连续纤维增强复合材料点阵结构成型工艺研究进展

doi:10.11896/cldb.22020059

Abstract
Figure/Table
References
Related Citation (4)

Download:

Full Text ( PDF ) (59612KB)
Export: BibTeX | EndNote (RIS)

Abstract Continuous fiber reinforced polymer composite (CFRP) has the advantages of high specific stiffness and specific strength, and has been widely used in the fields of aerospace, automotive electronics, defense and military industries. Composite lattice structures have high structural efficiency and are widely used in lightweight sandwich structures, which play a key role in carrying structural loads. However, due to its complex structure, large-scale integrated manufacturing of lightweight lattice structures remains a technical challenge for researchers. This paper summarizes the forming process of continuous fiber reinforced composites 2D lattice and 3D lattice structures. Aiming at different forming processes of lattice structure, this paper analyzes the forming process, process characteristics and structural damage forms, and further comprehensively compares the advantages and disadvantages of each forming process. Finally, the future development of the continuous fiber reinforced composite lattice structures forming process is prospected.

Key words： continuous fiber reinforced composite lattice structure forming process

Published: 10 October 2023 Online: 2023-09-28

CLC number:

TB332

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	RAN Xudong
	HUANG Shuhai
	ZHANG Peng
	HAN Zhenyu
	ZHOU Shaolan
	CHEN Qiang

Cite this article:

RAN Xudong,HUANG Shuhai,ZHANG Peng, et al. Research Progress of Forming Process of Continuous Fiber Reinforced Polymer Composite Lattice Structure[J]. Materials Reports, 2023, 37(19): 22020059-12.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22020059 OR http://www.mater-rep.com/EN/Y2023/V37/I19/22020059

1 Akil H M, Omar M F, Mazuki A A M, et al. Materials & Design, 2011, 32(8-9), 4107.
2 Rajak D K, Pagar D D, Kumar R, et al. Journal of Materials Research and Technology, 2019, 8(6), 6354.
3 Jawaid M, Abdul Khalil H P S. Carbohydrate Polymers, 2011, 86(1), 1.
4 Maria M. Incas Bulletin, 2013, 5(3), 139.
5 Zhang X, Chen Y, Hu J. Progress in Aerospace Sciences, 2018, 97, 22.
6 Kushwaha S, Bagha A K. Materials Today:Proceedings, 2020, 26, 1567.
7 Evans A G, Hutchinson J W, Fleck N A, et al. Progress in Materials Science, 2001, 46(3), 309.
8 Deshpande V S, Ashby M F, Fleck N A. Acta Materialia, 2001, 49(6), 1035.
9 Fan H L, Meng F H, Yang W. Composite Structures, 2007, 81(4), 533.
10 Fan H L, Jin F N, Fang D N. Composites Science and Technology, 2008, 68(15-16), 3380.
11 Attard D, Farrugia P S, Gatt R, et al. International Journal of Mechanical Sciences, 2020, 179, 105631.
12 Chen J, Zhang X, Okabe Y, et al. Materials & Design, 2017, 131, 481.
13 Chen J, Zhang X, Okabe Y, et al. Science China Technological Sciences, 2019, 62(1), 87.
14 Fan H L, Jin F N, Fang D N. Materials & Design, 2009, 30(3), 511.
15 Fan H, Zeng T, Fang D, et al. Acta Mechanica Sinica, 2010, 26(6), 825.
16 Wang J, Evans A G, Dharmasena K, et al. International Journal of Solids and Structures, 2003, 40(25), 698.
17 Kooistra G W, Deshpande V S, Wadley H. Acta Materialia, 2004, 52(14), 4229.
18 Li X, Wu L, Ma L, et al. Mechanics of Advanced Materials and Structures, 2018, 26(10), 866.
19 Fu A, Fs B, Hst A. Materials Today Communications, 2020, 24, 101102.
20 Qi D, Yu H, Liu M, et al. International Journal of Mechanical Sciences, 2019, 163, 105091.
21 Han B, Zhang Z, Zhang Q, et al. Extreme Mechanics Letters, 2017, 10, 58.
22 Hu B, Wu L, Xiong J, et al. Mechanics of Materials, 2019, 129, 290.
23 Wu Q, Vaziri A, Asl M E, et al. Journal of the Mechanics and Physics of Solids, 2019, 125, 112.
24 Liu Y, Dong Z, Liang J, et al. International Journal of Mechanical Sciences, 2019, 152, 568.
25 Zhang J, Lu G, You ZComposites Part B:Engineering, 2020, 201, 108340.
26 Luo Y, Fan H. Thin-Walled Structures, 2018, 125, 100.
27 Xu F, Zhang X, Zhang H. Engineering Structures, 2018, 171, 309.
28 Hu B, Wu L, Xiong J, et al. Mechanics of Materials, 2019, 129, 290.
29 Xue R, Cui X, Zhang P, et al. Extreme Mechanics Letters, 2020, 40, 100918.
30 Rong Y, Liu J, Luo W, et al. Composites Part B:Engineering, 2018, 152, 324.
31 An X, Lai C, He W, et al. Extreme Mechanics Letters, 2019, 33, 100577.
32 Wang Y, Ramirez B, Carpenter K, et al. Extreme Mechanics Letters, 2019, 33, 100557.
33 Xu G, Zeng T, Cheng S, et al. Composite Structures, 2019, 229, 111466.
34 An X, Fan H, Zhang C. Journal of Sound and Vibration, 2020, 475, 115292.
35 An X, Lai C, Fan H, et al. International Journal of Solids and Structures, 2020, 191-192, 293.
36 Qiao J X, Chen C Q. International Journal of Impact Engineering, 2015, 83, 47.
37 Hoo Fatt M S, Sirivolu D. Marine Structures, 2017, 56, 163.
38 Rong Y, Liu J, Luo W, et al. Composites Part B:Engineering, 2018, 152, 324.
39 Zhang X, An C, Shen Z, et al. Materials Today Communications, 2020, 23, 100918.
40 Lu Q, Qi D, Ying L, et al. Thin-Walled Structures, 2019, 140, 495.
41 Yan H, Yang X, Lu T, et al. Applied Thermal Engineering, 2017, 127, 1293.
42 Yan H, Zhang Q, Chen W, et al. Applied Thermal Engineering, 2020, 166, 114687.
43 Wang X, Wei K, Wang K, et al. Applied Thermal Engineering, 2020, 173, 115205.
44 Stocchi A, Colabella L, Cisilino A, et al. Materials & Design, 2014, 55, 394.
45 Vitale J P, Francucci G, Stocchi A. Journal of Sandwich Structures & Materials, 2016, 19(1), 66.
46 Wei X, Li D, Xiong J. Composites Science and Technology, 2019, 184, 107878.
47 Wei X, Wu Q, Gao Y, et al. Mechanics of Materials, 2020, 148, 103401.
48 Liu J, Liu J, Mei J, et al. Composites Science and Technology, 2018, 159, 87.
49 Jiang S, Sun F, Zhang X, et al. Composite Structures, 2017, 176, 55.
50 Yu G, Feng L, Wu L. Materials & Design, 2016, 102, 238.
51 Feng L, Yang Z, Yu G, et al. Composite Structures, 2018, 201, 845.
52 Wu H, Lai C, Sun F, et al. Acta Astronautica, 2018, 145, 268.
53 Li M, Sun F, Lai C, et al. Composites Science and Technology, 2018, 157, 152.
54 Hou Z, Tian X, Zhang J, et al. Composite Structures, 2018, 184, 1005.
55 Quan C, Han B, Hou Z, et al. Composites Part B:Engineering, 2020, 187, 107858.
56 Sugiyama K, Matsuzaki R, Ueda M, et al. Composites Part A:Applied Science and Manufacturing, 2018, 113, 114.
57 Xiong J, Ma L, Wu L, et al. Composite Structures, 2010, 92(11), 2695.
58 Yin S, Wu L, Ma L, et al. Composite Structures, 2011, 93(12), 3104.
59 Mei J, Liu J, Liu J. Composites Part A:Applied Science and Manufacturing, 2017, 102, 28.
60 Liu J, Qiao W, Liu J, et al. Composites Part A:Applied Science and Manufacturing, 2015, 73, 93.
61 Zhang G, Ma L, Wang B, et al. Composites Part B:Engineering, 2012, 43(2), 471.
62 Wang B, Wu L, Ma L, et al. Materials & Design, 2010, 31(5), 2659.
63 Ming L L W L. Journal of Materials Science & Technology, 2011, 27(6), 570.
64 Yin S, Li J, Liu B, et al. Composite Structures, 2017, 160, 1147.
65 Schneider C, Velea M N, Kazemahvazi S, et al. Materials & Design (1980-2015), 2015, 65, 1110.
66 Hu Y, Li W, An X, et al. Composites Science and Technology, 2016, 125, 114.
67 Li W, Sun F, Wang P, et al. Composites Part A:Applied Science and Manufacturing, 2016, 81, 313.
68 George T, Deshpande V S, Wadley H N G. Composites Part A:Applied Science and Manufacturing, 2013, 47, 31.
69 K F, G K, Hng W, et al. International Journal of Materials Research, 2007, 98(12), 1264.
70 Feng L, Wu L, Yu G. Materials & Design, 2016, 99, 581.
71 Wu Q, Ma L, Wu L, et al. Composite Structures, 2016, 153, 585.
72 Dong L, Wadley H. Composites Science and Technology, 2015, 119, 26.
73 Dong L, Wadley H. Composites Part A:Applied Science and Manufacturing, 2016, 81, 182.
74 Xu B, Yin S, Wang Y, et al. Composites Part A:Applied Science and Manufacturing, 2017, 97, 41.
75 Liu X, Alizadeh V, Hansen C J. Composite Structures, 2020, 239, 111999.
76 Li X, Wu L, Ma L, et al. Theoretical and Applied Mechanics Letters, 2016, 6(2), 76.
77 Xiong J, Vaziri A, Ghosh R, et al. Extreme Mechanics Letters, 2016, 7, 114.
78 Xu G, Zhai J, Zeng T, et al. Composite Structures, 2015, 119, 666.
79 Hu J, Liu A, Zhu S, et al. Composite Structures, 2020, 251, 112659.
80 Hu J, Zhu S, Wang B, et al. Journal of Sandwich Structures & Materials, 2021, 23(6), 2422.
81 Kim H, Cho B H, Hur H, et al. Materials & Design, 2015, 65, 231.
82 Lee B, Lee K, Byun J, et al. Composites Part B:Engineering, 2012, 43(2), 317.
83 Sun Y, Li Y. Composites Science and Technology, 2017, 150, 95.
84 Du Y, Song C, Xiong J, et al. Composites Science and Technology, 2019, 174, 94.
85 Li W, Zheng Q, Fan H, et al. Engineering, 2020, 6(2), 196.
86 Lai C, Wang J, Liu C, et al. Composites Science and Technology, 2015, 113, 63.
87 Mohammadi M, Sadeghi A. Proceedings of the Institution of Mechanical Engineers, Part E:Journal of Process Mechanical Engineering, 2020, 234(2), 222.
88 Liu S, Li Y, Li N. Materials & Design, 2018, 137, 235.
89 Hunt C J, Morabito F, Grace C, et al. Composite Structures, 2022, 284, 115120.
90 Liu G, Xiong Y, Zhou L, Composites Communications, 2021, 27, 100907.
91 Li N, Link G, Jelonnek J. CIRP Annals-Manufacturing Technology, 2020, 69(1), 221.
92 Chen X, Fang G, Liao W H, et al, Additive Manufacturing, 2022, 49, 102470.
93 Li N, Link G, Wang T, et al. Composites Part B:Engineering, 2020, 182(C), 107612.
94 Zhang H, Chen J, Yang D. Additive Manufacturing, 2021, 38, 101775.