电弧增材制造TC4钛合金宏观晶粒演化规律

doi:10.11896/j.issn.1005-023X.2018.12.016

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2219KB)
Export: BibTeX | EndNote (RIS)

Abstract As wire and arc additive manufacturing has been a hot area research among the many additive manufacturing met-hods, and TC4 is the most widely researched titanium alloy. Therefore the macrostructure evolution of the TC4 straight walls manufactured by WAAM was researched in this study. Firstly, the shape parameters of the double ellipsoidal heat source model were validated by single-track and single-layer experiments. The thermal field and thermal changing rate during the deposition process of the four straight walls were simulated using the modified model, and the evolution processes were analyzed by simulation results. The bottom of the straight wall are equiaxed grains and the upper part are columnar grains. The low welding current contributes to the formation of equiaxed grains, but the height of the equiaxed grain zone and the size of the equiaxed grains are independent of the line energy density.

Key words： wire and arc additive manufacturing TC4 titanium alloy numerical simulation macrostructure

Published: 20 July 2018

CLC number:

TG146

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Haiou
	WANG Jian
	WANG Chong
	WEI Lei
	ZHOU Yinghui
	LIN Xin

Cite this article:

YANG Haiou,WANG Jian,WANG Chong, et al. Macrostructure Evolution of TC4 Titanium Alloy Fabricated by Wire and Arc Additive Manufacturing[J]. Materials Reports, 2018, 32(12): 2028-2031.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.12.016 OR http://www.mater-rep.com/EN/Y2018/V32/I12/2028

1 Zhang Y M, Chen Y, Li P, et al. Weld deposition-based rapid prototyping: A preliminary study[J]. Journal of Materials Processing Technology,2003,135(2):347.
2 Zhang Y M, Chen Y, Li P, et al. Automated system for welding-based rapid prototyping[J]. Mechatronics,2002,12(1):37.
3 Wang H, Kovacevic R. Rapid prototyping based on variable polarity gas tungsten arc welding for a 5356 aluminium alloy[J]. Procee-dings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,2001,215(11):1519.
4 Spencer J D, Dickens P M, Wykes C M. Rapid prototyping of the metal parts by three-dimensional welding[J]. Processings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,1998,212(3):175.
5 Baufeld B, Biest O. Effect of deposition parameters on mechanical properties of shape metal deposition parts[J]. Processing of the Institution of the Mechanical Engineers, Part B: Journal of Enginee-ring Manufacture,2012,226(1):126.
6 Wu B, Pan Z, Ding D, et al. The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy[J]. Journal of Materials Processing Technology,2018,258:97.
7 Shen C, Pan Z, Cuiuri D, et al. Influences of deposition current and interpass temperature to the Fe₃Al-based iron aluminide fabricated using wire-arc additive manufacturing process[J]. International Journal of Advanced Manufacturing Technology,2016,88(5-8):1.
8 Ma Y, Cuiuri D, Hoye N, et al. The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding[J]. Materials Science & Engineering A,2015,631:230.
9 Ding D, Pan Z, Cuiuri D, et al. A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)[J]. Robotics & Computer-Integrated Manufacturing,2015,31:101.
10 Ding D, Pan Z, Cuiuri D, et al. Adaptive path planning for wire-feed additive manufacturing using medial axis transformation[J]. Journal of Cleaner Production,2016,133:942.
11 Wang J H. Research on shaped metal deposition of 2219 aluminum alloy by AC-TIG welding[D]. Harbin: Harbin Institute of Techno-logy,2015(in Chinese).
王计辉.2219铝合金交流TIG堆焊成型技术研究[D].哈尔滨:哈尔滨工业大学,2015.
12 Ding D P. A Study on welding robot based rapid prototyping system and the forming principles[D]. Wuhan: Huazhong University of Science and Technology,2005(in Chinese).
丁冬平.基于焊接机器人的熔焊成形系统及成形规律的研究[D].武汉:华中科技大学,2005.
13 Geng H, Xiong J, Huang D, et al. A prediction model of layer geometrical size in wire and arc additive manufacture using response surface methodology[J]. International Journal of Advanced Manufacturing Technology,2015,93:1.
14 Hu R H. Research on the planning of deposit trajectory for welding prototyping based on TIG building-up technology[D]. Nanchang: Nanchang University,2007(in Chinese).
胡瑢华.基于TIG堆焊技术的熔焊成型轨迹规划研究[D].南昌:南昌大学,2007.
15 Du N C. Study on metal rapid prototyping based on arc welding robot[D].Tianjin: Tianjin University,2009(in Chinese).
杜乃成.弧焊机器人金属快速成形研究[D].天津:天津大学,2009.
16 Wang F, Williams S, Colegrove P, et al. Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V[J]. Metallurgical and Materials Transactions A,2013,44(2):968.
17 Ding. Thermo-mechanical analysis of wire and arc additive manufacturing process[D].Bedfordshire: Cranfield University,2012.
18 Goldak J, Chakravarti A, Bibby M. A new finite element model for welding heat sources[J]. Metallurgical Transactions B,1984,15(2):299.
19 王煜,赵海燕,吴甦,等.高能束焊接双椭球热源模型参数的确定[J].焊接学报,2003,24(2):67.
20 Goldak J, Bibby M, Moore J, et al. Computer modeling of heat flow in welds[J]. Metallurgical Transactions B,1986,17(3):587.
21 张朝晖.ANSYS热分析教程与实例解析[M].北京:中国铁道出版社,2007:19.
22 Martina F. Investigation of methods to manipulate geometry, microstructure and mechanical properties in titanium large scale wire+arc additive manufacturing[D].Bedfordshire: Cranfield University,2014.