Please wait a minute...
《材料导报》期刊社  2017, Vol. 31 Issue (18): 146-149    https://doi.org/10.11896/j.issn.1005-023X.2017.018.029
  计算模拟 |
高氮奥氏体不锈钢中N与Cr、Mn、Mo键合性质研究*
张旭昀1,2, 郑冰洁2, 郭斌1, 吴戆2, 王文泉2, 王勇2
1 哈尔滨工业大学材料科学与工程学院,哈尔滨 150001;
2 东北石油大学机械科学与工程学院,大庆 163318
Theoretical Study on Bonding Characteristics of Cr, Mn, Mo and N in High Nitrogen Austenitic Stainless Steel
ZHANG Xuyun1,2, ZHENG Bingjie2, GUO Bin1, WU Zhuang2, WANG Wenquan2, WANG Yong2
1 School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001;
2 School of Mechanical Science and Engineering, Northeast Petroleum University, Daqing 163318
下载:  全 文 ( PDF ) ( 1364KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 采用基于密度泛函理论的第一性原理计算方法对高氮奥氏体不锈钢中N与Cr、Mn、Mo键合性质进行研究。建立Fe-N-Cr、Fe-N-Mn及Fe-N-Mo晶胞,并对其电子结构进行计算,通过计算其晶胞总能量、体积変化率、电子态密度、重叠聚居数和电荷密度等电子结构参数,分析高氮奥氏体不锈钢中N与合金元素Cr、Mn、Mo的键合性质。结果表明:Cr、Mn、Mo取代顶角位置Fe原子时结构最稳定;N与Cr、Mn、Mo原子间存在离子键,成键轨道主要是N 2p与Cr、Mn、Mo的3d轨道;Fe、N与Cr、Mn、Mo 原子存在交互排斥作用,形成反键。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
张旭昀
郑冰洁
郭斌
吴戆
王文泉
王勇
关键词:  高氮奥氏体不锈钢  第一性原理  键合性质    
Abstract: The bonding characteristics of N with Cr, Mn, Mo in the high nitrogen austenitic stainless steels were studied by the first principles based on density functional theory. The electronic structures of Fe-N-Cr,Fe-N-Mn and Fe-N-Mo unit cell were calculated. The bonding characteristics of N with Cr, Mn, Mo in the high nitrogen austenitic stainless steels were analyzed by calculation of the electronic structure parameters, such as energy, charge density, overlap population and density of states. The results showed that the structure was more stable when the vertex positions of the Fe atom in the unit cell structure was replaced by the Cr, Mn, Mo atoms. There existed electrovalent bonds between N atom and Cr, Mn, Mo atoms, and bond orbitals were mainly composed of 3d orbital of Cr, Mn, Mo atoms. There was a mutual exclusion effect among Fe, N and Cr, Mn, Mo atoms, which led to the formation of an anti-bonding.
Key words:  high nitrogen austenitic stainless steel    first principles    bond characteristic
出版日期:  2017-09-25      发布日期:  2018-05-08
ZTFLH:  TG144  
基金资助: 国家自然科学基金(51401051);黑龙江省应用技术研究与开发计划项目(GA13A402)
通讯作者:  王勇:通讯作者,男,1979年生,博士,副教授,从事材料腐蚀与防护教学和研究工作 E-mail:wangyongsll@163.com   
作者简介:  张旭昀:男,1973年生,博士,教授,从事材料科学与工程的教学和研究工作 E-mail:zxydqpi@sina.com
引用本文:    
张旭昀, 郑冰洁, 郭斌, 吴戆, 王文泉, 王勇. 高氮奥氏体不锈钢中N与Cr、Mn、Mo键合性质研究*[J]. 《材料导报》期刊社, 2017, 31(18): 146-149.
ZHANG Xuyun, ZHENG Bingjie, GUO Bin, WU Zhuang, WANG Wenquan, WANG Yong. Theoretical Study on Bonding Characteristics of Cr, Mn, Mo and N in High Nitrogen Austenitic Stainless Steel. Materials Reports, 2017, 31(18): 146-149.
链接本文:  
https://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2017.018.029  或          https://www.mater-rep.com/CN/Y2017/V31/I18/146
1 卡曼奇U,曼德里R,贝德威. 高氮钢和不锈钢——生产,性能与应用[M].李晶,黄运华,译.北京:化学工业出版社,2006:88.
2 Simmons J W. Overview: High-nitrogen alloying of stainless steels[J]. Mater Sci A, 1996,207(2):159.
3 Liu Ming, Lang Yuping, Sun Yong, et al. Research on hot defor-mation behavior of high nitrogen nickel-free austenitic stainless steel[J]. Hot Working Technol, 2014,43(24):98(in Chinese).
刘明, 郎宇平, 孙勇,等. 高氮无镍奥氏体不锈钢热变形行为的研究[J]. 热加工工艺, 2014,43(24):98.
4 Wu Hao, Xu Guifang, Yan Yu, et al. Pitting corrosion resistance of a new high nitrogen and low nickel austenitic stainless steel[J]. Heat Treatment Metals, 2015,40(12):11(in Chinese).
吴浩, 徐桂芳, 严羽,等. 新型高氮低镍奥氏体不锈钢的点蚀性能[J]. 金属热处理, 2015,40(12):11.
5 姜周华, 朱红春, 李花兵,等. 高氮不锈钢开发和应用的最新进展[C]∥宝钢学术年会. 上海,2015.
6 Behjati P, Kermanpur A, Najafizadeh A. Influence of nitrogen alloying on properties of Fe318Cr312Mn3XN austenitic stainless steels[J]. Mater Sci Eng A, 2013,588(24):43
7 López D, Falleiros N A, Tschiptschin A P. Effect of nitrogen on the corrosion-erosion synergism in an austenitic stainless steel[J]. Tribology Int, 2011,44(5):610.
8 Feichtinger H, Stein G. Melting of high nitrogen steels[J]. Mater Sci Forum, 1999,318-320(24):261.
9 Lang Yuping, Chen Haitao, Weng Yuqing, et al. Applications of thermo-calc in research of high nitrogen austenitic stainless steels[J]. J Mater Eng,2013(5):16(in Chinese).
郎宇平, 陈海涛, 翁宇庆,等. 热力学计算在高氮奥氏体不锈钢研究中的应用[J]. 材料工程, 2013(5):16.
10Yang Biao, Wang Lige, Yi Yong, et al. First-principles calculations of the diffusion b ehaviors of C, N and O atoms in V metal[J]. Acta Phys Sin, 2015,64(2):356(in Chinese).
杨彪, 王丽阁, 易勇,等. C,N,O原子在金属V中扩散行为的第一性原理计算[J]. 物理学报, 2015,64(2):356.
11Wang Mingjun, Li Chunfu, Wen Ping, et al. The bond characters and phase stability effects of Cr Mo and Ni in bulk γ-Fe(C) [J]. Acta Phys Sin, 2016, 65(3):246(in Chinese).
王明军, 李春福, 文平,等. Cr,Mo,Ni在γ-Fe(C)中的键合性质及对相结构稳定性的影响[J]. 物理学报, 2016,65(3):246.
12Segall M D, Lindan P J D, Probert M J, et al. First-principles simulation: Ideas, illustrations and the castep code[J]. J Phys Condens Mattter, 2002,14(11):2717.
13Marlo M,Milman V.Density-functional study of bulk and surface properties of titanium nitride using different exchange-correlation functional[J]. Phys Rev B,2000,62( 4):2899.
14Vanderbilt D. Soft self-consistent pesudopotentials in a generalized eigenvalue formalism[J]. Phys Rev B,1990,41(11):7892.
15Ha H, Kwon H. Effects of Cr2N on the pitting corrosion of high nitrogen stainless steels [J]. Electrochim Acta,2007,52(5):2175.
16Chen Hongtao. Study on phase structure and properties of low temperature rare earth nitrocarburized layer of austente stainless steel[D]. Harbin: Harbin Institute of Technology, 2014(in Chinese).
陈宏涛. 奥氏体不锈钢低温稀土氮碳共渗层相结构及其性质研究[D]. 哈尔滨:哈尔滨工业大学, 2014.
[1] 吴迪, 林方敏, 张洪龙, 宋孟, 杨永, 殷兆良, 章小峰. 合金元素对bcc-Cu/NiAl共析出影响的第一性原理研究[J]. 材料导报, 2024, 38(9): 22070183-6.
[2] 苗瑞霞, 张德栋, 谢妙春, 王业飞, 杨小峰. 本征缺陷对δ-InSe光电性质的影响[J]. 材料导报, 2024, 38(23): 23080234-7.
[3] 范依航, 李政译, 郝兆朋. 切削镍基高温合金Ni、Fe、Cr原子在WC-Co硬质合金刀具中的扩散机制及对刀具性能的影响[J]. 材料导报, 2024, 38(23): 23070211-9.
[4] 赵永生, 阎峰云, 刘雪. B掺杂对金刚石热导率的影响[J]. 材料导报, 2024, 38(20): 23080238-8.
[5] 王勇, 孙天昊, 李永存, 孙丽丽, 贾鑫, 张旭昀. 高压下NbMoTaWV难熔高熵合金结构和力学性能的第一性原理研究[J]. 材料导报, 2024, 38(18): 22120037-6.
[6] 冯文彪, 李鑫, 张亚龙. Mg3Sb2合金中Mg空位对电子传输性能的影响[J]. 材料导报, 2024, 38(17): 22110149-7.
[7] 彭超, 赵勇, 张芳, 龙旭, 林金保, 常超. TixNbMoTaW系高熵合金性能的第一性原理计算[J]. 材料导报, 2024, 38(15): 23040229-8.
[8] 张琦祥, 苑峻豪, 李震, 李文杰, 孙丹, 王清, 董闯. 基于第一性原理计算的固溶体合金集成学习设计方法[J]. 材料导报, 2024, 38(13): 23030089-8.
[9] 生健平, 喻明富, 李洁, 孙红. 基于V2C催化剂的混合电解质锂空气电池催化机理研究[J]. 材料导报, 2024, 38(10): 23030161-7.
[10] 刘晨曦, 庞国旺, 潘多桥, 史蕾倩, 张丽丽, 雷博程, 赵旭才, 黄以能. S和Al掺杂单层g-C3N4电子结构与光学性质的第一性原理研究[J]. 材料导报, 2023, 37(9): 21100044-6.
[11] 余瑞, 张永安, 李亚楠, 李锡武, 李志辉, 闫丽珍, 温凯, 熊柏青. Zn对Al-Mg-Si合金时效析出相稳定性影响的第一性原理研究[J]. 材料导报, 2023, 37(4): 21040034-5.
[12] 范青青, 安立宝, 常春蕊, 张志明, 贾晓彤. 石墨烯负载Pdn(n=1—3)原子/团簇吸附三氯甲烷分子的第一性原理研究[J]. 材料导报, 2023, 37(21): 22050174-6.
[13] 才文文, 贺勇, 张敏, 史俊杰. AZrX3(A=Ba, Ca;X=S, Se,Te)钙钛矿结构及光电特性的第一性原理研究[J]. 材料导报, 2023, 37(2): 21070076-6.
[14] 林博文, 徐亦冬, 余德密. MgAl-LDHs/TiO2复合光催化剂的制备及光催化性能[J]. 材料导报, 2023, 37(19): 22050098-6.
[15] 马柯榕, 张浩, 张永帅, 李坤, 杜秀娟, 杨雯. Mn在铁素体Fe-25%Cr合金中的迁移行为研究[J]. 材料导报, 2023, 37(19): 22040395-5.
[1] Wei ZHOU, Xixi WANG, Yinlong ZHU, Jie DAI, Yanping ZHU, Zongping SHAO. A Complete Review of Cobalt-based Electrocatalysts Applying to Metal-Air Batteries and Intermediate-Low Temperature Solid Oxide Fuel Cells[J]. Materials Reports, 2018, 32(3): 337 -356 .
[2] Dongyong SI, Guangxu HUANG, Chuanxiang ZHANG, Baolin XING, Zehua CHEN, Liwei CHEN, Haoran ZHANG. Preparation and Electrochemical Performance of Humic Acid-based Graphitized Materials[J]. Materials Reports, 2018, 32(3): 368 -372 .
[3] Yunzi LIU,Wei ZHANG,Zhanyong SONG. Technological Advances in Preparation and Posterior Treatment of Metal Nanoparticles-based Conductive Inks[J]. Materials Reports, 2018, 32(3): 391 -397 .
[4] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[5] Yingke WU,Jianzhong MA,Yan BAO. Advances in Interfacial Interaction Within Polymer Matrix Nanocomposites[J]. Materials Reports, 2018, 32(3): 434 -442 .
[6] Zhengrong FU,Xiuchang WANG,Qinglin JIN,Jun TAN. A Review of the Preparation Techniques for Porous Amorphous Alloys and Their Composites[J]. Materials Reports, 2018, 32(3): 473 -482 .
[7] Fangyuan DONG,Shansuo ZHENG,Mingchen SONG,Yixin ZHANG,Jie ZHENG,Qing QIN. Research Progress of High Performance ConcreteⅡ: Durability and Life Prediction Model[J]. Materials Reports, 2018, 32(3): 496 -502 .
[8] Lixiong GAO,Ruqian DING,Yan YAO,Hui RONG,Hailiang WANG,Lei ZHANG. Microbial-induced Corrosion of Concrete: Mechanism, Influencing Factors,Evaluation Indices, and Proventive Techniques[J]. Materials Reports, 2018, 32(3): 503 -509 .
[9] Ningning HE,Chenxi HOU,Xiaoyan SHU,Dengsheng MA,Xirui LU. Application of SHS Technique for the High-level Radioactive Waste Disposal[J]. Materials Reports, 2018, 32(3): 510 -514 .
[10] Haoran CHEN, Yingdong XIA, Yonghua CHEN, Wei HUANG. Low-dimensional Perovskites: a Novel Candidate Light-harvesting Material for Solar Cells that Combines High Efficiency and Stability[J]. Materials Reports, 2018, 32(1): 1 -11 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed