Please wait a minute...
《材料导报》期刊社  2018, Vol. 32 Issue (8): 1258-1262    https://doi.org/10.11896/j.issn.1005-023X.2018.08.010
  材料研究 |
洋葱状纳米碳烟颗粒在基础油中的摩擦学性能
苏鹏1, 熊云1, 刘晓1, 杨鹤2, 范林君1
1 陆军勤务学院油料系,重庆 401311;
2 中石化石油化工科学研究院,北京 100049
Tribological Behavior of Onion-like Soot Nanoparticles in Base Oil
SU Peng1, XIONG Yun1, LIU Xiao1, YANG He2, FAN Linjun1
1 Department of Oil, Army Logistics University of PLA, Chongqing 401311;
2 Sinopec Research Institute of Petroleum Processing, Beijing 100049
下载:  全 文 ( PDF ) ( 2572KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 在SRV IV摩擦磨损试验机上,采用球-盘接触方式考察了不同载荷下碳烟颗粒在150SN基础油中的摩擦学性能。借助三维表面形貌仪、扫描电子显微镜、能谱仪、X射线光电子能谱仪及拉曼光谱探讨了载荷诱导的碳烟颗粒的减摩作用机理。结果表明,载荷对碳烟颗粒在150SN基础油中摩擦学特性有较大影响。低载荷时,碳烟颗粒可以改善基础油的抗磨性能;高载荷时,碳烟能够改善基础油的减摩性。载荷诱导的碳烟颗粒的减摩机理与其洋葱状的纳米结构有关,高载荷下碳烟颗粒外层的石墨微晶被剥离,在摩擦副表面形成了减摩层,使摩擦系数下降。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
苏鹏
熊云
刘晓
杨鹤
范林君
关键词:  洋葱状纳米碳烟颗粒  基础油  摩擦学性能    
Abstract: Tribological behavior of diesel soot in 150SN base oil was investigated under different load by using ball-disc reciprocating mode on the SRV IV oscillating reciprocating friction and wear tester. The three dimensional surface profilometer, scanning electron microscopy, energy-dispersive spectrometry, X-ray photoelectron spectroscopy and Raman spectroscopy were utilized to investigate the friction reducing mechanism of diesel soot under high load. The results showed that load had great influence on the tribological property of diesel soot. Diesel soot could improve the anti-wear property of 150SN base oil under low load, while it could improve the anti-friction property under high load. The friction reducing mechanisms of load-induced diesel soot was related with its onion-like structure. The outer shell graphite carbon of diesel soot could be peeled off under high load, which formed new lubricating films on the friction pairs to reduce friction coefficient.
Key words:  onion-like soot nanoparticle    base oil    tribological property
出版日期:  2018-04-25      发布日期:  2018-05-11
ZTFLH:  TK6  
基金资助: 全军后勤科研计划重点项目(BX214C006);重庆高校优秀成果转化资助项目(KJZH17139)
通讯作者:  通信作者,男,1962年生,博士,教授,博士研究生导师,主要从事油品应用研究 E-mail:xy0000001@sina.cn   
作者简介:  男,1989年生,博士研究生,主要从事润滑油添加剂、摩擦化学方面的研究 E-mail:su_peng@foxmail.com
引用本文:    
苏鹏, 熊云, 刘晓, 杨鹤, 范林君. 洋葱状纳米碳烟颗粒在基础油中的摩擦学性能[J]. 《材料导报》期刊社, 2018, 32(8): 1258-1262.
SU Peng, XIONG Yun, LIU Xiao, YANG He, FAN Linjun. Tribological Behavior of Onion-like Soot Nanoparticles in Base Oil. Materials Reports, 2018, 32(8): 1258-1262.
链接本文:  
https://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2018.08.010  或          https://www.mater-rep.com/CN/Y2018/V32/I8/1258
1 刘治中,许世海,姚如杰.液体燃料的性质及应用[M].北京:中国石化出版社,2000:269.
2 Green D A, Lewis R. The effects of soot-contaminated engine oil on wear and friction: A review[J].Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering,2008,222:1669.
3 Aldajah S, Ajayi O O, Fenske G R, et al. Effect of exhaust gas recirculation (EGR) contamination of diesel engine oil on wear[J].Wear,2007,263:93.
4 Liu Tianxia, Hu Enzhu. Composition and structure as well as tribological performance of bio-fuel soot[J].Tribology,2014,34(4):379(in Chinese).
刘天霞,胡恩柱.生物质燃油碳烟的组成和结构以及摩擦学特性研究[J].摩擦学学报,2014,34(4):379.
5 Liu Congmin, Shuzo Nemoto, Satoshi Ogano. Effect of soot properties in diesel engine oils on frictional characteristics[J].Tribology Transaction,2003,46(1):12.
6 Green D A, Lewis R, Dwyer-Joyce R S. Wear effects and mechanisms of soot-contaminated automotive lubricants[J].Proceedings of the Institution of Mechanical Engineers, Part J:Joumal of Enginee-ring Tribology,2006,220(3):159.
7 George S, Balla S, Gautuam M. Effect of diesel soot contaminated oil on engine wear[J].Wear,2007,262(9):1113.
8 Su P, Xiong Y, Liu X, et al. Morphology and structure as well as tribological behavior of diesel soot[J].Tribology,2017,37(1):83(in Chinese).
苏鹏,熊云,刘晓,等.柴油发动机碳烟的表征及摩擦学特性研究[J].摩擦学学报,2017,37(1):83.
9 John J Truhan, Jun Qu, Peter J Blau. A rig test to measure friction and wear of heavy duty diesel engine piston rings and cylinder liners using realistic lubricants[J].Tribology International,2005,38:211.
10 Patel M, Aswath P B. Morphology, structure and chemistry of extracted diesel soot: Part I: Transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and synchrotron X-ray diffraction study[J].Tribology International,2012,52:17.
11 Dairene Uy. Characterization of gasoline soot and comparison to diesel soot:Morphology, chemistry, and wear[J].Tribology International,2014,80:198.
12 Wei J X,Cai M R,Zhou F,et al.Candle soot as particular lubricant additives[J].Tribology Letters,2014,53(3):521.
13 Yan J H, Yan D H, Chi Y, et al. Chemical structure of C in carbon blacks from pyrolysis of used tires in pilot-scale rotary kiln[J].Journal of Chemical Industry and Engineering,2006,57(1):109(in Chinese).
严建华,闫大海,池涌,等.废轮胎回转窑中试热解炭中碳元素化学形态[J].化工学报,2006,57(1):109.
14 Darmstadt H, Roy C. Characterization of pyrolytic carbon blacks from commercial tire pyrolysis plants[J].Carbon,1995,33(10):1449.
15 Sadezky A, Muckenhuber H, Grothe H, et al. Raman micro spectroscopy of soot and related carbonaceous materials: Spectral analysis and structural information[J].Carbon,2005,43(2):1731.
16 Roy D, Chhowalla M, Wang H, et al. Characterization of carbon nano-onions using Raman spectroscopy[J].Chemical Physics Letters,2003,373(1):52.
[1] 于凯, 王静静, 刘平, 马迅, 张柯, 马凤仓, 李伟. 二硫化钼自润滑涂层性能及制备工艺的研究进展[J]. 材料导报, 2024, 38(7): 22080088-10.
[2] 董颖辉, 陈飞寰, 蔡召兵, 林广沛, 卢冰文, 张坡, 古乐. 激光熔覆MoNbTaVW难熔高熵合金涂层微动磨损性能[J]. 材料导报, 2024, 38(7): 22100174-6.
[3] 谢晓明, 沈鹰, 刘秀波, 朱正兴, 李明曦. Mn含量对激光熔覆FeCoCrNiMnx高熵合金涂层高温摩擦学性能的影响[J]. 材料导报, 2024, 38(23): 23120066-9.
[4] 何东青, 冯子涵, 郑文文, 李文生, 尚伦霖. Cr3C2-NiCr/AlCrN复合涂层高温摩擦学行为研究[J]. 材料导报, 2024, 38(21): 23060112-7.
[5] 晁昀暄, 戴乐阳, 魏钰坤, 王永坚, 杜金洪. 磺酸钙/油酸改性碳基二硫化钼的制备及在乳化油中的摩擦学性能[J]. 材料导报, 2024, 38(2): 22090049-7.
[6] 操慧珺, 李韦承, 张天刚, 张宏伟, 张志强. TC4表面WC/Ni-MoS2钛基复合涂层组织与摩擦学性能[J]. 材料导报, 2024, 38(15): 24020099-8.
