Please wait a minute...
《材料导报》期刊社  2017, Vol. 31 Issue (6): 56-60    https://doi.org/10.11896/j.issn.1005-023X.2017.06.012
  材料研究 |
NBR/PVC橡塑合金辐射防护材料的制备及性能研究
蒋丹枫, 王国辉, 李婷婷, 何帆, 戴耀东
南京航空航天大学材料科学与技术学院, 南京 210016
Preparation and Performance of NBR/PVC Blend Rubber-Plastic Alloy
Used for Radiation Shielding
JIANG Danfeng, WANG Guohui, LI Tingting, HE Fang, DAI Yaodong
College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016
下载:  全 文 ( PDF ) ( 1340KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 为了满足辐射防护的要求以及发展结构功能一体化柔性防护材料的需求,研制了一种新型的橡塑合金复合防护材料。通过力学性能和屏蔽性能测试发现,该复合材料具有较高的拉伸强度与断裂伸长率,且材料的中子与伽马屏蔽性能良好,随着功能填料含量的不断增加,中子和伽马屏蔽性能也不断提升,但材料的拉伸强度和断裂伸长率不断减小。辐照实验显示,电子束硫化后的样品比硫磺硫化后的样品拥有更出色的力学性能。综合考虑该材料良好的中子与伽马屏蔽性能、拉伸性能与柔韧性能等特性,其在形状较为复杂的核动力设施以及辐射防护服等领域具有较大的应用潜力。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
蒋丹枫
王国辉
李婷婷
何帆
戴耀东
关键词:  橡塑合金  辐射防护  中子与伽马屏蔽  拉伸强度  断裂伸长率    
Abstract: To satisfy the requirements for radiation protection and the development of structure-function integration of flexible shielding materials,a new type NBR/PVC blend shielding composite was prepared. The results of tensile tests and neutron and gamma-ray shielding experiments of the composite show that the composite has high tensile strength and elongation at break,and the neutron and gamma-ray shielding performance of the composite retains a high level. With the increase of functional filler content,the neutron and gamma-ray shielding performance increases,but the tensile strength and elongation at break decrease at the same time. The irradiation test shows that mechanical properties of electron beam cured specimen are better than that of sulfur cured specimen. Ta-king into account the excellent neutron and gamma-ray shielding performance,tensile property and flexibility of the composite,it has far reaching application potential in nuclear equipment in complex shapes and radiation shielding clothing.
Key words:  rubber-plastic alloy    radiation protection    neutron and gamma-ray shielding    tensile strength    elongation at break
出版日期:  2017-03-25      发布日期:  2018-05-02
ZTFLH:  X34  
  X946  
基金资助: 江苏省环保科研课题 (2015066);江苏高校优势学科建设工程资助项目
通讯作者:  戴耀东:男,1964年生,教授,博士研究生导师,主要从事放射性废水处理和辐射屏蔽材料研究,E-mail:yd_dai@126.com   
作者简介:  蒋丹枫:男,1989年生,硕士研究生,主要从事辐射屏蔽材料的研究,E-mail:gutian366208@hotmail.com
引用本文:    
蒋丹枫, 王国辉, 李婷婷, 何帆, 戴耀东. NBR/PVC橡塑合金辐射防护材料的制备及性能研究[J]. 《材料导报》期刊社, 2017, 31(6): 56-60.
JIANG Danfeng, WANG Guohui, LI Tingting, HE Fang, DAI Yaodong. Preparation and Performance of NBR/PVC Blend Rubber-Plastic Alloy
Used for Radiation Shielding. Materials Reports, 2017, 31(6): 56-60.
链接本文:  
https://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2017.06.012  或          https://www.mater-rep.com/CN/Y2017/V31/I6/56
1 Wang Jian,Zou Shuliang. Comparative study of tungsten and lead as gamma ray shielding material[J]. J University of South China:Sci Technol,2011,25(4):19(in Chinese).
王建,邹树梁. 钨和铅作为γ射线屏蔽材料的性能对比研究[J]. 南华大学学报:自然科学版,2011,25(4):19.
2 Wang Peng,Tang Xiaobing,Chen Feida,et al. Mechanical perfor-mance optimization of neutron shielding material based on short carbon fiber reinforced B4C/epoxy resin[J]. Nuclear Techniques,2013,36(1):33(in Chinese).
王鹏,汤晓斌,陈飞达,等. 短切碳纤维增强B4C/环氧树脂基中子屏蔽材料的力学性能优化研究[J]. 核技术,2013,36(1):33.
3 Soylu H M,Lambrecht F Y,Ersoz O A. Gamma radiation shielding efficiency of a new lead-free composite material[J]. J Radioanal Nuclear Chem,2015,305(2):529.
4 Waly E A,Bourham M A. Comparative study of different concrete composition as gamma-ray shielding materials[J]. Annals Nuclear Energy,2015,39(2):306.
5 Li Shulin,Dai Yaodong,Li Jun,et al. Synthesis and radiation shielding property of Sm(MAA)3/Pb(MAA)2/PMMA Composite[J]. Mater Rev:Res,2014,28(1):60(in Chinese).
李书林,戴耀东,李俊,等. 含铅/钐功能粒子有机玻璃的制备及辐射屏蔽性能研究[J]. 材料导报:研究篇,2014,28(1):60.
6 Kim J,Seo D, Lee B C,et al. Nano-W dispersed gamma radiation shielding materials[J]. Adv Eng Mater,2014,16(9):1083.
7 Ratnam C T,Kamaruddin S,Abdullah Z. Irradiation modification of PVC/NBR blend[J]. Polymer-Plastics Technol Eng,2011,50:833.
8 Xia Yingsong,Yu Ping,Zhang Yuchuang. Application and development of research on NBR/PVC alloy[J]. Anhui Chem Ind,2003,39(2):8(in Chinese).
夏迎松,宇平,章于川. 丁腈橡胶/聚氯乙烯合金的研究进展及应用[J]. 安徽化工,2013,39(2):8.
9 Wang Fei. Development of oil and flame retardant sheathing compound based on NBR/PVC blend[J].World Rubber Ind,2014,41(2):27(in Chinese).
王飞. 共混型NBR/PVC耐油阻燃电缆护套料的研制[J]. 世界橡胶工业,2014,41(2):27.
10 El-Nemr K F,Khattab M M,Abdel-Rahman H A. Effect of electron beam irradiation on physico-mechanical and chemical properties of NBR-PVC loaded with cement kiln dust[J]. J Adhesion Sci Technol,2011,25(9):1017.
11 Leng Jing. Development of flame retardant sheathing compound based on polymer alloy rubber[J]. Electic Wire Cable,2006(2):29(in Chinese).
冷静. 橡塑合金橡胶阻燃护套料的研制[J]. 电线电缆,2006(2):29.
12 Hafezi M,Khorasani S N,Ziaei F,et al. Comparison of physicomechanical properties of NBR-PVC blend cured by sulfur and electron beam[J]. J Elastomers Plastics,2007,39(2):151.
13 Zhou Shaochang. Rubber and plastic alloy and its application in rubber industry[J]. China Rubber,2008,24(21):37(in Chinese).
周绍昌. 橡塑合金橡胶及其在橡胶制品行业中的应用[J]. 中国橡胶,2008,24(21):37.
14 Yu Jinggang. The application of NBR/PVC[J]. Elastomerics,2001,11(4):52(in Chinese).
于景刚. NBR/PVC共混胶的应用[J]. 弹性体,2001,11(4):52.
15 Arutunian S G,Bergoz J,Chung M,et al. Thermal neutron flux monitors based on vibrating wire[J]. Nuclear Instruments Methods Phys Res Section A,2015,797:37.
[1] 汪愿, 孙运刚, 符彬, 刘文浩, 宣善勇, 刘鹏. 基于VARI工艺的碳纤维复合材料快速修理飞机铝合金裂纹的研究[J]. 材料导报, 2024, 38(6): 22020135-6.
[2] 肖民, 吴娟, 奚健杨, 李方贤, 祝雯, 韦江雄. 基于Mazars损伤模型评价不同粗糙度机制砂砂浆的抗裂性能[J]. 材料导报, 2024, 38(21): 23060117-6.
[3] 徐文卓, 李文晓, 苏钊阳, 时起珍. 纤维束拉伸件几何尺寸对界面横向拉伸强度影响分析[J]. 材料导报, 2024, 38(10): 22120125-9.
[4] 高静, 丁谦学, 梅其良, 肖学山. 核辐射综合屏蔽材料研究进展[J]. 材料导报, 2023, 37(20): 21120255-8.
[5] 胡帅帅, 许智鹏, 雷子萱, 陈双, 刘育红, 强军锋. 脂环族环氧-丙烯酸酯混杂光固化树脂的设计及性能研究[J]. 材料导报, 2023, 37(11): 21090171-8.
[6] 陈秋雨, 张城皓, 曹可, 陆永俊, 王连才, 张秀芹, 马慧玲, 翟茂林. 高分子基辐射防护材料研究进展[J]. 材料导报, 2022, 36(Z1): 21080080-4.
[7] 赵会阳, 王豪, 赵亮亮, 张炜楠, 王岩, 吴跃民, 于辉, 孙承月, 琚丹丹, 吴宜勇. 空间太阳电池柔性封装材料与技术研究进展[J]. 材料导报, 2022, 36(22): 22030104-11.
[8] 何颖, 刘峰, 蒋丹枫, 周江, 刘夏杰, 李珂娴, 沈先荣. 基于钨/钆三层结构的中子/γ一体化辐射防护服材料的设计[J]. 材料导报, 2022, 36(13): 21010270-4.
[9] 杨树桐, 李琳桢, 于淼. 碱激发海砂再生骨料混凝土的制备及其拉伸强度的确定[J]. 材料导报, 2021, 35(z2): 176-182.
[10] 陈谦, 王朝辉, 傅豪, 樊振通, 刘鲁清. 路用水性环氧树脂的拉伸强度预测和极值寻优[J]. 材料导报, 2021, 35(16): 16172-16177.
[11] 许智鹏, 吉静茹, 刘育红, 强军锋. UV固化脂环族环氧树脂体系的设计及其响应面优化[J]. 材料导报, 2021, 35(14): 14190-14197.
[12] 赵惠. 成型工艺对钨基复合材料界面组织和性能的影响[J]. 材料导报, 2020, 34(Z2): 351-355.
[13] 郝新超. 基于Anderson-Darling检验的复合材料厚板层间拉伸强度性能研究及B基准值[J]. 材料导报, 2020, 34(Z1): 480-485.
[14] 梁双强, 陈革, 周其洪, FrankKo. 含缺陷三维编织复合材料拉伸性能试验[J]. 材料导报, 2020, 34(14): 14209-14213.
[15] 张吴欣, 李志恒, 周梅琳, 尹玉, 刘凌云. T-ZnOw/硅橡胶复合材料的非线性电导特性研究[J]. 材料导报, 2020, 34(12): 12169-12172.
[1] Lanyan LIU,Jun SONG,Bowen CHENG,Wenchi XUE,Yunbo ZHENG. Research Progress in Preparation of Lignin-based Carbon Fiber[J]. Materials Reports, 2018, 32(3): 405 -411 .
[2] Haoqi HU,Cheng XU,Lijing YANG,Henghua ZHANG,Zhenlun SONG. Recent Advances in the Research of High-strength and High-conductivity CuCrZr Alloy[J]. Materials Reports, 2018, 32(3): 453 -460 .
[3] Yanchun ZHAO,Congyu XU,Xiaopeng YUAN,Jing HE,Shengzhong KOU,Chunyan LI,Zizhou YUAN. Research Status of Plasticity and Toughness of Bulk Metallic Glass[J]. Materials Reports, 2018, 32(3): 467 -472 .
[4] Xinxing ZHOU,Shaopeng WU,Xiao ZHANG,Quantao LIU,Song XU,Shuai WANG. Molecular-scale Design of Asphalt Materials[J]. Materials Reports, 2018, 32(3): 483 -495 .
[5] Yongtao TAN, Lingbin KONG, Long KANG, Fen RAN. Construction of Nano-Au@PANI Yolk-shell Hollow Structure Electrode Material and Its Electrochemical Performance[J]. Materials Reports, 2018, 32(1): 47 -50 .
[6] Ping ZHU,Guanghui DENG,Xudong SHAO. Review on Dispersion Methods of Carbon Nanotubes in Cement-based Composites[J]. Materials Reports, 2018, 32(1): 149 -158 .
[7] Fangyuan DONG,Shansuo ZHENG,Mingchen SONG,Yixin ZHANG,Jie ZHENG,Qing QIN. Research Progress of High Performance ConcreteⅠ:Raw Materials and Mix Proportion Design Method[J]. Materials Reports, 2018, 32(1): 159 -166 .
[8] Guiqin HOU,Yunkai LI,Xiaoyan WANG. Research Progress of Zinc Ferrite as Photocatalyst[J]. Materials Reports, 2018, 32(1): 51 -57 .
[9] Jianxiang DING,Zhengming SUN,Peigen ZHANG,Wubian TIAN,Yamei ZHANG. Current Research Status and Outlook of Ag-based Contact Materials[J]. Materials Reports, 2018, 32(1): 58 -66 .
[10] Jing WANG,Hongke LIU,Pingsheng LIU,Li LI. Advances in Hydrogel Nanocomposites with High Mechanical Strength[J]. Materials Reports, 2018, 32(1): 67 -75 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed