INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
Advances in Fabrication and Properties Research of h-BN Contained Ceramic Composites |
LI Yanjun1,2, LIU Donghua1, ZHANG Dian1, MA Yuzhao1
|
1 College of Materials and Mineral Resources, Xi’an University of Architecture and Technology, Xi’an 710049; 2 StateKey Laboratory of Advanced Refractories, Sinosteel Luoyang Institute of Refractories Research Co., Ltd., Luoyang 471039 |
|
|
Abstract Ceramic materials possess the advantages of low density, favorable corrosion resistance and abrasive resistance. Nevertheless, ceramics are pretty hard and brittle, which results in poor machinability and thermal shock resistance. h-BN presents low elastic modulus and hardness, its machinability and thermal shock resistance are excellent. Therefore, the machinability and thermal shock resistance of ceramics can be obviously improved by introducing h-BN into ceramics. The research on the materials system, fabrication routes, and properties of the h-BN contained ceramic composites have been attracting enormous attention. In this article, fabrication routs of h-BN contained ceramic composites are reviewed based on the introducing methods of h-BN. The effects of h-BN on the properties of h-BN contained ceramic composites, including mechanical properties, thermal shock resistance, machi-nability, wave transparent properties and tribology properties are summarized thoroughly. The existing problems on the fabrication and properties research of the h-BN contained ceramic composites are concluded, and the future research and development direction is proposed.
|
Published: 09 August 2018
|
|
|
|
1 Kusunose T, Sekino T, Choa Y H, et al. Fabrication and microstructure of silicon nitride/boron nitride nanocomposites[J].Journal of the American Ceramic Society,2002,85(11):2678. 2 Kusunose T, Sekino T, Choa Y H, et al. Machinability of silicon nitride/boron nitride nanocomposites[J].Journal of the American Ceramic Society,2002,85(11):2689. 3 Jiang T, Jin Z H, Qiao G J, et al. Fabtication and thermal shock resistance of the machinable BN/B4C composite ceramics[J].Journal of the Chinese Ceramic Society,2010,38(8):1527(in Chinese). 江涛,金志浩,乔冠军,等.可加工BN/B4C复相陶瓷的制备与其抗热震性能[J].硅酸盐学报,2010,38(8):1527. 4 Gao L, Jin X H, Li J G, et al. BN/Si3N4 nanocomposite with high strength and good machinability[J].Materials Science and Enginee-ring:A,2006,415(1-2):145. 5 Shuba R, Chen I W. Machinable α-SiAlON/BN composites[J].Journal of the American Ceramic Society,2006,89(7):2147. 6 Coblenz W S, Lewis D. In situ reaction of B2O3 with AlN and/or Si3N4 to form BN-toughened composites[J].Journal of the American Ceramic Society,1988,71(12):1080. 7 Zhang G J, Ohji T. In situ reaction synthesis of silicon carbide-boron nitride composites[J].Journal of the American Ceramic Society,2001,84(7):1475. 8 Zhang G J, Yang J F, Ando M, et al. Nonoxide-boron nitride composites: In situ synthesis, microstructure and properties[J].Journal of the European Ceramic Society,2002,22(14-15):2551. 9 Zhang G J, Ohji T. Microstructures and properties of in situ nono-xide-boron nitride (Nobn) composites[J].Key Engineering Mate-rials,2002,206-213:1037. 10 Zhang G J, Ohji T. Reactions and processing of in situ nonoxide-boron nitride (Nobn) composites[J].Key Engineering Materials,2002,206-213:239. 