表面脉冲电磁场处理下7A04铝合金凝固组织演变

doi:10.11896/j.issn.1005-023X.2018.12.015

Abstract
Figure/Table
References
Related Citation (8)

Download:

Full Text ( PDF ) (4309KB)
Export: BibTeX | EndNote (RIS)

Abstract A new technique termed surface electromagnetic pulse was developed for refining the solidification structure of the 7A04 super-hardness aluminum alloy. The effect of pulsed electromagnetic field on solidified microstructure, crystal orientation and cooling curves were investigated in order to explore the mechanism of microstructure evolution. The experimental results showed that the solidified structure was modified following rules of refining and spheroidization→coarsening and randomization with the increase of magnetic flux density, and a 40% reduction in grain size could be achieved when the increase of magnetic flux density was 241 mT. Magnetic rotation of crystals in size of 225 nm—100 μm could be controlled due to crystal magnetic anisotropy which caused by magnetic energy difference, forming the pulse magnetic preferred orientation. Meanwhile, a good result for grain refinement could also be obtained by the pulse electromagnetic inoculation treatment. It can be explained that the fraction of solid in the melt which was decreased by solidification initial temperature rise was benefit for particle motion.

Key words： grain refinement pulse electromagnetic field magnetic anisotropy magnetic energy fraction of solid

Published: 20 July 2018

CLC number:

TF821

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	BAI Qingwei
	MA Yonglin
	XING Shuqing
	FENG Yanfei
	BAO Xinyu
	CHEN Zhongyi

Cite this article:

BAI Qingwei,MA Yonglin,XING Shuqing, et al. Solidified Microstructure Evolution of 7A04 Alloy Under Surface Electromagnetic Pulse Treatment[J]. Materials Reports, 2018, 32(12): 2021-2027.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.12.015 OR http://www.mater-rep.com/EN/Y2018/V32/I12/2021

1 Zhang W, Wei G, Xiao X, et al. Experimental study on ballistic resistance property of 7A04 aluminum alloy against rod projectiles impact[J]. Chinese Journal of High Pressure Physics,2011,25(5):401.
2 Qi J, Wang J, Du H, et al. Heredity of aluminum melt by electric pulse modification (Ⅱ)[J]. Journal of Iron and Steel Research, International,2007,14(5):76.
3 Dobroň P, Chmelík F, Yi S, et al. Grain size effects on deformation twinning in an extruded magnesium alloy tested in compression[J]. Scripta Materialia,2011,65(5):424.
4 Jain A, Duygulu O, Brown D W, et al. Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet[J]. Materials Science & Engineering A,2008,486(1-2):545.
5 Ghaderi A, Barnett M R. Sensitivity of deformation twinning to grain size in titanium and magnesium[J]. Acta Materialia,2011,59(20):7824.
6 Li Nali. Research on influence of initial microstructure and deformation conditions on microstructure and texture evolution of hot-extruded AZ31 magnesium alloy[D]. Chongqing: Chongqing University,2013(in Chinese).
李娜丽.初始组织及变形条件对AZ31镁合金热挤压组织和织构演变的影响研究[D].重庆:重庆大学,2013.
7 Qian M, Ramirez A, Das A. Ultrasonic refinement of magnesium by cavitation: Clarifying the role of wall crystals[J]. Journal of Crystal Growth,2009,311(14):3708.
8 Nakada M, Shiohara Y, Flemings M C. Modification of solidification structures by pulse electric discharging[J]. ISIJ International,1990,30(1):27.
9 Spencer D B, Mehrabian R, Flemings M C. Rheological behavior of Sn-15 pct Pb in the crystallization range[J]. Metallurgical and Materials Transactions B,1972,3(7):1925.
10 Yin Z, Gong Y, Li B, et al. Refining of pure aluminum cast structure by surface pulsed magneto-oscillation[J]. Journal of Materials Processing Technology,2012,212(12):2629.
11 Zhang Y, Jie J, Chen H, et al. Effect of intermediate frequency electromagnetic field on the solidification structure and mechanical pro-perties of direct chill cast Al-8 wt.% Si alloy[J]. International Journal of Materials Research,2014,105(5):455.
12 Li Q, Song C, Li H, et al. Effect of pulsed magnetic field on microstructure of 1Cr18Ni9Ti austenitic stainless steel[J]. Materials Science & Engineering A,2007,466(1-2):101.
13 Fredriksson H, kerlind U. Materials processing during casting[M]. England: John Wiley & Sons, Ltd,2006.
14 Li Y J, Tao W Z, Yang Y S. Grain refinement of Al-Cu alloy in low voltage pulsed magnetic field[J]. Journal of Materials Processing Technology,2012,212(4):903.
15 Gong Y, Luo J, Jing J, et al. Structure refinement of pure aluminum by pulse magneto-oscillation[J]. Materials Science and Engineering A,2008,497(1-2):147.
16 Li J,Liu Y, Zhao X, et al. Effects of Al content on the lattice parameter and microstrain of α-Mg phase in Mg-Li alloys[J]. Applied Science and Technology,2011,38(12):55(in Chinese).
李吉庆,刘洋,赵新玲,等.Al含量对镁锂合金α-Mg相晶格常数及微观应变的影响[J].应用科技,2011,38(12):55.
17 Maniammal K, Madhu G, Biju V. X-ray diffraction line profile analysis of nanostructured nickel oxide: Shape factor and convolution of crystallite size and microstrain contributions[J]. Physica E: Low-dimensional Systems and Nanostructures,2017,85:214.
18 Wang J, Qi J, Du H, et al. Heredity of aluminum melt caused by electric pulse modification (Ⅰ)[J]. Journal of Iron and Steel Research, International,2007,14(4):75.
19 Tang Y, Wang J, Cang D. Electro-pulse on improving steel ingot solidification structure[J]. Journal of University of Science and Technology Beijing,1999,6(2):94.
20 Wang B, Yang Y, Zhou J, et al. Microstructure refinement of AZ91D alloy solidified with pulsed magnetic field[J]. Transactions of Nonferrous Metals Society of China,2008,18(3):536.
21 Joo H D, Kim S U, Koo Y M, et al. An effect of a strong magnetic field on the phase transformation in plain carbon steels[J]. Metallurgical and Materials Transactions A,2004,35(6):1663.
22 Dong X, Mi G, He L, et al. 3D simulation of plane induction electromagnetic pump for the supply of liquid Al-Si alloys during casting[J]. Journal of Materials Processing Technology,2013,213(8):1426.
23 Ferreira P J, Liu H B, Vander Sande J B. A model for the texture development of high-Tc superconductors under an elevated magnetic field[J]. Journal of Materials Research,1999,14(7):2751.
24 Sugiyama T, Tahashi M, Sassa K, et al. The control of crystal orientation in non-magnetic metals by imposition of a high magnetic field[J]. ISIJ International,2003,43(6):855.
25 Tang M, Xu J, Zhang Z, et al. New method of direct chill casting of Al-6Si-3Cu-Mg semisolid billet by annulus electromagnetic stirring[J]. Transactions of Nonferrous Metals Society of China,2010,20(9):1591.
26 Li H, Wang G, Zhao J, et al. Cluster structure and dynamics of liquid aluminum under cooling conditions[J]. Journal of Chemical Physics,2002,116(24):10809.
27 Cohen M L, Knight W D. The physics of metal clusters[J]. Physics Today,1990,43(12):42.
28 Li C, Ren Z, Ren W. Effect of magnetic fields on solid-melt phase transformation in pure bismuth[J]. Materials Letters,2009,63(2):269.
29 Brandes E A. Smithells metals reference book, sixth edition[M]. New York: Butterworth,1983.
30 Gündüz M, Hunt J D. Solid-liquid surface energy in the Al-Mg system[J]. Acta Metallurgica,1989,37(7):1839.