Please wait a minute...
《材料导报》期刊社  2017, Vol. 31 Issue (3): 32-37    https://doi.org/10.11896/j.issn.1005-023X.2017.03.006
  材料综述 |
磁控溅射高温固体自润滑涂层的研究与进展*
陈亚军, 郁佳琪, 赵婕宇, 王付胜
中国民航大学中欧航空工程师学院,天津 300300;
Research and Development of High Temperature Solid Self-lubricanting Coating Prepared by Magnetron Sputtering
CHEN Yajun, YU Jiaqi, ZHAO Jieyu, WANG Fusheng
Sino-European Institute of Aviation Engineering, Civil Aviation University of China, Tianjin 300300;
下载:  全 文 ( PDF ) ( 1171KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 近年来,高温固体自润滑涂层在许多领域得到了快速发展,尤其是磁控溅射技术制备的微纳米高温固体自润滑涂层可以满足航空领域应用中对涂层厚度、力学性能、摩擦性能的更高要求。在综合国内外大量文献的基础上,对磁控溅射方法制备的高温固体自润滑涂层的材料体系、工艺参数优化和涂层结构设计取得的进展进行了综述,通过分析涂层组成相影响机理、工艺改进措施和涂层复杂界面结构,提出未来高温固体自润滑涂层有待进一步研究的问题。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
陈亚军
郁佳琪
赵婕宇
王付胜
关键词:  高温固体自润滑  磁控溅射  涂层结构    
Abstract: In recent years, high temperature solid self-lubricanting coating has been developed rapidly in many fields. Micro-nano scale high temperature solid self-lubricanting coating prepared by magnetron sputtering technology can meet the requirements of coating thickness, mechanical properties and friction performance for aeronautical applications. On the basis of consulting a large amount of references at home and abroad, progress of corresponding material systems, optimization of magnetron sputtering process parameters and coating structure design for the high temperature solid self-lubricating coating were reviewed. By analyzing the inf-luential mechanism of coating composition, process improvement measures and complex interface structure, the problem of further research of high temperature solid self lubricant coating was put forward.
Key words:  high temperature solid self-lubrication    magnetron sputtering    coating structure
出版日期:  2017-02-10      发布日期:  2018-05-02
ZTFLH:  TB31  
基金资助: *国家自然科学基金(51301198);中央高校基本科研业务费中国民航大学专项(ZXH2011C011)
作者简介:  陈亚军:男,1976年生,博士,副教授,研究方向为航空功能涂层制备及性能 E-mail:2292598008@qq.com
引用本文:    
陈亚军, 郁佳琪, 赵婕宇, 王付胜. 磁控溅射高温固体自润滑涂层的研究与进展*[J]. 《材料导报》期刊社, 2017, 31(3): 32-37.
CHEN Yajun, YU Jiaqi, ZHAO Jieyu, WANG Fusheng. Research and Development of High Temperature Solid Self-lubricanting Coating Prepared by Magnetron Sputtering. Materials Reports, 2017, 31(3): 32-37.
链接本文:  
https://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2017.03.006  或          https://www.mater-rep.com/CN/Y2017/V31/I3/32
1 Liu E Y, Jia J H, Gao Y M, et al. Progress of continuous Lubricating materials over a wide temperature range[J]. China Surf Eng,2015,28(4):1(in Chinese).
刘二勇,贾均红,高义民,等.宽温域连续润滑材料的研究进展[J].中国表面工程,2015,28(4):1.
2 Zeng Q F, Liu G, Dong G N, et al. Latest development of high-temperature tribological properties of diamond-like-carbon coatings[J]. Chin J Vac Sci Technol,2014,34(10):1024(in Chinese).
曾群锋,刘官,董光能,等.类金刚石碳膜高温摩擦学性能的研究进展[J].真空科学与技术学报,2014,34(10):1024.
3 Zhang T, Lan H, Huang C, et al. Preparation and characterizations of nickel-based composite coatings with self-lubricating property at elevated temperatures [J]. Surf Coat Technol,2016,294:21.
4 El-Rahman A M A. Synthesis and annealing effects on the properties of nanostructured Ti-Al-V-N coatings deposited by plasma enhanced magnetron sputtering [J]. Mater Chem Phys,2015,149-150:179.
5 Chang Y Y, Chiu W T, Hung J P. Mechanical properties and high temperature oxidation of CrAlSiN/TiVN hard coatings synthesized by cathodic arc evaporation[J]. Surf Coat Technol,2016,303:18.
6 Yuan J, Yamamoto K, Covelli D, et al. Tribo-films control in adaptive TiAlCrSiYN/TiAlCrN multilayer PVD coating by accelerating the initial machining conditions[J]. Surf Coat Technol,2016,294:54.
7 Liu E, Gao Y, Bai Y, et al. Tribological properties of self-lubricating NiAl/Mo-based composites containing AgVO3, nanowires[J]. Mater Charact,2014,97:116.
8 Ramazani M, Ashrafizadeh F, Mozaffarinia R. Optimization of composition in Ni(Al)-Cr2O3 based adaptivenanocomposite coatings[J]. J Therm Spray Technol,2014,23(6):962.
9 Chen J, An Y, Yang J, et al. Tribological properties of adaptive NiCrAlY-Ag-Mo coatings prepared by atmospheric plasma spraying[J]. Surf Coat Technol,2013,235:521.
10 Lu X L, Liu X B, Yu P C, et al. Synthesis and characterization of Ni60-hBN high temperature self-lubricating anti-wear composite coatings on Ti6Al4V alloy by laser cladding [J]. Biochem J,2016,78:87.
11 Zhang J C, Wu W D, Xu H, et al. The recent developments and applications of magnetron sputtering[J]. Mater Rev,2004,18(4):56(in Chinese).
张继成,吴卫东,许华,等.磁控溅射技术新进展及应用[J].材料导报,2004,18(4):56.
12 Komarov F F, Konstantinov V M, Kovalchuk A V, et al. The effect of steel substrate pre-hardening on structural, mechanical, and tribological properties of magnetron sputtered TiN and TiAlN coatings [J]. Wear,2016,352-353:92.
13 Yang Y H, Chen D J, Wu F B. Microstructure, hardness, and wear resistance of sputtering TaN coating by controlling RF input power[J]. Surf Coat Technol,2016,303:32.
14 Podgornik B, Sedlacˇek M, Mandrino D. Performance of CrN coa-tings under boundary lubrication [J]. Tribol Int,2016,96:247.
15 Zhao H, Yu L, Mu C, et al. Structure and properties of Si-implanted VN coatings prepared by RF magnetron sputtering[J]. Mater Charact,2016,117:65.
16 Huang J H, Chen Y H, Wang A N, et al. Evaluation of fracture toughness of ZrN hard coatings by internal energy induced cracking method [J]. Surf Coat Technol,2014,258:211.
17 Magnéli A. Structures of the ReO3-type with recurrent dislocations of atoms: ‘homologous series’ of molybdenum and tungsten oxides [J]. Acta Crystallographica,1953,6(6):495.
18 Woydt M, Skopp A, Dörfel I, et al. Wear engineering oxides/anti-wear oxides [J]. Tribol Trans,1998,218(1):84.
19 Bobzin K, Bagcivan N, Ewering M, et al. DC-MSIP/HPPMS (Cr,Al,V)N and (Cr,Al,W)N thin films for high-temperature friction reduction[J]. Surf Coat Technol,2011,205(8-9):2887.
20 Luo Q. Temperature dependent friction and wear of magnetron sputtered coating TiAlN/VN [J]. Wear,2011,271(9-10):2058.
21 Wang Y, Lee J W, Duh J G. Mechanical strengthening in self-lubricating CrAlN/VN multilayer coatings for improved high-temperature tribological characteristics [J]. Surf Coat Technol,2016,303:12.
22 He P F, Wang H D, Ma G Z, et al. Research progress of high-temperature tribological properties of silver-containing hard coatings[J]. Chin J Nonferrous Met,2015(11):2962(in Chinese).
何鹏飞,王海斗,马国政,等.含银硬质涂层高温摩擦学性能的研究进展[J].中国有色金属学报,2015(11):2962.
23 Qi D L, Lei H, Fan D, et al. Effect of Mo content on the microstructure and properties of CrMoN composite coatings[J]. Acta Metall Sin,2015(3):371(in Chinese).
