面向金属/树脂复合材料的纳米注塑成型技术综述

doi:10.11896/j.issn.1005-023X.2018.13.021

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2447KB)
Export: BibTeX | EndNote (RIS)

Abstract The large energy consumption and high cost in the fields of transportation and electronics industries have been triggering the urgent demand for lighter and stronger products. Especially in the field of electronics packaging, metal/polymer compo-sites have gradually prevailed over metallic or polymer materials due to their lightweight, easy processing and high strength. Metal/polymer composites consist of metal and polymer phases which combined with each other by interpenetrating interfaces. The chemical interaction and physical anchor effect endow with high bonding strength of the resultant composites. Despite of the interfaces between two phases, metal and polymer still exhibit their own intrinsic properties. How to achieve the strong bonding between metals and polymers is the biggest challenge to the fabrication of metal/polymer composites. Owing to the property disparity between metals and polymers, the processing techniques applicable for metal/polymer composites are quite different from either welding for metals or melt mixing for polymers. The development of an efficient and low-cost processing technique to obtain high-performance metal/polymer composites has hence become a hot topic in this field. The currently feasible routes to produce metal/polymer composites include lamination, laser bonding, friction stitch welding, friction stir welding, ultrasonic bonding and nano-molding. Among them, lamination can only be used to fabricate products with simple and large-size structure. Laser bonding, friction stitch welding and friction stir welding could induce scars to the surfaces of products. Ultrasonic bonding needs relatively complicated processing procedures. In comparison, nano-molding technology (NMT) can achieve the integrated fabrication of metal/polymer composites while mutually ensure the strong bonding between metal and polymer as well as the flexible design of products. Therefore, NMT has acquired extensive research interest as a predominant processing technique for fabricating metal/polymer composites. For the sake of manufacturing more favorable metal/polymer composites, there have been continuous endeavors to explore and improve the mechanism and process regime of NMT. By now, the basically recognized mechanism of NMT is: Ⅰ. The heat generated by exothermic reactions between amine compounds and polymers promotes the flow of polymer melt in nanostructures on the metal surface; Ⅱ. The solidification of polymers embedded in the metals forms the “anchors” at the polymer/metal interface, thereby significantly enhancing the composite’s bonding strength. The metals applicatory for NMT have been extended from aluminum alloy to copper, stainless steel, titanium and magnesium, also, the polymer species which can be adapted for NMT have proliferated to a range of resins such as PPS, PBT, PEEK, PPA and PA. This review gives summary descriptions over the bonding mechanism, manufacture processes, performance test, technological advances and applications with respect to NMT, as well as a prospective discussion on the future development trends and some unresolved key problems.

Key words： metal/polymer composite nano-molding technique (NMT) bonding mechanism manufacture process

Published: 01 August 2018

CLC number:

TB333

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Ying
	MEI Yuan
	WANG Ying
	MENG Fanbin
	ZHOU Zuowan

Cite this article:

LI Ying,MEI Yuan,WANG Ying, et al. The State-of-art of Nano-molding Technique Applying to the Production of Metal/Polymer Composites[J]. Materials Reports, 2018, 32(13): 2295-2303.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.13.021 OR http://www.mater-rep.com/EN/Y2018/V32/I13/2295

