ZnO纳米棒/多孔锌泡沫的制备及其压缩和抗菌性能

doi:10.11896/cldb.201904002

Abstract
Figure/Table
References
Related Citation (2)

Download:

Full Text ( PDF ) (4119KB)

Suppl. Info.
Export: BibTeX | EndNote (RIS)

Abstract Taking the commercial as-cast pure zinc ingot and NaCl particles as raw materials, porous Zn foam with the apparent density of 2.86 g/cm³ and porosity of 60% was fabricated by air pressure infiltration method(APIM). Scanning electron microscopy(SEM) observation illustrated that the interconnected pores were uniformly distributed in the porous Zn foam. After the porous Zn foam was treated in 200 g/L NaCl solution at 80 ℃ for 2 h, dense ZnO nano-rods were in-situ generated on the pore walls of the porous Zn foam, thus a ZnO nano-rods/porous Zn foam was obtained. The results of compressive tests indicated that there was no obvious drop in the mechanical properties of the ZnO nano-rods/porous Zn foam compared with the porous Zn foam. The results of antibacterial tests suggest that the ZnO nano-rods/porous Zn foam exhibited an excellent antibacterial activity.

Key words： porous Zn ZnO nano-rods compressive mechanical property antibacterial activity biomedical applications

Published: 11 March 2019

CLC number:	TG146.22
	R318.08

Fund:This work was financially supported by the Innovation Team Project of Hebei Province (180079), the Natural Science Foundation of Hebei Province (E2016202406).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHAO Lichen
	XIE Yu
	ZHANG Zhe
	WANG Tiebao
	WANG Xin
	CUI Chunxiang

Cite this article:

ZHAO Lichen,XIE Yu,ZHANG Zhe, et al. Fabrication of ZnO Nano-rods/Porous Zn Foam and Its Compressive and
Antibacterial Properties[J]. Materials Reports, 2019, 33(4): 577-581.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.201904002 OR http://www.mater-rep.com/EN/Y2019/V33/I4/577

Song G L. Corrosion Science,2007,49(4),1696.2 Staiger M P, Pietak A M, Huadmai J, et al. Biomaterials,2006,27(9),1728.3 Zhang S X, Zhang X N, Zhao C L, et al. Acta Biomaterialia,2010,6(2),626.4 Li Z J, Gu X N, Lou S Q, et al. Biomaterials,2008,29(10),1329.5 Vormann J. Molecular aspects of medicine,2003,24(1-3),27.6 Witte F, Kaese V, Haferkamp H, et al. Biomaterials,2005,26(17),3557.7 Tao H R, Zhang Y, He Y H, et al. Journal of Clinical Rehabilitative Tissue Engineering Research,2009(12),2232(in Chinese).陶海荣,张岩,何耀华,等.中国组织工程研究与临床康复,2009(12),2232.8 He Y H, Tao H R, Zhang Y, et al.. Chinese Science Bulletin,2008,53(16),1981(in Chinese).何耀华,陶海荣,张岩,等.科学通报,2008,53(16),1981.9 Liang J, Srinivasan P B, Blawert C, et al. Corrosion science,2009,51(10),2483.10 Gao J C, Wu S, Qiao L Y, et al. Transactions of Nonferrous Metals Society of China,2008,18(3),588.11 Song G, Atrens A, John D S, et al. Corrosion Science,1997,39(5),855.12 Song G, Atrens A, John D S, et al. Corrosion Science,1997,39(10-11),1981.13 Zhao H J, Zhang Y H, Kang Y L, et al. Special Casting & Nonferrous Alloys,2006,26(6),340(in Chinese).赵鸿金,张迎晖,康永林,等.特种铸造及有色合金,2006,26(6),340.14 Liu G Y, Hu J, Ding Z K, et al. Applied Surface Science,2011,257(6),2051.15 Vojtch D, Kubásek J, erák J, et al. Acta Biomaterialia,2011,7(9),3515.16 Zhang S, Zhang X, Zhao C, et al. Acta Biomaterialia,2010,6(2),626.17 Zhang E, Yin D, Xu L, et al. Materials Science and Engineering C,2009,29(3),987.18 Kubásek J, Vojtěch D, Jablonská E, et al. Materials Science & Enginee-ring C,2016,58,24.19 Qiao Y, Zhang W, Tian P, et al. Biomaterials,2014,35(25),6882.20 Liu X, Sun J, Yang Y, et al. Materials Letters,2015,161,53.21 Zhang Z, Gu B, Zhang W, et al. Applied Surface Science,2012,258(17),6504.22 Li H F, Xie X H, Zheng Y F, et al. Scientific Reports,2015,5,1.23 Li H, Yang H, Zheng Y, et al. Materials & Design,2015,83,95.24 Dambatta M S, Izman S, Kurniawan D, et al. Materials & Design,2015,85,431.25 Murni N S, Dambatta M S, Yeap S K, et al. Materials Science & Engineering C,2015,49,560.26 Liu X, Sun J, Qiu K, et al. Journal of alloys and compounds,2016,664,444.27 Hetrick E M, Schoenfisch M H. Chemical Society Reviews,2006,35(9),780.28 Guo Z J, Chen C, Gao Q, et al. Materials Letters,2014,137,464.29 Darouiche R O. New England Journal of Medicine,2004,350(14),1422.30 Muralisankar T, Bhavan P S, Gandhimathy S, et al. Malaya Journal of Biosciences,2014,1(3),196.31 Hu J, Zhong Z X, Zhang F, et al. Ceramics International,2015,41(5),7080.32 Sui M H, Zhang L D, Sheng L, et al. Science of the total environment,2013,452-453(5),148.33 Matai I, Sachdev A, Dubey P, et al. Colloids and surfaces B,2014,115,359.34 Ng Y H, Leung Y H, Liu F Z, et al. Thin Solid Films,2013,542(10),368.35 Zhao L C, Zhang Z, Song Y T, et al. Materials & Design,2016,108,136.36 Wu S L, Liu X M, Yeung K W K, et al. Materials Science and Enginee-ring R,2014,80(1),1.37 Karageorgiou V, Kaplan D. Biomaterials,2005,26(27),5474.38 Yoshida T, Komatsu D, Shimokawa N, et al. Thin Solid Films,2004,451-452,166.39 Sielmann C, Walus K, Stoeber B. Thin Solid Films,2015,592,76.40 Nobial M, Devos O, Tribollet B. Journal of Crystal Growth,2011,327(1),173.41 Li R J, Zhang X T, Dong H L,et al. Advanced Materials,2016,28,1697.42 Li P T, Wu Y Y, Liu X F. Materials Research Bulletin,2013,48,2044.43 Kumar R, Umar A, Kumar G, et al. Ceramics Internaltional,2017,43(5),3940.44 Król A, Pomastowski P, Rafińska K, et al. Advances in Colloid and Interface Science,2017,249,37.45 Song W H, Zhang J Y, Guo J, et al. Toxicology Letters,2010,199(3),389.46 Stoimenov P K, Klinger R L, Marchin G L, et al. Langmuir,2002,18(17),6679.47 Zhang L L, Jiang Y H, Ding Y L, et al. Journal of Nanoparticle Research,2007,9(3),479.