齐东丽,雷浩,范迪,等.Mo含量对CrMoN复合涂层的组织结构和性能的影响[J].金属学报,2015(3):371.
24 Di Y, Zhang P, Cai Z, et al. Effect of Mo content on the structural and mechanical properties of CrMoN/MoS2 composite coatings[J]. Rare Met Mater Eng,2014,43(2):264.
25 Xu J H, Xue Y P, Cao J. Microstructures, mechanical and friction properties of TaMoN composite films[J]. Rare Met Mater Eng,2012(6):555(in Chinese).
许俊华,薛雅平,曹峻,等.TaMoN复合膜的微结构、力学性能与摩擦性能[J].稀有金属材料与工程,2012(6):555.
26 Yuan Z G, Yang J F, Wang X P, et al. Characterization and properties of quaternary Mo-Si-C-N coatings synthesized by magnetron sputtering technique[J]. Surf Coat Technol,2011,205(10):3307.
27 Zhang G, Fan T, Wang T, et al. Microstructure, mechanical and tribological behavior of MoNx/SiNx, multilayer coatings prepared by magnetron sputtering[J]. Appl Surf Sci,2013,274(2):231.
28 Kim J N, Park S, Kim T, et al. Structure and mechanical properties of Mo-N/Cu films produced by inductively coupled plasma reactive sputtering [J]. Thin Solid Films,2011,519:6876.
29 Aouadi S M, Paudel Y, Luster B, et al. Adaptive Mo2N/MoS2/Ag tribological nanocomposite coatings for aerospace applications [J]. Tribol Lett,2008,29(2):95.
30 Polcar T, Cavaleiro A. Structure, mechanical properties and tribology of W-N and W-O coatings [J]. Int J Refract Met Hard Mater,2010,28(1):15.
31 Gustavsson F, Jacobson S, et al. Ultra-low friction W-S-N solid lubricant coating [J]. Surf Coat Technol,2013,232(10):541.
32 Pimentel J V, Polcar T, Evaristo M, et al. Examination of the tribolayer formation of a self-lubricant W-S-C sputtered coating [J]. Tribol Int,2011,47:188.
33 Pimentel J V, Danek M, Polcar T, et al. Effect of rough surface patterning on the tribology of W-S-C-Cr self-lubricant coatings[J]. Tribol Int,2014,69(1):77.
34 Stone D S, Migas J, Martini A, et al. Adaptive NbN/Ag coatings for high temperature tribological applications [J]. Surf Coat Tech-nol,2012,206(19-20):4316.
35 Aouadi S M, Singh D P, Stone D S, et al. Adaptive VN/Ag nanocomposite coatings with lubricious behavior from 25 to 1 000 ℃[J]. Acta Mater,2010,58(16):5326.
36 Voevodin A A, Muratore C, Aouadi S M. Hard coatings with high temperature adaptive lubrication and contact thermal management: Review[J]. Surf Coat Technol,2014,257(50):247.
37 Muratore C, Bultman J E, Aouadi S M, et al. In situ Raman spectroscopy for examination of high temperature tribological processes [J]. Wear,2011,270(3-4):140.
38 Luster B, Stone D, Singh D P, et al. Textured VN coatings with Ag3VO4 solid lubricant reservoirs [J]. Surf Coat Technol,2011,206(7):1932.
39 Hsieh J H, Chiu C H, Li C, et al. Development of anti-wear and anti-bacteria TaN-(Ag, Cu) thin films-A review [J]. Surf Coat Technol,2013,233(11):159.
40 Stone D S, Harbin S, Mohseni H, et al. Lubricious silver tantalate films for extreme temperature applications [J]. Surf Coat Technol,2013,217:140.
41 Gao H, Stone D S, Mohseni H, et al. Mechanistic studies of high temperature friction reduction in silver tantalate[J]. Appl Phys Lett,2013,102(12):121603.
42 Hu J J, Muratore C, Voevodin A A. Silver diffusion and high-temperature lubrication mechanisms of YSZ-Ag-Mo based nanocomposite coatings [J]. Compos Sci Technol,2007,67(3-4):336.