1 Cheng C P, Cheng C H, Chen Y C, et al. Ultrasonic dissimilar joi-ning of aluminum alloy and polymer with the composite material of ABS polymer doping carbonized rice husk[C]∥MATEC Web of Conferences. Japan,2017:06001.
2 张宾.金属树脂复合材料快速注塑模具制作工艺研究[J].科技展望,2016,26(7):65.
3 Yun L U, Fangjun W U, Xue G I, et al. Interfacial modification for an aluminum/epoxy resin laminated composite[J].Composite Interfaces,1994,2(4):265.
4 Botelho, Cocchierisilva E, Almeidapardini R, et al. A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures[J].Materials Research,2006,9(3):247.
5 Katayama S, Kawahito Y. Laser direct joining of metal and plastic[J].Scripta Materialia,2008,59(12):1247.
6 Liu F C, Liao J, Nakata K. Joining of metal to plastic using friction lap welding[J].Materials & Design,2014,54(54):236.
7 Takamasa Ozawa, Kazuyoshi Katoh, Masakatsu Maeda. Friction stir lap welding of thermoplastic resins to 3003 aluminum alloy[J].Journal of Japan Institute of Light Metals,2015,65(9):403.
8 Konchakova N, Balle F, Barth F J, et al. Finite element analysis of an inelastic interface in ultrasonic welded metal/fibre-reinforced polymer joints[J].Computational Materials Science,2010,50(1):184.
9 安藤直樹.NMT:アルミ合金に対する熱可塑性エンプラの射出接合技術[J].成形加工,2004,16(9):588.
10 Sasaki H, Kobayashi I, Sai S, et al. Direct adhesion of nylon resin to stainless steel plates coated with triazine thiol polymer by electropolymerization during injection-molding[J].Ko-bunshi Rombun Shu,1998,5(8):470.
11 佐々木,英幸,小林,等.トリアジンチオ-ル処理リン青銅板とポリブチレンテレフタレ-ト樹脂の射出成形による直接接着[J].Research Bulletin of the Iwate Industrial Research Institute,1998,5(8):77.
12 Liu B, Chen C Q, Zhang B J. The application of nano-moulding technology for metal and plastic’s integration[J].Die & Mould Industry,2015,41(7):1(in Chinese).
刘斌,陈昌乾,张步进.金属与塑料一体化的纳米成型技术及应用[J].模具工业,2015,41(7):1.
13 板橋雅巳.金属と樹脂の直接接合を可能にしたナノモールディングテクノロジー(NMT)[J].表面技術,2015,66(8):359.
14 板橋雅巳.NMT金属·樹脂接合技術の最新の展開(特集最新二次加工技術:接合·溶着·表面加飾)[J].プラスチックスエージ,2012,58(3):56.
15 安藤,直樹.アルミ合金に硬質樹脂を射出接合する技術「NMT」とその他金属に硬質樹脂を射出接合する技術「新NMT」(創立110周年記念活躍する材料-未来を拓く材料技術の最前線)[J].日本機械学會誌,2007,110:164.
16 安藤,直樹.金属と熱可塑性エンプラ樹脂での射出接合技術「NMT(Nano molding tech.)」および「新NMT」(特集樹脂と金属,樹脂とガラスなど「異なる材料どおしの」接着·接合技術)[J].Material Stage,2010,10(5):10.
17 黒岩剛毅.金属と樹脂の接合技術「NMT(Nano Molding Technology)」による金属代替成形品の可能性(特集2015年金型加工·樹脂成形技術の新潮流)-(部材軽量化に向けた樹脂成形技術)[J].型技術,2015,30(1):56.
18 He Y, Sun X, Ho H. New solutions for metal/plastic hybrid design via nano-molding technology[J/OL].SPE Plastics research online, http:∥www.4spepro.org/view.php?source=005957-2015-07-15.
19 安藤,直樹. ナノレベル凹凸をつくりこんだ金属とその利用法—アルミ合金に硬質樹脂を射出接合する「NMT」及びマグネシウム合金に硬質樹脂を射出接合する「新NMT」 (特集ナノテクノロジーの展開—材料[J].Plastics Age,2006,27(4):52.
20 Plastics—Evaluation of the adhesion interface performance in plastic-metal assemblies: ISO 19095:2015[S/OL].[2015-08].https:∥www.iso.org/search.html?q=19095.
21 冨永高広.金属－樹脂異種複合体の接合界面特性評価の ISO 規格化[J].成形加工:プラスチック成形加工学会誌,2016,28(3):107.
22 Ltd T P C. Bonding technology between metal and resin by injection molding (NMT)~technical summary, product samples and the technical possibilities~[J].Journal of the Society of Instrument & Control Engineers,2015,54(10):771.
23 田中刚,渡边康弘,锅仓利行.镁材与树脂零件的复合品及其制造方法:CN,104583462A[P].2012-07-30.
24 王长明.纳米成型技术的创新与应用[C]∥第二届纳米注塑以及金属手机外壳制程技术应用研讨会.昆山,2015.
25 蒋凯泉,汪永斌,陈建峰,等.应用于纳米注塑成型的高品质PBT基础树脂的制造方法:CN,106519196A[P].2017-10-27.
26 李东阵.一种用于纳米注塑的聚酯复合材料及其制备方法:CN,106009544A[P].2016-07-01.
27 陈彬,阳震.一种应用于NMT的树脂组合物:CN,106243668A[P].2016-08-10.
28 梁世杰.NMT+CNC工艺手机结构设计重点[C]∥纳米注塑以及竞争制程技术应用研讨会.深圳,2015:17.
29 Annerfors C O, Petersson S. Nano molding technology on cosmetic aluminum parts in mobile phones[D].Lund: Lund University,2007.
30 章晓,唐丽丽,程云,等.一种金属树脂复合体的制备方法及金属树脂复合体:CN,103448200A[P].2012-05-28.
31 Cao Y X, Lai H L, Qin Y. PBT engineering plastic composition used for NMT: WO,2016179770 A1[P].2015-05-11.
32 任项生.一种金属片、金属树脂复合体及其制备方法:CN,103993340 A[P].2014-05-20.
33 Naritomi M, Andoh N. Copper alloy composite and method for ma-nufacturing same: US,9017569[P].2015-04-28.
34 Andoh N. Nano molding technology: Aluminum alloy and hard resin integration technology by injection molding[J].Seikei-Kakou,2009,16(9):558.
35 Cao Y X, Lai H L, Deng D Y. PA (polyamide) resin composition used for NMT (nano molding technology) and having LDS (laser direct structuring) function: CN,105694447A[P].2016-03-09.