[7] 王慧鹏, 李鹏, 王喜茂, 郭伟玲, 马国政, 王海斗. 冷喷涂温度对Cu-Ti3AlC2复合涂层微观组织及摩擦学性能的影响[J]. 材料导报, 2024, 38(15): 23030288-9.
[8] 杨长兴, 王固霞, 郭生伟. 油酸改性石墨相氮化碳的制备、表征及摩擦学性能研究[J]. 材料导报, 2023, 37(23): 22100019-7.
[9] 王整, 蔡召兵, 陈飞寰, 董颖辉, 张坡, 陈娟, 古乐, 曾良才. 环境和法向载荷对(TiVCrAlMo)N高熵合金薄膜摩擦学性能的影响[J]. 材料导报, 2023, 37(18): 22050049-7.
[10] 于天阳, 马国政, 郭伟玲, 何鹏飞, 黄艳斐, 刘明, 王海斗. 冷喷涂不同陶瓷含量Cu-Ti3SiC2复合涂层的微观组织及性能研究[J]. 材料导报, 2022, 36(7): 21120172-6.
[11] 熊光耀, 李圣鑫, 李波, 沈明学. 面向低温环境的聚合物摩擦学性能及其改性研究进展[J]. 材料导报, 2022, 36(3): 20070001-6.
[12] 霍丽霞, 苟世宁, 郭芳君, 贺颖, 冯凯, 周晖, 张凯锋. 溶胶-凝胶法制备聚酰胺-酰亚胺粘结MoS2/SiOx固体润滑涂层及其真空摩擦学性能研究[J]. 材料导报, 2022, 36(22): 22050078-5.
[13] 杨文涛, 何鹏飞, 刘明, 周永欣, 王海斗, 白宇, 李青. 热处理工艺对铝硅合金显微组织和性能影响的研究现状[J]. 材料导报, 2022, 36(11): 20080038-9.
[14] 郭竟尧, 侯显斌, 魏钰坤, 戴乐阳, 廖海峰, 孙迪. 纳米偏硼酸钙/还原石墨烯润滑添加剂的制备及摩擦学性能[J]. 材料导报, 2021, 35(20): 20011-20015.
[15] 王永欣, 胡艺纹, 赵海超, 李金龙, 王春婷, 毛金明, 王立平, 薛群基. 石墨烯基水润滑添加剂研究进展[J]. 材料导报, 2021, 35(19): 19055-19061.
[1] Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Reports, 2018, 32(3): 373 -377 .
[2] Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors[J]. Materials Reports, 2018, 32(3): 378 -383 .
[3] Congshuo ZHAO,Zhiguo XING,Haidou WANG,Guolu LI,Zhe LIU. Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix[J]. Materials Reports, 2018, 32(3): 418 -426 .
[4] Huaibin DONG,Changqing LI,Xiahui ZOU. Research Progress of Orientation and Alignment of Carbon Nanotubes in Polymer Implemented by Applying Electric Field[J]. Materials Reports, 2018, 32(3): 427 -433 .
[5] Xiaoyu ZHANG,Min XU,Shengzhu CAO. Research Progress on Interfacial Modification of Diamond/Copper Composites with High Thermal Conductivity[J]. Materials Reports, 2018, 32(3): 443 -452 .
[6] Anmin LI,Junzuo SHI,Mingkuan XIE. Research Progress on Mechanical Properties of High Entropy Alloys[J]. Materials Reports, 2018, 32(3): 461 -466 .
[7] Qingqing DING,Qian YU,Jixue LI,Ze ZHANG. Research Progresses of Rhenium Effect in Nickel Based Superalloys[J]. Materials Reports, 2018, 32(1): 110 -115 .
[8] Yaxiong GUO,Qibin LIU,Xiaojuan SHANG,Peng XU,Fang ZHOU. Structure and Phase Transition in CoCrFeNi-M High-entropy Alloys Systems[J]. Materials Reports, 2018, 32(1): 122 -127 .
[9] Changsai LIU,Yujiang WANG,Zhongqi SHENG,Shicheng WEI,Yi LIANG,Yuebin LI,Bo WANG. State-of-arts and Perspectives of Crankshaft Repair and Remanufacture[J]. Materials Reports, 2018, 32(1): 141 -148 .
[10] Xia WANG,Liping AN,Xiaotao ZHANG,Ximing WANG. Progress in Application of Porous Materials in VOCs Adsorption During Wood Drying[J]. Materials Reports, 2018, 32(1): 93 -101 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed