Please wait a minute...
材料导报编辑部  2018, Vol. 32 Issue (6): 855-859    https://doi.org/10.11896/j.issn.1005-023X.2018.06.001
  材料研究 |
蓝光发射荧光粉Ba3P4O13:Eu2+的发光特性及热稳定性
张欣1, 赵韦人2, 周益羊2, 鲁重瑞2, 廖子锋2
1 广东工业大学艺术与设计学院,广州 510006;
2 广东工业大学物理与光电工程学院,广州 510006
Luminescence Properties and Thermal Stability of Blue Light Emitting Phosphors Ba3P4O13:Eu2+
ZHANG Xin1, ZHAO Weiren2, ZHOU Yiyang2, LU Chongrui2, LIAO Zifeng2
1 Art and Design College, Guangdong University of Technology, Guangzhou 510006;
2 School of Physics & Optoelectronic Engineering, Guangdong University of Technology, Guangzhou 510006;
下载:  全 文 ( PDF ) ( 1658KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 采用固相法在相对较低的温度(~840 ℃)下合成了一种可被紫外光激发的蓝光发射荧光粉α-Ba3-xP4O13:xEu2+,详细研究了其物相、发光特性与荧光热稳定性。在360 nm紫外光的激发下,样品的发射光谱由峰位处于~439 nm的不对称宽带组成。通过激发与发射光谱、荧光寿命测试及结构分析证实该不对称宽峰是由于Eu2+在Ba3P4O13中同时占据多个不同的格位所致。此外,Eu2+在α-Ba3P4O13中的最佳掺杂浓度约为x=0.06,其荧光猝灭机理为电偶极矩-电偶极矩相互作用。与商用绿色荧光粉(Ba,Sr)2SiO4:Eu2+相比,该荧光粉具有更好的热稳定性。α-Ba3P4O13:Eu2+荧光粉有望在紫外激发的白光LED领域得到应用。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
张欣
赵韦人
周益羊
鲁重瑞
廖子锋
关键词:  α-Ba3P4O13:Eu2+;  发光  温度猝灭    
Abstract: An ultraviolet excited blue-light emitting phosphor α-Ba3P4O13:Eu2+ has been synthesized through a solid state reaction method at a relatively low temperature of 840 ℃. The phase purity, luminescence properties and thermal stability of the phosphors have been investigated. Under the excitation of 360 nm ultraviolet light, intense blue emission could be observed and the emission spectrum of α-Ba3P4O13:Eu2+ consisted of a broad and asymmetric emission band centered at ~439 nm. Based on the analysis of the excitation and emission spectra, luminescence decay curves and crystal structure, the broad and asymmetric band could be ascribed to that Eu2+ ions occupy multiple different Ba2+ sites in α-Ba3P4O13. Moreover, the optimal Eu2+ concentration was about 6 mol%, and the dominant concentration quenching mechanism of Eu2+ was the dipole-dipole interaction in this case. Interestingly, α-Ba3P4O13:Eu2+ showed better thermal stability than that of commercial green phosphor (Ba, Sr)2SiO4:Eu2+. The results suggested that α-Ba3P4O13:Eu2+ blue phosphor could find potential application in ultraviolet excited WLEDs.
Key words:  α-Ba3P4O13:Eu2+;    photoluminescence    thermal quenching
出版日期:  2018-03-25      发布日期:  2018-03-25
ZTFLH:  TQ422  
基金资助: 广东省科技计划项目(2014B050505020); 广州市产学研合作创新项目(201704030106)
作者简介:  张欣:女,1980年生,博士研究生,副教授,主要从事工业设计、创新方法研究 E-mail:16833228@qq.com
引用本文:    
张欣, 赵韦人, 周益羊, 鲁重瑞, 廖子锋. 蓝光发射荧光粉Ba3P4O13:Eu2+的发光特性及热稳定性[J]. 材料导报编辑部, 2018, 32(6): 855-859.
ZHANG Xin, ZHAO Weiren, ZHOU Yiyang, LU Chongrui, LIAO Zifeng. Luminescence Properties and Thermal Stability of Blue Light Emitting Phosphors Ba3P4O13:Eu2+. Materials Reports, 2018, 32(6): 855-859.
链接本文:  
https://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2018.06.001  或          https://www.mater-rep.com/CN/Y2018/V32/I6/855
1 Li X F, Budai J D, Liu F, et al. New yellow Ba0.93Eu0.07Al2O4 phosphor for warm-white light-emitting diodes through single-emitting-center conversion[J].Light:Science and Applications,2013,2(1):e50.
2 Kuo T W, Liu W R, Chen T M. High color rendering white light-emitting-diode illuminator using the red-emitting Eu2+-activated CaZnOS phosphors excited by blue LED[J].Optics express,2010,18(8):8187.
3 Yang H, Zhu G, Yuan L, et al. Characterization and luminescence properties of YAG:Ce3+ phosphors by molten salt synthesis[J].Journal of the American Ceramic Society,2012,95(1):49.
4 Kuo T W, Liu W R, Chen T M. Emission color variation of (Ba, Sr)3BP3O12:Eu2+ phosphors for white light LEDs[J].Optics Express,2010,18(3):1888.
5 Liu W R, Chiu Y C, Yeh Y T, et al. Luminescence and energy transfer mechanism in Ca10K(PO4)7:Eu2+, Mn2+ phosphor[J].Journal of the Electrochemical Society,2009,156(7):J165.
6 Song X, Fu R, Agathopoulos S, et al. Luminescence and energy transfer of Mn2+ co-doped SrSi2O2N2:Eu2+ green-emitting phosphors[J].Materials Science and Engineering:B,2009,164(1):12.
7 Ren F Q, Chen D H. Photoluminescence and structural characteristics of a new orange phosphor: Ca2.6Sr 2.4(PO4)3Cl:Eu3+[J].Applied Physics B:Lasers and Optics,2010,98(1):159.
8 Wang Z, Liang H, Wang J, et al. Red-light-emitting diodes fabricated by near-ultraviolet InGaN chips with molybdate phosphors[J].Applied Physics Letters,2006,89(7):071921.
9 Oshio S, Matsuoka T, Tanaka S, et al. Mechanism of particle growth of a BaMgAl10O17:Eu2+ phosphor by firing with AlF3[J].Journal of the Electrochemical Society,1998,145(11):3898.
10 Xie R J, Hirosaki N. Silicon-based oxynitride and nitride phosphors for white LEDs—A review[J].Science and Technology of Advanced Materials,2007,8(7):588.
11 Wu Z C, Liu J, Hou W G, et al. A new single-host white-light-emitting BaSrMg(PO4)2:Eu2+ phosphor for white-light-emitting diodes[J].Journal of Alloys and Compounds,2010,498(2):139.
12 Wan C, Meng J, Zhang F, et al. An efficient blue-emitting phosphor: For white LEDs[J].Solid State Communications,2010,150(31):1493.
13 Qin C, Huang Y, Shi L, et al. Thermal stability of luminescence of NaCaPO4:Eu2+ phosphor for white-light-emitting diodes[J].Journal of Physics D:Applied Physics,2009,42(18):185105.
14 Langguth R P, Osterheld R K, Karl-Kroupa E. Verification by chromatography of the thermal formation of barium and lead tetra-polyphosphates[J].The Journal of Physical Chemistry,1956,60(9):1335.
15 Lagos C C. Luminescence of divalent europium in the BaO-MgO-P2O5 system[J].Journal of the Electrochemical Society,1968,115(12):1271.
16 Millet J M, Parker H S, Roth R S. Syntheses and unit-cell determination of Ba3V4O13 and low-and high-temperature Ba3P4O13[J].Journal of the American Ceramic Society,1986,69(5):103.
17 Bennazha J, Boukhari A, Holt E M. Barium tetraphosphate[J].Acta Crystallographica Section C:Crystal Structure Communications,2002,C58:i29.
[1] 路正楠, 张鹏, 盛扬, 孙一新, MarkBradley, 张嵘. 鲁米诺自发光在聚氨酯光敏剂介导光动力治疗中的应用[J]. 材料导报, 2025, 39(1): 23110275-7.
[2] 甘晓明, 苏玉仙, 应文伟, 王建峰, 刘力, 周晓峰, 温世鹏. 稀土上转换发光材料的设计及在光动力治疗中的应用研究进展[J]. 材料导报, 2024, 38(8): 22080243-12.
[3] 罗文柳, 杨玲, 叶懋, 欧阳竑, 许积文, 唐纳. (K0.5Na0.5)NbO3-(Ca0.5Sm0.5)(Mg0.5Nb0.5)O3铁电陶瓷的光致介电响应与光致发光[J]. 材料导报, 2024, 38(18): 23040126-7.
[4] 蔡心杰, 徐亦冬, 王玉全, 武金婷. 采用持久发光材料为内部光源的光催化复合材料研究进展[J]. 材料导报, 2024, 38(15): 23030157-10.
[5] 林坚, 张松林, 王悦安, 孙浩, 聂钰昌, 陈德睢. 氧化镍空穴材料在Ⅱ-Ⅵ族量子点电致发光器件中的应用进展[J]. 材料导报, 2024, 38(14): 22100205-8.
[6] 刘维赛, 陈晓怡, 智文科, 王旭泉, 王飞. 镧系金属有机框架化合物在发光传感检测领域的研究进展[J]. 材料导报, 2023, 37(5): 21030231-12.
[7] 黄兵, 刘萍. 金属网格柔性透明导电薄膜研究进展[J]. 材料导报, 2023, 37(5): 21030214-12.
[8] 王达浩, 谢凤鸣, 魏怀鑫, 胡英元, 赵鑫. 双苯磺酰基苯类延迟荧光材料的合成及电致发光性质[J]. 材料导报, 2023, 37(4): 21060007-5.
[9] 卓明鹏, 俞燕君, 丁灵奕, 陈伟凡, 廖良生. 稀土发光配合物及其在有机发光二极管中的应用[J]. 材料导报, 2023, 37(3): 21060045-10.
[10] 陈昊翔, 李伟华. 自感知发光涂层在腐蚀监测中的研究进展[J]. 材料导报, 2023, 37(2): 21050151-10.
[11] 张婷婷, 高慧, 杨溢青, 洪兴枝, 任颖, 武海顺. 基于咔唑类给体分子的给-受体型热活化延迟荧光材料研究进展[J]. 材料导报, 2023, 37(16): 22060089-12.
[12] 李晨, 陈叶青, 全志鹏, 吴晓仪, 饶鹏鹏, 倪宗铭, 陈岩, 吴文海, 陈钊. 深蓝光发射碳点的改性及在电致发光器件中的应用[J]. 材料导报, 2023, 37(15): 22020030-6.
[13] 姚静锋, 李昊泽, 吴平, 谢凤鸣, 胡英元, 赵鑫. 具有分子间电荷转移效应的D-σ-A型热激活延迟荧光材料及其电致发光性能[J]. 材料导报, 2023, 37(14): 22010216-8.
[14] 简燕, 杨文静, 杨磊, 宋绍意, 倪婕, 何银芳. 纳米多孔硅的多片制备及其性能表征[J]. 材料导报, 2022, 36(Z1): 22010200-6.
[15] 孙思威, 金鑫, 邓昌宁, 郭乃胜, 余耀威. 基于分形理论的蓄能自发光道路标线涂料性能预测模型研究[J]. 材料导报, 2022, 36(Z1): 20110256-7.
[1] Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Reports, 2018, 32(3): 373 -377 .
[2] Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors[J]. Materials Reports, 2018, 32(3): 378 -383 .
[3] Congshuo ZHAO,Zhiguo XING,Haidou WANG,Guolu LI,Zhe LIU. Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix[J]. Materials Reports, 2018, 32(3): 418 -426 .
[4] Huaibin DONG,Changqing LI,Xiahui ZOU. Research Progress of Orientation and Alignment of Carbon Nanotubes in Polymer Implemented by Applying Electric Field[J]. Materials Reports, 2018, 32(3): 427 -433 .
[5] Xiaoyu ZHANG,Min XU,Shengzhu CAO. Research Progress on Interfacial Modification of Diamond/Copper Composites with High Thermal Conductivity[J]. Materials Reports, 2018, 32(3): 443 -452 .
[6] Anmin LI,Junzuo SHI,Mingkuan XIE. Research Progress on Mechanical Properties of High Entropy Alloys[J]. Materials Reports, 2018, 32(3): 461 -466 .
[7] Qingqing DING,Qian YU,Jixue LI,Ze ZHANG. Research Progresses of Rhenium Effect in Nickel Based Superalloys[J]. Materials Reports, 2018, 32(1): 110 -115 .
[8] Yaxiong GUO,Qibin LIU,Xiaojuan SHANG,Peng XU,Fang ZHOU. Structure and Phase Transition in CoCrFeNi-M High-entropy Alloys Systems[J]. Materials Reports, 2018, 32(1): 122 -127 .
[9] Changsai LIU,Yujiang WANG,Zhongqi SHENG,Shicheng WEI,Yi LIANG,Yuebin LI,Bo WANG. State-of-arts and Perspectives of Crankshaft Repair and Remanufacture[J]. Materials Reports, 2018, 32(1): 141 -148 .
[10] Xia WANG,Liping AN,Xiaotao ZHANG,Ximing WANG. Progress in Application of Porous Materials in VOCs Adsorption During Wood Drying[J]. Materials Reports, 2018, 32(1): 93 -101 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed