel[J]. Wear, 2015,330:280.
50 Singh R, Kumar D, Mishra S K , et al. Laser cladding of Stellite 6 on stainless steel to enhance solid particle erosion and cavitation resistance[J]. Surface & Coatings Technology, 2014,251(29):87.
51 Li K, Li D, Liu D , et al. Microstructure evolution and mechanical properties of multiple-layer laser cladding coating of 308L stainless steel[J]. Applied Surface Science, 2015,340:143.
52 Kim Y H, Lee D J, Byun J C , et al. The effect of sigma phases formation depending on Cr/Ni equivalent ratio in AISI 316L weldments[J]. Materials & Design, 2011,32(1):330.
53 Ganesh P, Moitra A, Tiwari P , et al. Fracture behavior of laser-clad joint of Stellite 21 on AISI 316L stainless steel[J]. Materials Science & Engineering A, 2010,527(16-17):3748.
54 Zhao W Y, Lu F G, Li Z G , et al. Study on high-cycle fatigue behavior of laser-cladding Stellite6 on 17-4PH stainless steel[J]. Chinese Journal of Lasers, 2014,41(10):125(in Chinese).
54 赵文雨, 芦凤桂, 李铸国 , 等. 17-4PH不锈钢表面激光熔覆Stellite6合金涂层高周疲劳行为研究[J]. 中国激光, 2014,41(10):125.
55 Contin A, Vasconcelos G D, Barquete D M , et al. Laser cladding of SiC multilayers for diamond deposition on steel substrates[J]. Diamond & Related Materials, 2016,65:105.
56 Golmakaniyoon S, Mahmudi R . Microstructure and creep behavior of the rare-earth doped Mg-6Zn-3Cu cast alloy[J]. Materials Science & Engineering A, 2011,528(3):1668.
57 Zhao Y H, Sun J, Li J F . Effect of Cu on properties of FeCr laser cladding layer and machining vibration suppressing in side milling[J].Chinese Journal of Lasers, 2015(3):53(in Chinese).
57 赵彦华, 孙杰, 李剑峰 . 铜元素对FeCr合金激光熔覆层性能影响及铣削加工减振机理研究[J].中国激光, 2015(3):53.
[1] 姜志鹏, 陈小明, 赵坚, 张磊, 伏利, 刘伟. 激光熔覆技术制备非晶涂层的研究进展与展望[J]. 材料导报, 2019, 33(z1): 191-194.
[2] 平学龙, 符寒光, 孙淑婷. 激光熔覆制备硬质颗粒增强镍基合金复合涂层的研究进展[J]. 材料导报, 2019, 33(9): 1535-1540.
[3] 谢敏, 王梅丰, 戴晓琴, 雷剑波, 王春霞, 周圣丰. 综论偏晶合金的制备技术:外场下凝固、快速凝固及激光技术[J]. 材料导报, 2019, 33(3): 490-499.
[4] 刘健健,朱诚意,李光强. 连铸结晶器铜板表面涂镀层应用研究进展[J]. 材料导报, 2019, 33(17): 2831-2838.
[5] 蒋智秋, 陈泉志, 董婉冰, 童庆, 李伟洲. Al对激光熔覆镍基合金涂层组织与性能的影响[J]. 材料导报, 2019, 33(12): 2035-2039.
[6] 郑丽娟, 付宇明, 宗磊, 齐童. 交变磁场对高硬熔覆层成型质量的影响[J]. 材料导报, 2018, 32(6): 905-908.
[7] 葛茂忠, 项建云, 范真. 激光熔覆修复对TC4钛合金疲劳裂纹扩展速率的影响[J]. 材料导报, 2018, 32(16): 2803-2808.
[8] 张天刚, 孙荣禄, 张雪洋, 刘亚楠. Ti811表面激光熔覆原位合成TiC-TiB2复合Ti基涂层的微观组织分析[J]. 《材料导报》期刊社, 2018, 32(13): 2208-2213.
[9] 张天刚,孙荣禄,安通达,张宏伟. Ti811表面单道与多道TC4激光熔覆层微观组织对比[J]. 《材料导报》期刊社, 2018, 32(12): 1983-1987.
[10] 赵钦,马国政,王海斗,李国禄,陈书赢,周羊羊. 高熵合金涂层制备及其应用的研究进展*[J]. 《材料导报》期刊社, 2017, 31(7): 65-71.
[11] 孙有政, 刘帅, 李进宝, 刘常升. 铁含量对激光熔覆层微结构及性能的影响*[J]. 《材料导报》期刊社, 2017, 31(4): 75-78.
[12] 张天刚, 孙荣禄. TC4表面单道与多道搭接激光熔覆自润滑涂层微观组织对比研究*[J]. 《材料导报》期刊社, 2017, 31(4): 47-51.
[13] 杨 丹,宁玉恒,赵宇光,朱国斌,徐晓峰. 工艺参数对304不锈钢表面激光熔覆Ni基合金涂层的组织、耐磨性及耐腐蚀性的影响[J]. 《材料导报》期刊社, 2017, 31(24): 133-140.
[14] 肖轶,顾剑锋,张俊喜,杨有利. 纳米CeO2对激光熔覆Fe/Cr3C2复合涂层组织与磨损性能的影响*[J]. 材料导报编辑部, 2017, 31(22): 65-69.
[15] 龚玉兵, 王善林, 张子阳, 李宏祥, 陈玉华. 基于工业合金激光熔覆制备Fe基非晶涂层*[J]. 《材料导报》期刊社, 2017, 31(16): 98-102.
[1] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[2] Huimin PAN,Jun FU,Qingxin ZHAO. Sulfate Attack Resistance of Concrete Subjected to Disturbance in Hardening Stage[J]. Materials Reports, 2018, 32(2): 282 -287 .
[3] Siyuan ZHOU,Jianfeng JIN,Lu WANG,Jingyi CAO,Peijun YANG. Multiscale Simulation of Geometric Effect on Onset Plasticity of Nano-scale Asperities[J]. Materials Reports, 2018, 32(2): 316 -321 .
[4] Xu LI,Ziru WANG,Li YANG,Zhendong ZHANG,Youting ZHANG,Yifan DU. Synthesis and Performance of Magnetic Oil Absorption Material with Rice Chaff Support[J]. Materials Reports, 2018, 32(2): 219 -222 .
[5] Ninghui LIANG,Peng YANG,Xinrong LIU,Yang ZHONG,Zheqi GUO. A Study on Dynamic Compressive Mechanical Properties of Multi-size Polypropylene Fiber Concrete Under High Strain Rate[J]. Materials Reports, 2018, 32(2): 288 -294 .
[6] XU Zhichao, FENG Zhongxue, SHI Qingnan, YANG Yingxiang, WANG Xiaoqi, QI Huarong. Microstructure of the LPSO Phase in Mg98.5Zn0.5Y1 Alloy Prepared by Directional Solidification and Its Effect on Electromagnetic Shielding Performance[J]. Materials Reports, 2018, 32(6): 865 -869 .
[7] ZHOU Rui, LI Lulu, XIE Dong, ZHANG Jianguo, WU Mengli. A Determining Method of Constitutive Parameters for Metal Powder Compaction Based on Modified Drucker-Prager Cap Model[J]. Materials Reports, 2018, 32(6): 1020 -1025 .
[8] WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing[J]. Materials Reports, 2017, 31(1): 64 -71 .
[9] HUANG Dajian, MA Zonghong, MA Chenyang, WANG Xinwei. Preparation and Properties of Gelatin/Chitosan Composite Films Enhanced by Chitin Nanofiber[J]. Materials Reports, 2017, 31(8): 21 -24 .
[10] YUAN Xinjian, LI Ci, WANG Haodong, LIANG Xuebo, ZENG Dingding, XIE Chaojie. Effects of Micro-alloying of Chromium and Vanadium on Microstructure and Mechanical Properties of High Carbon Steel[J]. Materials Reports, 2017, 31(8): 76 -81 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed