医用可降解镁基复合材料的研究现状及趋势

材料导报

2020, Vol. 34

Issue (Z2): 323-326

金属与金属基复合材料

医用可降解镁基复合材料的研究现状及趋势

贺龙朝^1,2, 荆磊², 余森², 徐云浩^1,2, 于振涛^2,3

1 东北大学材料科学与工程学院,沈阳 110819
2 西北有色金属研究院,陕西省医用金属材料重点实验室,西安 710016
3 暨南大学先进耐磨蚀及功能材料研究院,广州 511486

Research Status and Trend of Medical Degradable Magnesium Matrix Composites

HE Longchao^1,2, JING Lei², YU Sen², XU Yunhao^1,2, YU Zhentao^2,3

1 School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China
2 Northwest Institute of Nonferrous Metals, Shanxi Provincial Key Laboratory of Medical Metal Materials, Xi'an 710016, China
3 Institute of Advanced Abrasion Resistance and Functional Materials, Jinan University, Guangzhou 511486, China

摘要
参考文献
相关文章
推荐阅读
Metrics

下载:

全文 ( PDF ) ( 4521KB )
输出: BibTeX | EndNote (RIS)

摘要镁的弹性模量与骨接近,其可降解性可避免病患二次手术风险,但医用镁及镁合金仍存在力学性能较差、腐蚀降解速率过快等问题。通过向镁基体中添加增强相制备镁基复合材料,其腐蚀降解速率、力学性能及生物相容性均较镁基体有所优化。本文综述了医用镁基复合材料的最新研究现状,并归纳总结了医用可降解镁基复合材料研究中面临的部分难题,论述了医用可降解镁基复合材料未来可能的发展方向。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	贺龙朝
	荆磊
	余森
	徐云浩
	于振涛

关键词: 镁基复合材料腐蚀降解性力学性能生物相容性植入体

Abstract: The elastic modulus of magnesium is close to that of bone, and its biodegradability can avoid the risk of secondary surgery. However, Mg and Mg alloys still have some problems, such as poor mechanical properties and corrosion degradation. The corrosion degradation rate, mechanical properties and biocompatibility of magnesium matrix composites can be optimized by adding reinforcing phase to magnesium matrix. In this paper, some problems such as medical magnesium matrix composites,corrosion degradation rate and the future development direction of Mg are reviewed.

Key words: magnesium matrix composites corrosion degradability mechanical property biocompatibility implants

出版日期: 2020-11-25 发布日期: 2021-01-08

ZTFLH:

TG146.1

基金资助: 陕西省基金(2020ZDLGY13-05)

通讯作者: yzt@c-nin.com

作者简介: 贺龙朝,现为东北大学材料学院的硕士研究生,在于振涛教授的指导下进行研究,主要研究方向为可降解镁基复合材料在大塑性变形条件下的力学性能与腐蚀降解行为机理。于振涛,曾在西北有色金属研究院工作,兼任东北大学硕士研究生导师,现为暨南大学博士研究生导师,教授级高级工程师。主要研究合金设计、熔炼和加工、微观组织结构与性能等。参与国际、国家等40多个项目,申请专利80项。自1998年来发表200多篇高水平文章。最近开始研究新型生物医用合金材料及产品,是中国生物材料学会常务委员会委员。

引用本文:

贺龙朝, 荆磊, 余森, 徐云浩, 于振涛. 医用可降解镁基复合材料的研究现状及趋势[J]. 材料导报, 2020, 34(Z2): 323-326.
HE Longchao, JING Lei, YU Sen, XU Yunhao, YU Zhentao. Research Status and Trend of Medical Degradable Magnesium Matrix Composites. Materials Reports, 2020, 34(Z2): 323-326.