11 Zhang G J, Yang J F, Ohji T, et al. In-situ reaction synthesis of non-oxide boron nitride composites[J].Advanced Engineering Materials,2002,4(1-2):15. 12 Zhang G J, Ando M, Yang J F, et al. Reaction synthesis of high performance boron nitride-containing composites (BNCC)[J].Silicates Industriels,2004,69(5-6):153. 13 Zhong B, Zhao G L, Huang X X, et al. Microstructure and mechanical properties of ZTA/BN machinable ceramics fabricated by reactive hot pressing[J].Journal of the European Ceramic Society,2015,35(2):641. 14 Li Y S, Yin J, Wu H B, et al. Microstructure, thermal conductivity, and electrical properties of in situ pressureless densified SiC-BN composites[J].Journal of the American Ceramic Society,2015,98(3):879. 15 Wu W W, Xiao W L, Estili M, et al. Microstructure and mechanical properties of ZrB2-SiC-BN composites fabricated by reactive hot pressing and reactive spark plasma sintering[J].Scripta Materialia,2013,68(11):889. 16 Wu W W, Estili M, Nishimura T, et al. Machinable ZrB2-SiC-BN composites fabricated by reactive spark plasma sintering[J].Mate-rials Science and Engineering:A,2013,582:41. 17 Zheng Y T, Li H B, Zhou T. Microstructure and mechanical properties of h-BN-SiC ceramic composites prepared by in situ combustion synthesis[J].Materials Science and Engineering:A,2012,540:102. 18 Yang Z H, Jia D C, Zhou Y, et al. Thermal shock resistance of in situ formed SiC-BN composites[J].Materials Chemistry and Physics,2008,107(2-3):476. 19 Lutz E H, Swain M V. Fracture toughness and thermal shock beha-vior of silicon nitride-boron nitride ceramics[J].Journal of the Ame-rican Ceramic Society,1992,75(1):67. 20 Isomura K, Fukuda T, Ogasahara K, et al. Machinable Si3N4-BN composite ceramics with high thermal shock resistance, high erosion resistance[C]∥Unified International Technical Conference on Refractories (UNITECR). Anaheim, California, American Ceramic Society,1989:624. 21 Noviyanto A, Yoon D-H, Lee K, et al. Effect of hexagonal-BN on phase transformation of additive-free Si3N4/SiC nanocomposites prepared from amorphous precursor[J].Transactions of Nonferrous Metals Society of China,2013,23(2):420. 22 Cho W S, Lee J H, Cho M W, et al. Microstructure and mechanical properties of silicon nitride h-BN based machinable ceramics[J].Key Engineering Materials,2005,287:340. 23 Yoon Y S, Na S W, Lee J, et al. R-Curve behavior of Si3N4-BN composites[J].Journal of the American Ceramic Society,2004,87(7):1374. 24 Wang R G, Pan W, Jiang M N, et al. Investigation of the physical and mechanical properties of hot-pressed machinable Si3N4/h-BN composites and FGM[J].Materials Science and Engineering: B,2002,90(3):261. 25 Wang R G, Pan W, Chen J, et al. Fabrication and characterization of machinable Si3N4/h-BN functionally graded materials[J].Materials Research Bulletin,2002,37(7):1269. 26 Li Y L, Li R X, Zhang J X. Rapid preparation of strong machinable Si3N4-based composites[J].Journal of Beijing University of Techno-logy,2007,33(11):1218(in Chinese). 李永利,李瑞霞,张久兴.高性能Si3N4基可加工复合陶瓷的快速制备[J].北京工业大学学报,2007,33(11):1218. 27 Zhang K, Zhang Q, Wang P F, et al. Silicon nitride/boron nitride composite by combustion synthesis[J].Materials Science Forum,2007,561-565:531. 28 Zhang Q, Shen W P, Gu S Y. Fabrication of machinable silicon nitride/boron nitride composite ceramics[J].Journal of the Chinese Ceramic Society,2007,35(3):337(in Chinese). 张强,沈卫平,顾淑媛.可加工氮化硅/氮化硼复相陶瓷的制备[J].硅酸盐学报,2007,35(3):337. 29 Liu J X, Yuan B, Zhang G J, et al. Properties of porous Si3N4/BN composites fabricated by RBSN technique[J].International Journal of Applied Ceramic Technology,2009,7(4):536. 30 Li Y F, Liu P, Wang X D, et al. Interface structure and formation mechanism of BN/intergranular amorphous phase in pressureless sintered Si3N4/BN composites[J].Scripta Materialia,2010,63(2):185. 31 Dou J P, Liu X L, Ma J T, et al. Dielectric and mechanical properties of porous Si3N4-BN ceramic composites[J].Key Engineering Materials,2012,512-515:854. 32 Zhao D L, Zhang Y J, Gong H Y, et al. Effect of BN whiskers on dielectric and mechanical properties of BNw/Si3N4 composites[J].Materials Research Innovations,2011,15(3):226. 33 Wang S J, Jia D C, Yang Z H, et al. Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si3N4 composite ceramics prepared by gel casting[J].Ceramics Internatio-nal,2013,39(4):4231. 34 Zhuang Y L, Wang S J, Jia D C, et al. Fabrication of gel cast BN/Si3N4 composite ceramics from surface-coated BN powder[J].Materials Science and Engineering:A,2015,626:27. 35 Feng Y R, Gong H Y, Zhang Y J, et al. Effect of BN content on the mechanical and dielectric properties of porous BNp/Si3N4 ceramics[J].Ceramics International,2016,42(1):661. 36 Zhao Y J, Zhang Y J, Gong H Y, et al. Gas pressure sintering of BN/Si3N4 wave-transparent material with Y2O3-MgO nanopowders addition[J].Ceramics International,2014,40(8):13537. 37 Thévenot F, Doche C, Mongeot H, et al. Si3N4/BN composites obtained from aminoboranes as BN precursors and sintering aids[J].Journal of the European Ceramic Society,1997,17(15-16):1911. 38 Kusunose T, Choa Y H, Sekino T, et al. Mechanical properties of Si3N4/BN composites by chemical processing[J].Key Engineering Materials,1998,161-163:475. 39 Wang X D, Qiao G J, Jin Z H. Investigation of fabrication and pro-perties of machinable Si3N4/BN nanocomposite ceramics[J].Key Engineering Materials,2003,247:311. 40 Wang X D, Qiao G J, Jin Z H. Investigation of fabrication and pro-perties of machinable Si3N4/BN nanocompo-site ceramics[J].Rare Metal Materials and Engineering,2003,247(7):498(in Chinese). 王向东,乔冠军,金志浩.可加工Si3N4/BN复相陶瓷的制备及性能研究[J].稀有金属材料与工程,2003,32(7):498. 41 Liu K, Zhang C R, Xiao Y D, et al. Synthesis of Si3N4-BN compo-sites using borazine as the precursor[J].Materials Science and Engineering:A,2013,575:48. 42 Li B, Liu K, Zhang C R, et al. Fabrication and properties of borazine derived boron nitride bonded porous silicon aluminum oxynitride wave-transparent composite[J].Journal of the European Ceramic Society,2014,34(15):3591. 43 Liu K, Zhang C R, Li B, et al. Synthesis of porous silicon nitride-boron nitride composites by gel-casting and PIP[J].Journal of Materials Engineering and Performance,2014,23(8):2829. 44 Liu K, Zhang C R, Li B, et al. Effect of pyrolysis temperature on properties of porous Si3N4-BN composites fabricated via PIP route[J].Journal of Materials Engineering and Performance,2013,22(12):3684. 45 Li H W, Zhang Q, Jin Z H, et al. Effect of heat treatment in oxidizing atimophere on machinable SiC/h-BN composite ceramics[J].Journal of the Chinese Ceramic Society,2010,38(8):1503(in Chinese). 李红伟,张琴,金志浩,等.氧化气氛下热处理对SiC/h-BN复相可加工陶瓷性能的影响[J].硅酸盐学报,2010,38(8):1503. 46 Wang X D, Qiao G J, Jin Z H. Fabrication of machinable silicon carbide-boron nitride ceramic nanocomposites[J].Journal of the American Ceramic Society,2004,87(4):565. 47 Jin H Y, Xu H, Qiao G J, et al. Study of machinable silicon carbide-boron nitride ceramic composites[J].Materials Science and Enginee-ring:A,2008,483-484:214. 48 Takafumi K, Tohru S, Yoichi A. Synthesis of SiC/BN nanocompo-site powders by carbothermal reduction and nitridation of borosilicate glass, and the properties of their sintered composites[J].Nanotech-nology,2008,19(27):275603. 49 Li Y S, Yin J, Wu H B, et al. Enhanced electrical resistivity in SiC-BN composites with highly-active BN nanoparticles synthesized via chemical route[J].Journal of the European Ceramic Society,2015,35(5):1647. 50 Lewis D, Ingel R P, Mcdonoughs W J, et al. Microstructure and thermomechanical properties in alumina- and mullite-boron-nitride particulate ceramic-ceramic composites[J].Ceramic Engineering and Science Proceedings,1981,2(7-8):719. 51 Lewis D, Rice R W. Thermal shock fatigue of monolithic ceramics and ceramic-ceramic particulate composites[J].Ceramic Engineering and Science Proceedings,1981,2(7-8):712. 52 Shi Z Q, Wang J P, Qiao G J, et al. Machinability, deformation, and cracks behavior of pressureless-sintered Al2O3/h-BN compo-sites: Role of weak boundary phases[J].Journal of Materials Science,2009,44(6):1580. 53 Shi Z Q, Wang J P, Qiao G J, et al. Effects of weak boundary phases (WBP) on the microstructure and mechanical properties of pressureless sintered Al2O3/h-BN machinable composites[J].Materials Science and Engineering:A,2008,492(1-2):29. 54 Li Y L, Qiao G J, Jin Z H. Machinable Al2O3/BN composite cera-mics with strong mechanical properties[J].Materials Research Bulletin,2002,37(8):1401. 55 Li Y L, Qiao G J, Jin Z H. Study on fabrication and sintering of Al2O3 composite powder coated with nano-sized BN[J].Journal of the Chinese Ceramic Society,2002,30(4):491(in Chinese). 李永利,乔冠军,金志浩.纳米BN包覆的Al2O3复合粉的制备及其烧结性能研究[J].硅酸盐学报,2002,30(4):491. 56 Li Y L, Qiao G J, Jin Z H. Effect of additions on the properties of Al2O3/BN machinable ceramics[J].Rare Metal Materials and Engineering,2004,33(7):744(in Chinese). 李永利,乔冠军,金志浩.添加剂对Al2O3/BN可加工陶瓷性能的影响[J].稀有金属材料与工程,2004,33(7):744. 57 Liang F, Xue Z L, Zhao L, et al. Mechanical properties and thermal shock resistance of alumina/hexagonal boron nitride composite refractories[J].Metallurgical and Materials Transactions A,2015,46(9):4335. 58 Zhang X H, Zhang R B, Chen G Q, et al. Microstructure, mechanical properties and thermal shock resistance of hot-pressed ZrO2(3Y)-BN composites[J].Materials Science and Engineering: A,2008,497(1-2):195. 59 Li Y L, Zhang J X, Qiao G J, et al. Fabrication and properties of machinable 3Y-ZrO2/BN nanocomposites[J].Materials Science and Engineering: A,2005,397(1-2):35. 60 Zhao H Y, Wang W M, Fu Z Y, et al. Preparation and properties of alumium nitride-boron nitride composite ceramic[J].Journal of the Chinese Ceramic Society,2007,35(12):1595(in Chinese). 赵海洋,王为民,傅正义,等.氮化铝-氮化硼复合陶瓷的制备和性能[J].硅酸盐学报,2007,35(12):1595. 61 Qin M L, Qu X H, Duan B H, et al. Fabrication of high density AlN-BN composite ceramics by presureless sintering[J].Journal of Inorganic Materials,2005,20(1):245(in Chinese). 秦明礼,曲选辉,段柏华,等.无压烧结制备高致密度AlN-BN复合陶瓷[J].无机材料学报,2005,20(1):245. 62 Jin H Y, Wang W, Gao J Q, et al. Study of machinable AlN/BN ceramic composites[J].Materials Letters,2006,60(2):190. 63 Kusunose T, Sekino T, Ando Y. Contact damage of machinable aluminum nitride/boron nitride nanocomposites[J].Journal of the Ceramic Society of Japan,2008,116(1354):762. 64 Kusunose T, Sakayanagi N, Sekino T, et al. Fabrication and characterization of aluminum nitride/boron nitride nanocomposites by carbothermal reduction and nitridation of aluminum borate powders[J].Journal of Nanoscience and Nanotechnology,2008,8(11):5846. 65 Wilk A, Rutkowski P, Zientara D, et al. Aluminium oxynitride-he-xagonal boron nitride composites with anisotropic properties[J].Journal of the European Ceramic Society,2016,36:2087. 66 Duan X M, Wang M R, Jia D C, et al. Anisotropic mechanical pro-perties and fracture mechanisms of textured h-BN composite cera-mics[J].Materials Science and Engineering: A,2014,607:38. 67 Tong Q F, Zhou Y C, Zhang J, et al. Preparation and properties of machinable Si2N2O/BN composites[J].International Journal of Applied Ceramic Technology,2008,5(3):295. 68 Pei Y C, Li S Q, Yu C Q, et al. Fabrication and proerties of SiO2-BN-Si3N4 composites[J].Rare Metal Materials and Engineering,2009,38(S2):114(in Chinese). 裴雨辰,李淑琴,于长清,等.SiO2-BN-Si3N4系复相陶瓷制备及性能[J].稀有金属材料与工程,2009,38(S2):114. 69 Long N N, Bi J Q, Wang W L, et al. Mechanical properties and microstructure of porous BN-SiO2-Si3N4 composite ceramics[J].Ceramics International,2012,38(3):2381. 70 Zhang Z T, Li W C, Wang X D, et al. Synthesis and characterization of MgAlON-BN composites[J].International Journal of Materials Research,2007,98(1):64. 71 Zhang Z T, Teng L D, Li W C. Mechanical properties and microstructures of hot-pressed MgAlON-BN composites[J].Journal of the European Ceramic Society,2007,27(1):319. 72 Jiang T, Tian C C. Investigation of microstructure and thermal shock resistance of the B4C/BN composites fabricated by hot-pressing process[J].Key Engineering Materials,2012,512-515:748. 73 Smirnov K L. β-SiAlON-BN composites by infiltration-mediated SHS under high pressure of nitrogen gas[J].International Journal of Self-Propagating High-Temperature Synthesis,2016,25(1):17. 74 Neshpor I P, Mosina T V, Grigoriev O N, et al. The mechanical properties of Sialon-noron nitride composite ceramics[J].Powder Metallurgy and Metal Ceramics,2015,53(9-10):574. 75 Li Y J, Ge B Z, Wu Z H, et al. Effects of h-BN on mechanical pro-perties of reaction bonded β-SiAlON/h-BN composites[J].Journal of Alloys and Compounds,2017,703:180. 76 Li Y J, Yu H L, Shi Z Q, et al. Synthesis of β-SiAlON/h-BN nanocomposite by a precursor infiltration and pyrolysis (PIP) route[J].Materials Letters,2015,139:303. 77 Zhao D L, Zhang Y J, Gong H Y, et al. BN nanoparticles/Si3N4 wave-transparent composites with high strength and low dielectric constant[J].Journal of Nanomaterials,2011,2011:1. 78 Wei D Q, Meng Q C, Jia D C. Mechanical and tribological properties of hot-pressed h-BN/Si3N4 ceramic composites[J].Ceramics International,2006,32(5):549. 79 Joshi B, Fu Z Y, Niihara K, et al. Optical, mechanical and tribological properties of boronnitride dispersed silicon nitride ceramics[J].Korean Journal of Materials Research,2010,20(8):444. 80 Jin H. Fabrication and properties of silicon aluminum oxide/hexagonal boron nitride compositeceramics by pressureless sintering[D].Xi’an: Xi’an Jiaotong University,2016(in Chinese). 金汉.硅铝氧化物/六方氮化硼复相陶瓷的常压烧结制备及其性能研究[D].西安:西安交通大学,2016. |
|
|
|