43 Muratore C, Voevodin A A, Hu J J, et al. Multilayered YSZ-Ag-Mo/TiN adaptive tribological nanocomposite coatings[J]. Tribol Lett,2006,24(3):201.
44 Aouadi S M, Paudel Y, Simonson W J, et al. Tribological investigation of adaptive Mo2N/MoS2/Ag coatings with high sulfur content [J]. Surf Coat Technol,2009,203(10):1304.
45 Muratore C, Hu J J, Voevodin A A. Tribological coatings for lubrication over multiple thermal cycles [J]. Surf Coat Technol,2009,203(8):957.
46 Chen J G, Yin R J, Qiao X L, et al. The property and application of Ti-Al-N coatings [J]. Hot Work Technol,2001,1(2):50(in Chinese).
陈建国,尹瑞洁,乔学亮,等.Ti-Al-N薄膜的性能及应用[J]. 热加工工艺,2001,1(2):50.
47 Li Q, Qiu Y X, Zhao D L, et al. Silicon strengthened CrAIVN coa-tings [J]. J Iron Steel Res Int,2015,22(12):1118.
48 Ge F F, Zhu P, Meng F P, et al. Enhancing the wear resistance of magnetron sputtered VN coating by Si addition [J]. Wear,2016,354-355:32.
49 Fernandes F, Loureiro A, Polcar T, et al. The effect of increasing V content on the structure, mechanical properties and oxidation resis-tance of Ti-Si-V-N films deposited by DC reactive magnetron sputtering [J]. Appl Surf Sci,2014,289(2):114.
50 Zhou Z, Rainforth W M, Luo Q, et al. Wear and friction of TiAlN/VN coatings against Al2O3, in air at room and elevated temperatures[J]. Acta Mater,2010,58(8):2912.
51 Mitterer C, Fateh N, Munnik F. Microstructure-property relations of reactively magnetron sputtered VCxNy, films [J]. Surf Coat Technol,2011,205(13-14):3805.
52 Stone D S, Gao H, Chantharangsi C, et al. Load-dependent high temperature tribological properties of silver tantalate coatings [J]. Surf Coat Technol,2014,244:37.
53 Hovsepian P E, Ehiasarian A P, Petrov I. Structure evolution and properties of TiAlCN/VCN coatings deposited by reactive HIPIMS[J]. Surf Coat Technol,2014,257:38.
54 Grigore E, Ruset C, Luculescu C. The structure and properties of VN-VCN-VC coatings deposited by a high energy ion assisted magnetron sputtering method[J].Surf Coat Technol,2011,205(19):29.
55 Panjan M, Cˇekada M, Panjan P, et al. Dependence of microstructure and hardness of TiAlN/VN hard coatings on the type of substrate rotation [J]. Vacuum,2012,86(6):699.
56 Qiu Y X, Zhang S, Li B, et al. Influence of nitrogen partial pressure and substrate bias on the mechanical properties of VN coatings [J]. Procedia Eng,2012,36(6):217.
57 Tillmann W, Momeni S, Hoffmann F. A study of mechanical and tribological properties of self-lubricating TiAlVN coatings at elevated temperatures [J]. Tribol Int,2013,66(7):324.
58 Wang E Q, Li M L, Zhu P, et al. Influence of deposition temperature on microstructures and mechanical properties of magnetron sputtered V-Al-Si-N Coatings [J]. Chin J Vac Sci Technol,2015,35(8):1005(in Chinese).
王恩青,李淼磊,朱萍,等.沉积温度对磁控溅射制备V-Al-Si-N硬质涂层结构及性能的影响[J].真空科学与技术学报,2015,35(8):1005.
59 Du H J, Tian Y J. Hardening mechanism for nano-multilayer films [J]. J Inorg Mater,2006,21(4):769(in Chinese).
杜会静,田永君.超硬纳米多层膜致硬机理研究[J]. 无机材料学报,2006,21(4):769.
60 Zhang S S, Wang J B, Su Y Y. Current research status of nano-multilayer film [J]. Mater Rev: Rev,2014,28(11):147(in Chinese).
张山山,王锦标,苏永要.纳米多层膜的研究现状[J]. 材料导报:综述篇,2014,28(21):147.
61 Franz R, Mitterer C. Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: A review [J]. Surf Coat Technol,2013,228(9):1.
62 Qiu Y X. Research of Cr-N series self-lubricating hard coatings [D]. Beijing: General Iron Steel Res Institute,2013(in Chinese).
仇越秀.Cr-V体系自润滑硬质涂层之研究[D].北京:钢铁研究总院,2013.
63 Fernandes F, Polcar T, Cavaleiro A. Tribological properties of self-lubricating TiSiVN coatings at room temperature [J]. Surf Coat Technol,2014,267:8.
64 Knotek O, Jungblut J, Löffler F. on magnetron sputtered gradient and multilayer coatings [M]. Netherlands: Springer,1990.
65 Qiu Y X, Zhang S, Lee J W, et al. Towards hard yet self-lubricious CrAlSiN coatings [J]. J Alloys Compd,2015,618:132.
66 Kong M, Dong Y S, Dai J W, et al. The coherent growth and super hardness effect of VN/ (Ti, Al) N nano-multilayers[J]. J Shanghai Jiaotong University,2006,40(10):1758(in Chinese).
孔明,董云杉,戴嘉维,等.VN/(Ti,Al)N纳米多层膜的共格生长与超硬效应[J].上海交通大学学报,2006,40(10):1758.
67 Zhang X H, Cao M, Yang J, et al. Modulation period and nano TaN/VN multilayers[J]. Chin J Vac Sci Technol,2007,27(5):367(in Chinese).
张学华,曹猛,杨瑾,等.调制周期对TaN/VN纳米多层膜的影响[J].真空科学与技术学报,2007,27(5):367.
68 Ju H B, Yu L H, Xu J H. Synthesis and characterization of TiAlSiN/Mo2N multilayered thin films [J]. Chin J Vac Sci Technol,2014,34(6):620(in Chinese).
鞠洪博,喻利花,许俊华.不同调制周期TiAlSiN/Mo2N多层膜的微观结构、力学和摩擦性能研究[J].真空科学与技术学报,2014,34(6):620.
69 Lu Y H, Ji L, Liu L, et al. Influence of modulation periodicities on structure and corrosion properties of CrAl/CrAlN multilayer films [J]. Chin Surf Eng,2013,26(5):18(in Chinese).
吕艳红,吉利,刘流,等.调制周期对CrAl/CrAlN多层薄膜结构及耐腐蚀性能的影响[J].中国表面工程,2013,26(5):18.
70 Muratore C, Hu J J, et al. Adaptive nanocomposite coa-tings with a titanium nitride diffusion barrier mask for high-temperature tribolo-gical applications[J]. Thin Solid Films,2006,515(7-8):3638.
[1] 李迎春, 杨更生, 杨明宣, 邱明, 范恒华. 调制周期对磁控溅射Cr/类石墨碳多层膜腐蚀-磨损性能的影响[J]. 材料导报, 2024, 38(21): 23070129-7.
[2] 乔礼红, 游才印, 付花睿, 田娜, 白洋, 刘小鱼. 不同界面次序CoFeMnSi多层膜的磁各向异性[J]. 材料导报, 2024, 38(18): 23040015-6.
[3] 程培雪, 马迅, 刘平, 王静静, 马凤仓, 张柯, 陈小红, 刘剑楠, 李伟. 磁控溅射纳米银含量对钛种植体抗菌性的影响[J]. 材料导报, 2023, 37(16): 22030032-6.
[4] 马新国, 程正旺, 王妹, 贺晶, 邹维, 邓水全. 适用声波谐振器的磁控溅射制备AlN薄膜优化技术[J]. 材料导报, 2023, 37(11): 21080275-7.
[5] 刘伟, 贾琨, 谷建宇, 马晨, 魏学红. Ag/石墨烯复合薄膜的制备及其导热和电磁屏蔽性能研究[J]. 材料导报, 2022, 36(9): 21020136-5.
[6] 李彤, 赵卓, 武俊生, 方方, 周艳文. 粉末靶磁控溅射ZnO/Cu/ZnO的制备及表征[J]. 材料导报, 2022, 36(6): 20120259-4.
[7] 王付胜, 王汉森, 何鹏, 胡隆伟, 陈亚军. 磁控溅射和电镀方法制备纯银镀层耐蚀性能分析[J]. 材料导报, 2022, 36(6): 20120254-6.