链接本文:

http://www.mater-rep.com/CN/ 或 http://www.mater-rep.com/CN/Y2020/V34/IZ2/323

1 Tahmasebifar A, Kayhan S M , Evis Z, et al. Journal of Alloys & Compounds, 2016, 687, 906
2 Rattier, Buddy D, Hoffman, et al. Elsevier Academic Press, 2005,1, 34.
3 Wu S, Liu X, Yeung K W, et al. Surface & Coatings Technology, 2013, 233, 13.
4 Kabir H, Munir K, Wen C, et al. Bioactive Materials, 2021, 6(3), 836.
5 Saris N L, Mervaala E, Karppanen H, et al. Clinica Chimica Acta, 2000, 294(12), 1.
6 Ali M, Hussein M A, Alaqeeli N, et al. Journal of Alloys and Compounds, 2019, 792, 1162.
7 Singh Raman R K, Jafari S, Harandi S E. Engineering Fracture Mechanics, 2015, 137, 97.
8 Pinto, Flávia Carmo Horta. Journal of Materials Science Materials in Medicine, 2012, 23(6), 1431.
9 Yang Y, Xiong X, Su J, et al. Journal of Alloys and Compounds, 2018, 750, 696.
10 Chen B, Lin D, Zeng X, et al. Journal of Materials Science, 2010, 45(9), 2510.
11 王敬丰, 高珊, 潘复生, 等.中国有色金属学报, 2009(5), 43.
12 Wang M, Wang S, Kang S, et al. Transactions of Nonferrous Metals Society of China, 2010, 20(2), 513.
13 姚怀, 文九巴, 熊毅, 等. 中国有色金属学报, 2018, 28(12), 2422.
14 杜辉, 李佳, 孙锐, 等. 特种铸造及有色合金, 2014, 34(5), 467.
15 Zhang Y, Li J, Li J. Journal of the Mechanical Behavior of Biomedical Materials, 2018, 80, 246.
16 Sevvel P, Jaiganesh V. Archives of Metallurgy & Materials, 2017, 62(3), 1779.
17 Lin J, Tong X, Shi Z, et al. Acta Biomaterialia, 2020, 106, 410.
18 Yin Z Z, Qi W C, Zeng R C, et al. Journal of Magnesium and Alloys, 2020, 8(1), 42.
19 Heinrich Nöth, Thomann M. European Journal of Inorganic Chemistry, 1995, 128(9), 923.
20 Jie D, Jianzhong C, Xiaoqing Z, et al. Materials Transactions, 2005, 46(1), 94.
21 Waizy H, Seitz J M, Reifenrath J, et al. Journal of Materials Science, 2013, 48(1), 39.
22 Chng C B, Lau D P, Choo J Q, et al. Acta Biomaterialia, 2012, 8(7), 2835.
23 Schinhammer M, Gerber I, Hanzi A C, et al. Materials Science & Engineering C Materials for Biological Applications, 2013, 33(2), 782.
24 Rahman M, Li Y, Wen C. Journal of Magnesium and Alloys, 2020, 8(3), 929.
25 Huan Z, Leeflang S, Zhou J, et al. Journal of the Mechanical Behavior of Biomedical Materials, 2011, 100B(2), 437.
26 袁广银, 张佳, 丁文江. 中国材料进展, 2011(2), 44.
27 Bommala V K, Krishna M G, Rao C T. Biomaterials, 2007, 28(13), 2163.
28 Ramu P, Kumar C V J, Palanikumar K. Materials Today: Proceedings, 2019, 16, 1287.
29 Jackson L E, Kariuki B M, Smith M, et al. Chemistry of Materials, 2005, 17(18), 4642.
30 Campo R D, Savoini B M, Monge A, et al. Journal of the Mechanical Behavior of Biomedical Materials, 2014, 39, 238.
31 Vanderhart D L, Feng Y , Han C C, et al. Macromolecules, 2000, 33(6), 2206.
32 Zhong X L, Wong W L E, Gupta M, et al. Acta Materialia, 2007, 55(18), 6338.
33 Witte F, Kaese V, Haferkamp H, et al. Biomaterials, 2005, 26(17), 3557.
34 Zhang S, Zhang X, Zhao C, et al. Acta Biomaterialia, 2010, 6(2), 626.
35 Onoki T, Yamamoto S, Onodera H, et al. Materials Science & Enginee-ring C, 2011, 31(2), 499.
36 Gu X, Zheng W, Cheng Y, et al. Acta Biomaterialia, 2009, 5(7), 2790.
37 Chen Y, Xu Z, Smith C. Acta Biomaterialia, 2014, 10(11),4561.
38 Lloyd A W. Medical Device Technology, 2002, 13(1), 18.
39 Hodgson S. Annals of The Royal College of Surgeons of England, 2009, 91(5), 448.
40 Feng A, Han Y. Materials & Design, 2011, 32(5), 2813.
41 Saremi M, Mohajernia S, Hejazi S. Materials Letters, 2014, 129, 111.
42 Lin J, Zhang D T, Zhang W, et al. Materials Science Forum, 2017, 898, 278.
43 Mark P Staiger, Alexis M Pietak, Jerawala Huadmai, et al. Biomaterials, 2006, 27(9), 1728.
44 Kirkland N T, Staiger M P, Nisbet D, et al. JOM the Journal of the Mi-nerals Metals & Materials Society, 2011, 63(6), 28.
45 Gu X N, Li N, Zhou W R, et al. Acta Biomaterialia, 2011, 7(4), 1880.
46 Huan Z G, Leeflang M A, Zhou J, et al. Materials Science & Engineering B, 2011, 176(20), 1644.
47 Feng A, Han Y. Journal of Alloys and Compounds, 2010, 504(2), 585.
48 Saremi M, Mohajernia S, Hejazi S, et al. Materials Letters, 2014, 129, 111.
49 Lin C, Han H, Zhang F, et al. Journal of Materials Science Materials in Medicine, 2008, 19(7), 2569.
50 Byalik O M, Donii O M, Kulinich A A, et al. Materials Science, 2004, 40(1),144.
51 Gray J E, Luan B. Cheminform, 2002, 336(1), 88.
52 He Y H, Zhang X N, Tao H N, et al. Chinese Science Bulletin, 2009, 54(3), 484.
53 Vyasaraj M, Gururaj P, Manoj G. Metals, 2016, 7(1), 2.
54 Agarwal S, Curtin J, Duffy B, et al. Materials Science and Engineering: C, 2016, 68(1), 948.
55 Gu X N, Zheng W, Cheng Y, et al. Acta Biomaterialia, 2009, 5(7), 2790.
56 尹自飞, 韩培, 王勇平, 等. 生物骨科材料与临床研究, 2011, 8(6), 1.
57 郭美卿, 范海南, 杨志强, 等. 材料导报, 2011,30(2), 12.
58 Yang J X, Jiao Y P , Yin Q S, et al. Frontiers of Materials Science in China, 2008, 2(2), 149.
59 Khalajabadi S Z, Ahmad N, Izman S, et al. Journal of Alloys & Compounds, 2017, 696, 768.

[1]	张鹏斐, 乔志军, 张志佳, 于镇洋, 赵潭, 苟金龙. 加入增韧材料提高TiO₂复合纳米电极的力学和电化学性能[J]. 材料导报, 2020, 34(Z2): 24-29.
[2]	王效军, 刘太奇. 碳纳米颗粒对碳纳米管复合材料电热-力学性能的影响[J]. 材料导报, 2020, 34(Z2): 63-66.
[3]	常洪雷, 陈繁育, 金祖权, 王广月, 刘健. 再生骨料混凝土在护岸工程应用的可行性[J]. 材料导报, 2020, 34(Z2): 206-211.
[4]	力乙鹏, 李婷. 土壤固化剂的固化机理与研究进展[J]. 材料导报, 2020, 34(Z2): 273-277.
[5]	郝文俊, 孙荣禄, 牛伟, 谭金花, 李小龙. 合金元素影响高熵合金涂层组织及力学性能综述[J]. 材料导报, 2020, 34(Z2): 330-333.
[6]	王力, 裴迪, 李新林, 裴志洋. 轧制ATZ331合金的显微组织与力学性能[J]. 材料导报, 2020, 34(Z2): 356-359.
[7]	王鸣, 张旭, 赵阳, 都亮, 程丽丽, 梁萌. 轧制延展率对IF钢箔力学性能的影响[J]. 材料导报, 2020, 34(Z2): 395-398.
[8]	雷达, 王海林, 周彪, 李贤, 包爽. 铝合金-低碳钢异种金属电阻点焊工艺研究[J]. 材料导报, 2020, 34(Z2): 465-468.
[9]	车会凌, 赵元轶, 冉雄雄, 董皓月, 匡颖, 高姗姗. 不同形貌的纳米二氧化硅制备方法及其对高分子复合材料力学性能的影响综述[J]. 材料导报, 2020, 34(Z2): 484-489.
[10]	黄爱宾, 刘彩凤, 张晓惠. 聚乳酸共混的研究进展[J]. 材料导报, 2020, 34(Z2): 586-589.
[11]	李沛欣, 袁凌, 潘磊, 刘伟超, 周文明, 任拓. MW级风电叶片用聚氨酯涂料的研究进展[J]. 材料导报, 2020, 34(Z2): 594-597.
[12]	张绍康, 王茹, 徐玲琳, 钟世云, 张国防, 王培铭. 羟乙基甲基纤维素改性水泥砂浆的物理力学性能和孔隙率[J]. 材料导报, 2020, 34(Z2): 607-611.
[13]	孙鹏飞, 黄舰, 吕平, 张锐, 方志强. 聚脲涂覆建筑结构抗爆性能研究进展[J]. 材料导报, 2020, 34(Z2): 623-630.
[14]	吕展衡, 陈品鸿, 许冰, 罗颖, 周武艺, 董先明. 巯基-双键点击反应制备光固化红光转光膜及其性能[J]. 材料导报, 2020, 34(Z1): 111-115.
[15]	王枭, 郭伟, 胡月阳, 陈芹, 仇佳琳, 李正阳, 陈佳彬, 管荣成. 硫硅酸钙的合成及水化性能的研究[J]. 材料导报, 2020, 34(Z1): 169-172.

[1]	Ninghui LIANG,Peng YANG,Xinrong LIU,Yang ZHONG,Zheqi GUO. A Study on Dynamic Compressive Mechanical Properties of Multi-size Polypropylene Fiber Concrete Under High Strain Rate[J]. Materials Reports, 2018, 32(2): 288 -294 .
[2]	WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing[J]. Materials Reports, 2017, 31(1): 64 -71 .
[3]	GUO Hongjian, JIA Junhong, ZHANG Zhenyu, LIANG Bunu, CHEN Wenyuan, LI Bo, WANG Jianyi. Microstructure and Tribological Properties of VN/Ag Films Fabricated by Pulsed Laser Deposition Technique[J]. Materials Reports, 2017, 31(2): 55 -59 .
[4]	WANG Wenjin, WANG Keqiang, YE Shenjie, MIAO Weijun, CHEN Zhongren. Effect of Asymmetric Block Copolymer of PI-b-PB on Phase Morphology and Properties of IR/BR Blends[J]. Materials Reports, 2017, 31(2): 96 -100 .
[5]	HUANG Dajian, MA Zonghong, MA Chenyang, WANG Xinwei. Preparation and Properties of Gelatin/Chitosan Composite Films Enhanced by Chitin Nanofiber[J]. Materials Reports, 2017, 31(8): 21 -24 .
[6]	YUAN Xinjian, LI Ci, WANG Haodong, LIANG Xuebo, ZENG Dingding, XIE Chaojie. Effects of Micro-alloying of Chromium and Vanadium on Microstructure and Mechanical Properties of High Carbon Steel[J]. Materials Reports, 2017, 31(8): 76 -81 .
[7]	ZHANG Le, ZHOU Tianyuan, CHEN Hao, YANG Hao, ZHANG Qitu, SONG Bo, WONG Chingping. Advances in Transparent Nd∶YAG Laser Ceramics[J]. Materials Reports, 2017, 31(13): 41 -50 .
[8]	YAN Zhilong, LI Yongsheng, HU Kai, ZHOU Xiaorong. Progress of Study on Phase Decomposition of Duplex Stainless Steel[J]. Materials Reports, 2017, 31(15): 75 -80 .
[9]	SHI Yu, ZHOU Xianglong, ZHU Ming, GU Yufen, FAN Ding. Effect of Filler Wires on Brazing Interface Microstructure and Mechanical Properties of Al/Cu Dissimilar Metals Welding-Brazing Joint[J]. Materials Reports, 2017, 31(10): 61 .
[10]	DONG Fei,YI Youping,HUANG Shiquan,ZHANG Yuxun,. TTT Curves and Quench Sensitivity of 2A14 Aluminum Alloy[J]. Materials Reports, 2017, 31(10): 77 -81 .

Viewed

Full text

Abstract

Cited

Shared

Discussed