Other articles related with "TB333":
  LIU Tingting, TIAN Guoxing, ZHAO Xin, YU Xinyong, MAO Chao, YU Xuehan, CHEN Ling
  Synthesis of Ni-Co Hydroxide/Graphene Hydrogel Composites with Three-dimensional Network Structure and Their Electrochemical Performance
    Materials Reports   2024 Vol.38 (5): 22070064-7 [Abstract] (41) [PDF 26694 KB] (25)
  PAN Ling, XU Bingbing, REN Zhiying, SHI Linwei, CHEN Yipeng
  Static Mechanical Properties of Lightweight Corrugated Sandwich Structure Based on Metal Rubber
    Materials Reports   2024 Vol.38 (4): 22080228-6 [Abstract] (50) [PDF 18345 KB] (13)
  WANG Ximao, ZHAO Yuncai, GUO Weiling, MA Guozheng, WANG Huipeng, WANG Haidou
  Research Progress of Deposition Mechanism and Structure Performance Optimization of Cold Sprayed Copper-based Ceramic Composite Coatings
    Materials Reports   2023 Vol.37 (24): 22040223-10 [Abstract] (97) [PDF 35160 KB] (141)
  GUO Hui, FENG Jingjing, CHEN Yu, SUN Yabin, QIU Shuang
  Study on Compressive Mechanical Properties and Energy-absorption Characteristics of Polyurea-coated Foam Aluminum
    Materials Reports   2023 Vol.37 (23): 22120195-7 [Abstract] (91) [PDF 6875 KB] (25)
  LIU Feiyan, ZHAO Shengliang, LAI Xuandi, LU Zhiyang, LI Linfeng, HAN Peigang, CHEN Liqiong
  Rapid Detection of Hg2+ by a Ratiometric Fluorescence Sensing Method Based on Gold Nanoclusters and Carbon Quantum Dots
    Materials Reports   2023 Vol.37 (21): 22070224-8 [Abstract] (115) [PDF 13782 KB] (187)
  WANG Jianyang, MA Ying, LI Siyi, LI Tianwei, WANG Xiumei, WAN Ye, GAO Sitong, GUO Huilin, WEI Jie
  Preparation and Properties of Graphene/Porphyrin Composite Aerogels
    Materials Reports   2023 Vol.37 (16): 21080120-5 [Abstract] (186) [PDF 5452 KB] (308)
  LI Xiaolong, WANG Tan, ZUO Xiaoqing, DAI Biao, ZHOU Yun
  Effects of Liquid Network and Relative Density on Microstructure and Mechanical Properties of SiCp/2024 Composites
    Materials Reports   2023 Vol.37 (14): 21120017-6 [Abstract] (115) [PDF 9525 KB] (25)
  YU Yanfei, WANG Xuan, GAO Xin, NING Feng, ZHANG Haopeng, YUE Hongyan
  Review of Porous Materials Derived from Using the Directional Freeze-casting Technique and Their Applications
    Materials Reports   2023 Vol.37 (5): 21050074-11 [Abstract] (830) [PDF 73928 KB] (322)
  CAO Yida, LIU Chengbao, CHEN Feng, QIAN Junchao, XU Xiaojing, MENG Xianrong, CHEN Zhigang
  Preparation of CeO2/BiOI/g-C3N4 Composite and Its Photocatalytic Degradation Property for RhB Under Visible Light
    Materials Reports   2023 Vol.37 (3): 21070275-7 [Abstract] (255) [PDF 11716 KB] (68)
  TANG Fei, CAI Wenyu, CHEN Fei, ZHU Chen, LIU Chengbao, CHEN Zhigang
  Structural Design, Synthesis and Photocatalytic Applications of g-C3N4/Transition Metal Sulfide Composite Material
    Materials Reports   2023 Vol.37 (1): 20100135-9 [Abstract] (332) [PDF 10924 KB] (132)
  YANG Wenfei, ZHANG Zhongyuan, ZHANG Xue, WANG Yinong, GUO Xian'e, DONG Xinglong
  Synthesis and Electrochemical Lithium Storage Properties of Multicomponent Ni/NiO/rGO Nanocomposites
    Materials Reports   2022 Vol.36 (23): 21060194-8 [Abstract] (325) [PDF 15838 KB] (262)
  XIAO Yingjie, SHI Shaoqing, LIU Yingfeng, CHEN Shou, LIAO Yu
  Study on Anti-penetration Characteristics of Gunshot-impacted Polyurea Steel Plate Composite Layer
    Materials Reports   2022 Vol.36 (23): 22010187-7 [Abstract] (269) [PDF 26751 KB] (52)
  LI Yang, CAI Changchun, YU Huan, XU Zhifeng, WANG Zhenjun, ZHANG Yonggang, QIAN Xin, ZHONG Junjun
  Investigation on Microstructure and Tensile Properties of Domestic M50J Carbon Fiber/Aluminum Matrix Composites
    Materials Reports   2022 Vol.36 (21): 21030323-6 [Abstract] (408) [PDF 13315 KB] (262)
  LYU Yuanyuan, YUE Yun, DU Zhihao, DU Sanming, NI Feng, ZHANG Yongzhen
  Effect of Low-pressure Vacuum Nitriding Temperatures on Microstructure and Tribological Properties of Novel TiZr-based Alloy
    Materials Reports   2022 Vol.36 (17): 21060143-7 [Abstract] (267) [PDF 12197 KB] (233)
  WANG Qi, LI Ke, WU Yihua, ZHU Zhigang, SHIH Weiheng
  Water-Resistant CsPbBr3 Nanocrystal-Polymethylmethacrylate Composite Fibrous Membranes Prepared by Electrostatic Spinning
    Materials Reports   2022 Vol.36 (16): 21020035-5 [Abstract] (313) [PDF 13296 KB] (228)
  LIU Tong, ZHUGE Xiangqun, LAN Jiaxin, GENG Jiye, LUO Zhihong, LI Yibing, LUO Kun
  Study on the 3D Printing of Flexible Pressure Sensor by Using Polyurethane Pressure Sensitive Materials and Encapsulated GaInSn Liquid Metal Wires
    Materials Reports   2022 Vol.36 (15): 21030297-5 [Abstract] (349) [PDF 6176 KB] (724)
  JIAO Yuhong, ZHU Jianfeng, WANG Fen
  The Regulation of Interfacial Bonding in SiC/Al Matrix Composites
    Materials Reports   2022 Vol.36 (9): 20070174-13 [Abstract] (421) [PDF 5878 KB] (439)
  ZHENG Qiwen, FAN Tongxiang
  Experimental and Simulation Methods on Liquid/Solid Interface Wettability Considering Crystal Surfaces
    Materials Reports   2022 Vol.36 (9): 21010025-12 [Abstract] (510) [PDF 4787 KB] (543)
  LI Ge, HAN Bin, LI Meiyan, LIU Peng, LI Zhaohui
  Research Progress of Graphene Reinforced Metal-based Composite Coating
    Materials Reports   2022 Vol.36 (8): 20080127-7 [Abstract] (406) [PDF 5932 KB] (343)
  HU Chenwei, LI Bin, WU Yufeng, YANG Ming, ZHANG Shuhao, PAN Dean
  Status and Progress of Recycling Waste Organic-inorganic Composites by Pyrolysis
    Materials Reports   2021 Vol.35 (21): 21091-21098 [Abstract] (517) [PDF 3652 KB] (918)
  ZHOU Chuan, YANG Bo, YANG Guang, YANG Derui, YANG Xiaobing
  Progress on Zirconium-based Metal Organic Frameworks (Zr-MOFs) as Absorptive Materials for Gas Masks
    Materials Reports   2021 Vol.35 (5): 5140-5146 [Abstract] (543) [PDF 4391 KB] (306)
  LI Jian, ZUO Tingting, XUE Jiangli, RU Yadong, ZHAO Xingke, GAO Zhaoshun, HAN Li, XIAO Liye
  Optimization of Microstructure and Properties of CuCr/CNTs Composites by Hot-pressed Sintering and Rolling
    Materials Reports   2021 Vol.35 (2): 2078-2085 [Abstract] (532) [PDF 11679 KB] (189)
  WU Lei, PENG Ben, ZHOU Jun, LIU Changbo, YUE Changsheng, TIAN Wei, SONG Yonghui, JIANG Lei
  Advances on Carbon-based Non-noble Metal Electrocatalyst
    Materials Reports   2020 Vol.34 (23): 23009-23019 [Abstract] (724) [PDF 9410 KB] (225)
  WANG Hang, GUO Zi'ao, YI Denghao, FENG Yinghao, ZHANG Jingfang, LI Xiaofeng, LIU Bin, BAI Peikang
  Research Progress on Surface Coating of Metal/Ceramic Powder Suitable for 3D Printing
    Materials Reports   2020 Vol.34 (21): 21166-21171 [Abstract] (623) [PDF 4480 KB] (509)
  LIU Guimin, DU Linfei, YAN Tao, HUI Yang
  Study on In-situ Formation Mechanism of Cu-Al2O3 Composite Powder
    Materials Reports   2020 Vol.34 (8): 8031-8035 [Abstract] (392) [PDF 4454 KB] (202)
  YANG Yuming, LI Wei, LIU Ping, ZHANG Ke, MA Fengcang, LIU Xinkuan, CHEN Xiaohong, HE Daihua
  Microstructure and Mechanical Properties of SiC Doped Ni-P-PTFE Composite Coatings
    Materials Reports   2020 Vol.34 (4): 4153-4157 [Abstract] (510) [PDF 3247 KB] (235)
  CUI Yan, NI Haochen, CAO Leigang, YANG Yue, WANG Yiming
  Effect of SiC Particle Shaping on Mechanical Property of Aluminum Matrix Composite with High Volume Fraction Reinforcement and Finite Element Analysis
    Materials Reports   2019 Vol.33 (24): 4126-4130 [Abstract] (515) [PDF 3597 KB] (769)
  LI Dayu, ZHANG Wentao, ZHANG Chao
  Research Progress in Improving the Photocatalytic Properties of TiO2 Materialsby Doping with Different Metals
    Materials Reports   2019 Vol.33 (23): 3900-3907 [Abstract] (1252) [PDF 1551 KB] (979)
  LIU Weidong, BO Xusheng, HE Cheng
  Research on Low-speed Collision Performance of Anti-collision Beam Basedon Lightweight Material
    Materials Reports   2019 Vol.33 (Z2): 468-472 [Abstract] (232) [PDF 2104 KB] (410)
  CAO Leigang, WANG Xiaohe, CUI Yan, YANG Yue, LIU Yuan
  Effect of B4C Particle Size on the Microstructure and Mechanical Properties of High Volume Fraction Aluminum Matrix Composite Fabricated by Pressureless Infiltration
    Materials Reports   2019 Vol.33 (20): 3472-3476 [Abstract] (560) [PDF 2988 KB] (229)