[8] 张亚南, 周子超, 张豪, 肖宇琦, 邓娜, 付彬芸, 多树旺. 工艺参数对等离子增强磁控溅射TiAlN涂层微观结构及性能的影响[J]. 材料导报, 2022, 36(24): 21010184-6.
[9] 倪嘉, 史昆, 薛松海, 赵军, 刘时兵, 刘鸿羽, 李重阳. 航空发动机用热障涂层陶瓷材料的发展现状及展望[J]. 材料导报, 2021, 35(Z1): 163-168.
[10] 刘炘城, 邵海成, 乔冠军, 陆浩杰, 于刘旭, 张相召, 刘桂武. 氧化铝陶瓷表面连续导电金膜的制备工艺及性能[J]. 材料导报, 2021, 35(8): 8076-8081.
[11] 郦其乐, 杨勇, 魏玉全, 刘盟, 周洪军, 霍同林, 黄政仁. 不同B/C摩尔比碳化硼薄膜的光学性能[J]. 材料导报, 2021, 35(2): 2006-2011.
[12] 余登德, 张仁耀, 沈月, 闻明, 刘洪喜1,. 混合表面纳米化制备钛表面Ru/Ti薄膜的结构及耐蚀性能[J]. 材料导报, 2020, 34(24): 24086-24091.
[13] 吴珊妮, 赵远, 姜宏, 文峰, 熊春荣. 具有优良隔热和力学性能的低热导率W/Al2O3纳米多层功能膜的构建[J]. 材料导报, 2020, 34(2): 2023-2028.
[14] 汪国军, 白煜, 胡少杰, 张敏, 王书蓓, 万飞. 退火工艺对磁控溅射生长的Pt薄膜微观结构及电性能的影响[J]. 材料导报, 2019, 33(Z2): 56-60.
[15] 赵笑昆, 李博研, 张增光. 磁控溅射沉积制备Al掺杂ZnO薄膜的棒状晶粒生长[J]. 材料导报, 2019, 33(z1): 112-115.
[1] Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Reports, 2018, 32(3): 373 -377 .
[2] Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors[J]. Materials Reports, 2018, 32(3): 378 -383 .
[3] Congshuo ZHAO,Zhiguo XING,Haidou WANG,Guolu LI,Zhe LIU. Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix[J]. Materials Reports, 2018, 32(3): 418 -426 .
[4] Huaibin DONG,Changqing LI,Xiahui ZOU. Research Progress of Orientation and Alignment of Carbon Nanotubes in Polymer Implemented by Applying Electric Field[J]. Materials Reports, 2018, 32(3): 427 -433 .
[5] Xiaoyu ZHANG,Min XU,Shengzhu CAO. Research Progress on Interfacial Modification of Diamond/Copper Composites with High Thermal Conductivity[J]. Materials Reports, 2018, 32(3): 443 -452 .
[6] Anmin LI,Junzuo SHI,Mingkuan XIE. Research Progress on Mechanical Properties of High Entropy Alloys[J]. Materials Reports, 2018, 32(3): 461 -466 .
[7] Qingqing DING,Qian YU,Jixue LI,Ze ZHANG. Research Progresses of Rhenium Effect in Nickel Based Superalloys[J]. Materials Reports, 2018, 32(1): 110 -115 .
[8] Yaxiong GUO,Qibin LIU,Xiaojuan SHANG,Peng XU,Fang ZHOU. Structure and Phase Transition in CoCrFeNi-M High-entropy Alloys Systems[J]. Materials Reports, 2018, 32(1): 122 -127 .
[9] Changsai LIU,Yujiang WANG,Zhongqi SHENG,Shicheng WEI,Yi LIANG,Yuebin LI,Bo WANG. State-of-arts and Perspectives of Crankshaft Repair and Remanufacture[J]. Materials Reports, 2018, 32(1): 141 -148 .
[10] Xia WANG,Liping AN,Xiaotao ZHANG,Ximing WANG. Progress in Application of Porous Materials in VOCs Adsorption During Wood Drying[J]. Materials Reports, 2018, 32(1): 93 -101 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed