SnAgCu-<i>x</i>Bi/Cu焊点界面反应及微观组织演化

doi:10.11896/j.issn.1005-023X.2018.12.014

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (5648KB)
Export: BibTeX | EndNote (RIS)

Abstract This work chose Sn-3.0Ag-0.5Cu lead-free solder as experimental material, by adding different contents of Bi (0.1wt%, 0.5wt%,1.0wt%) into it. Through aging at different time, investigation was performed on the effect of Bi addition on the interface reaction of solder joints and microstructure evolution of intermetallic compounds. The results showed that the scallop-like Cu₆Sn₅ was formed at the interface of solder/Cu after soldering, a Cu₃Sn layer appeared between the Cu₆Sn₅ layer and the substrate after the aging treatment. Ag₃Sn particles were observed in the bulk solder and on the surface of Cu₆Sn₅ layer, and the number of Ag₃Sn particles increased with the aging time. After five days of aging, it was found that the Kirkendall void was formed within the Cu₃Sn layer and at the Cu₃Sn/Cu interface. Cracks were formed between the solder and Cu₆Sn₅ IMC layer in most samples due to the residual stress resulted from different thermal expansion coefficients of solder and Cu₆Sn₅ IMC. In the process of isothermal aging, the thickness of interfacial IMC layer increased linearly with the square root of aging time. The experimental results indicated that the addition of a small amounts of Bi elements would inhibit IMC layer growth comparing to the sample without Bi elements. When the content of Bi was 1.0%, its inhibitory effect was the most obvious. While the content of Bi was 0.5%, the inhibitory effect was the worst. The average diameter of the Cu₆Sn₅ grains increased linear with the cubic root of the aging time.

Key words： lead-free solder interface reaction solid-state aging intermetallic compound

Published: 20 July 2018

CLC number:

TG425.1

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	BAO Nifa
	HU Xiaowu
	XU Tao

Cite this article:

BAO Nifa,HU Xiaowu,XU Tao. Interfacial Reaction and Microstructure Evolution of SnAgCu-xBi/Cu Joints[J]. Materials Reports, 2018, 32(12): 2015-2020.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.12.014 OR http://www.mater-rep.com/EN/Y2018/V32/I12/2015

1 Li X P, Zhou M, Xia J, et al. Effect of thecross-interaction on the formation andevolution of intermetallic compounds in Cu(Ni)/Sn-Ag-Cu/Cu(Ni)BGA structure solder joints[J]. Acta Metallurgica Sinica,2011,47(5):611.
2 Shi Y W, Tian J, Hao H, et al. Effects of small amount addition of rare earth Er on microstructure and property of SnAgCu solder[J]. Journal of Alloys and Compounds,2008,453(1-2):180.
3 Ma H, Suhling J C. A review of mechanical properties of lead-free solders for electronic packaging[J]. Journal of Materials Science,2009,44(5):1158.
4 Lu H Y, Balkan H, Ng K Y S, et al. Effect of Ag content on the microstructure development of Sn-Ag-Cu interconnects[J]. Journal of Materials Science Materials in Electronics,2006,17(3):171.
5 Zhang Liang, Xue Songbai, Zeng Guang, et al. Interface reaction between SnAgCu/SnAgCuCe solders and Cu substrate subjected to thermal cycling and isothermal aging[J]. Journal of Alloys and Compounds,2012,510(1):38.
6 Abtew M, Selvaduray G. Lead-free solders in microelectronics[J]. Materials Science & Engineering R,2000,27(5):95.
7 Zhang Yanna, Zhu Xianzhong, Liu Gang, et al. Effects of Bi on microstructure and properties of Sn-3.0Ag-0.5Cu solder[J]. Hot Working Technology,2011,40(23):187(in Chinese).
张彦娜,朱宪忠,刘刚,等.Bi对Sn-3.0Ag-0.5Cu无铅焊料微观组织和性能的影响[J].热加工工艺,2011,40(23):187.
8 Rizvi M J, Chan Y C, Bailey C, et al. Effect of adding 1wt% Bi into the Sn-2.8Ag-0.5Cu solder alloy on the intermetallic formations with Cu-substrate during soldering and isothermal aging[J]. Journal of Alloys and Compounds,2006,407(1-2):208.
9 Hu Xiaowu, Yu Xiao, Li Yulong, et al. Research on IMC of Sn Bi Er/Cu in interfacial reaction and the aging[J]. Electro-nic Components and Materials,2014,33(4):25(in Chinese).
胡小武,余啸,李玉龙,等.SnBiEr/Cu界面反应及时效过程中IMC的研究[J].电子元件与材料,2014,33(4):25.
10 Tu K N, Thompson R D. Kinetics of interfacial reaction in bimetallic Cu-Sn thin films[J]. Acta Metallurgica,1982,30(5):947.
11 Wang Man, Yu Zhishui, Zhang Peilei, et al. The study on suppres-sing the formation of Kirkendall voids in Sn saesd/Cu solder joint[J]. Materials Review A: Review Papers,2015,29(12):148(in Chinese).
王曼,于治水,张培磊,等.Sn基钎料/Cu焊点Kirkendall空洞抑制研究[J].材料导报:综述篇,2015,29(12):148.
12 Chiu T C, Zeng K, Stierman R, et al. Effect of thermal aging on board level drop reliability for Pb-free BGA packages[C]// Electro-nic Components and Technology Conference. IEEE,2004: 1256.
13 Hu Jiaxiu. The microstructure and mechanical property of lead-free solder/copper single crystal interface[D]. Shenyang: Shenyang University of Technology,2007(in Chinese).
胡家秀.铜单晶体/无铅焊料的界面组织与性能[D].沈阳:沈阳工业大学,2007.
14 Hu X, Xu T, Jiang X, et al. Effects of post-reflow cooling rate and thermal aging on growth behavior of interfacial intermetallic compound between SAC305 solder and Cu substrate[[J]. Applied Phy-sics A,2016,122(4):1.
15 Kim D G, Jung S B. Interfacial reactions and growth kinetics for intermetallic compound layer between In-48Sn solder and bare Cu substrate[J]. Journal of Alloys and Compounds,2005,386(1-2):151.
16 Vianco P T, Rejent J A. Properties of ternary Sn-Ag-Bi solderalloy: Part 1—Thermal properties and microstructural analysis[J]. Journal of Electronic Materials,1999,28(10):1127.
17 Yu Daquan, Duan Lilei, Zhao Jie, et al. The growth behaviors of intermetallic compounds between Sn-3.5Ag and Cu substrate[J]. Materials Science＆Technology,2005,13(5):532(in Chinese).
于大全,段莉蕾,赵杰,等.Sn-3.5Ag/Cu界面金属间化合物的生长行为研究[J].材料科学与工艺,2005,13(5):532.
18 Kim H K, Tu K N. Kinetic analysis of the soldering reaction between eutectic SnPb alloy and Cu accompanied by ripening[J]. Phy-sical Review B Condensed Matter,1996,53(23):16027.
19 Gusak A M, Tu K N. Kinetic theory of flux-driven ripening[J]. Physical Review B,2002,66(11):115403.