金属电弧增材成形控制关键技术及研究现状

doi:10.11896/cldb.20090337

Abstract
Figure/Table
References
Related Citation (1)

Download:

Full Text ( PDF ) (7936KB)
Export: BibTeX | EndNote (RIS)

Abstract Metal arc additive manufacturing is an efficient and low-cost rapid net forming process, which is very suitable for the overall manufacturing of large-size metal parts. However, a series of non-equilibrium temporal variations such as heat accumulation, heat dissipation boundary conditions and deposition layer surface conditions, have been found to lower the dimensional accuracy of the formed parts, thereby directly handicapping the industrial application. On this regard, this paper takes the stability control of the arc additive forming process as the objective, and provides detailed investigation and analysis of the current research and technical advantages of the wire arc additive manufacturing. The key scientific and technical issues are proposed and outlooked, which imply the countermeasures of adjusting the additive manufacturing process stability to solve the aforementioned issues involving dimensional accuracy and surface quality. A prospective discussion on the future trends is also given in order to provide a useful reference for arc additive process stability control and improvement of forming dimensional accuracy.

Key words： wire arc additive manufacturing near net shape dynamic behavior of molten pool stability control

Published: 25 June 2022 Online: 2022-06-24

CLC number:

TG455

Fund:National Natural Science Foundation of China (51905245), Key Research and Development Project of Gansu (20YF8GA054), Natural Science Foundation of Gansu (20JR5RA455), 2022 Longyuan Youth Innovation and Entrepreneurship Talents (Team) Project, Optic-Electromechanical Equipment Technology Beijing Key Laboratory Opening Fund Project, Hong Liu Excellent Youth Supported Project of Lanzhou University of Technology, and the “The Light of the West” Young Scholars Program of the Chinese Academy of Sciences.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	SHI Yu
	ZHU Zhenwen
	ZHANG Gang
	LI Lupeng

Cite this article:

SHI Yu,ZHU Zhenwen,ZHANG Gang, et al. Key Technology and Status of Metal Arc Additive Morphology Control[J]. Materials Reports, 2022, 36(12): 20090337-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20090337 OR http://www.mater-rep.com/EN/Y2022/V36/I12/20090337

1 Lu B H, Li D C. Machine Building & Automation, 2013(4), 7(in Chinese).
卢秉恒, 李涤尘. 机械制造与自动化, 2013(4),7.
2 Xiong J T, Di H B, Lin X. Aeronautical Manufacturing Technology, 2015, 58(23/24),80(in Chinese).
熊江涛, 耿海滨, 林鑫, 等. 航空制造技术,2015,58(23/24),80.
3 Wang H M, Zhang S Q, Wang T, et al. Journal of Xihua University(Na-tural Science Edition), 2018, 37(4), 9(in Chinese).
王华明, 张述泉, 王韬, 等.西华大学学报(自然科学版), 2018, 37(4),9.
4 Xu H L, Chen X Z, Xu G F, et al. Materials Reports A: Review Papers, 2015(6),114(in Chinese).
徐辉丽, 陈希章, 徐桂芳, 等. 材料导报:综述篇, 2015(6),114.
5 Lu B H. Science & Technology Association Forum, 2016(10),11(in Chinese).
卢秉恒. 科协论坛, 2016(10),11.
6 Huang W D. Advanced Materials Industry, 2013(8),16(in Chinese).
黄卫东. 新材料产业, 2013(8),16.
7 Mughal M P, Fawad H, Mufti R A. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996 (vols 203-210), 2006, 220(6),875.
8 Williams S W, Martina F, Addison A C, et al.Materials Science and Technology, 2016, 32 (7),641.
9 Ding J, Colegrove P, Mehnen J, et al. International Journal of Advanced Manufacturing Technology, 2014, 70(1/4),227.
10 Ding J, Colegrove P, Mehnen J, et al. Computational Materials Science, 2011, 50(12),3315.
11 Wang F D, Williams S, Rush M. International journal of Manufacture Technology, 2011, 57,597.
12 Xu J Q, Peng Y, Zhou Q, et al. Transactions of the China Welding Institution, 2019, 40(9),8 (in Chinese).
徐俊强, 彭勇, 周琦, 等. 焊接学报, 2019, 40(9),8.
13 Frazier W E. Journal of Materials Engineering＆ Performance, 2014, 23(6),1917.
14 Yong H, Ming C L, Mazumder J, et al. Journal of Manufacturing Science & Engineering, 2015, 137( 1) ,14001.
15 DUDAT. IFAC-Papers On Line, 2016, 49(29),103.
16 Bo J Q, Fan C L, Lin S B,et al. Transactions of the China Welding Institution, 2016, 37(3), 115(in Chinese).
柏久阳, 范成磊, 林三宝,等. 焊接学报, 2016, 37(3),115.
17 Sun F J, Feng R H, Liu S Y. Electric Welding Machine, 2018,48(6), 8(in Chinese).
孙福建, 冯曰海,刘思余. 电焊机, 2018, 48(6),8.
18 Luo Z, Zhang Y, Jia P. Welding Joining, 2016(4),13(in Chinese).
罗震, 张禹, 贾鹏. 焊接, 2016(4), 13.
19 Feng Y, He L, Wang K, et al. Journal of Materials Engineering & Performance, 2018, 27,302.
20 Ayarkwa K F, Williams S M, Ding J. Additive Manufacturing, 2017, 18, 186.
21 Han Q L, Li D Y, Sun H J, et al. International Journal of Advanced Ma-nufacturing Technology, 2019, 104,9.
22 Zuo W, Ma L, Lu Y, et al. Metals and Materials International, 2018, 24,1346.
23 Yang D Q, He C J, Zhang G G. Journal of Materials Processing Technology, 2016, 227,153.
24 Mao Y G, Zeng Y, Wang T, et al. Transactions of the China Welding Institution, 2015, 36(7),5(in Chinese).
苗玉刚, 曾阳, 王腾, 等. 焊接学报, 2015, 36(7), 5.
25 Gao C,Chen X, Su C, et al. Materials Express, 2019, 9(2),179.
26 Lu Z Y, Liu F, Jiang F, et al. Rare Metal Materials and Engineering, 2019,48(2),524(in Chinese).
卢振洋, 刘峰, 蒋凡, 等. 稀有金属材料与工程, 2019, 48(2), 524.
27 Spaniol E, Ungethüm T, Trautmann M, et al. Welding in the World, Le Soudage Dans Le Monde, 2020, 64, 1329.
28 Liang Z, Jinglong L, Yi L, et al. The International Journal of Advanced Manufacturig Technology, 2018, 99,1521.
29 Luo Y, Li J, Xu J, et al. Journal of Materials Processing Technology, 2018, 259,353.
30 Liang Z, Jinglong L, Yi L, et al. Additive Manufacturing Technology. 2018, 134,154.
31 Jie X, Yi L, Liang Z. et al. Measurement, 2019, 134,25.
32 Eimer E, Suder W, Williams S, et al. Welding in the World, 2020, 64(7),1313.
33 Gong M C, Meng Y F, Zhang S, et al. Additive Manufacturing, 2020, 33,101180.
34 Xiong J, Yin Z, Zhang W. International Journal of Advanced Manufactu-ring Technology, 2016, 87(1-4),579.
35 Xiong J, Zhang G, Qiu Z, et al. Journal of Cleaner Production, 2013, 419(2),82.
36 Xiong J, Zhang G. Measurement Science and Technology, 2013, 24(11),5103.
37 Xiong J, Li Y J, Yin Z Q, et al. Chinese Journal of Mechanical Enginee-ring, 2018, 31(1),133.
38 Luo Y, Zhang H, Wang F M. Welding Technology, 2009, 38(4), 41(in Chinese).
罗勇, 张华, 王富明. 焊接技术, 2009, 38(4), 41.
39 Luo Y, Zhang H, Li Y H, et al, Laser Technology, 2007, 31(4) (in Chinese).
罗勇, 张华, 李月华, 等. 激光技术, 2007, 31(4),367.
40 Kwak Y M, Doumanidis C C. Journal of Manufacturing Processes, 2002, 4(1),28.
41 Charalabos Doumanidis,Yong Min Kwak. International Journal of Pressure Vessels & Piping, 2002, 79(4), 251.
42 Xu J N, Zhang H, Zhang G Y. In: Conference Record of the 2008 IEEE on Cybernetics and Intelligent Systems,Chengdu, China, 2008, pp. 976.
43 Xiong J, Yin Z, Zhang W. Journal of Materials Processing Technology, 2018, 233, 100.
44 Xiong J, Yin Z, Zhang W. The International Journal of Advanced Manufacturing Technology, 2016, 87(1-4), 579.
45 Yin F. Study on forming process and dimension precision control of stainless steel arc additive manufacturing. Master's Thesis, Nanjing University of Science and Technology, China, 2017(in Chinese).
尹凡. 不锈钢电弧增材制造成形工艺研究及尺寸精度控制. 硕士学位论文, 南京理工大学, 2017.
46 Sagar H N, Neelesh K J, Mayur S. The International Journal of Advanced Manufacturing Technology, 2020, 106(3),1239.
47 Xiao Y C. Forming control and performance analysis of duplex stainless steel arc additive manufacturing. Master's Thesis, Yanshan University, China, 2017(in Chinese).
肖雨晨.双相不锈钢电弧增材制造的成形控制与性能分析. 硕士学位论文, 燕山大学, 2017.
48 Cong B Q, Su Y, Qi B J, et al. Aerospace Manufacturing Technology, 2016(3), 29(in Chinese).
从保强, 苏勇, 齐铂金, 等.航天制造技术, 2016(3), 29.
49 Song E J. Study on shape control technology of low carbon steel MAG arc additive manufacturing. Master's Thesis, Xiangtan University, China, 2017 (in Chinese).
宋二军. 低碳钢MAG电弧增材制造控形技术研究. 硕士学位论文, 湘潭大学, 2018.
50 Ma Q, Ma S Y, Liu C M, et al. Hot Working Technology, 2018, 47(1), 189(in Chinese).
马倩, 马树元, 刘长猛,等.热加工工艺, 2018, 47(1),189.
51 Zhao X X, Sun C, Ye F X, et al. Welding Joining, 2016(4), 33(in Chinese).
赵孝祥, 孙策, 叶福兴, 等. 焊接, 2016(4), 33.
52 Yin Y H, Hu S S, Liu W L, et al. Ordnance Material Science and Engineering, 2008, 31(4), 55(in Chinese).
尹玉环, 胡绳荪, 刘望兰, 等. 兵器材料科学与工程, 2008, 31(4), 55.
53 Li T X. Research on the fabrication and molding technology of CMT arc additive for typical thin-walled structural parts. Master's Thesis, Tianjin Polytechnic University, China, 2019 (in Chinese).
李天旭. 典型薄壁结构件CMT电弧增材制造成形技术研究. 硕士学位论文, 天津工业大学, 2019.
54 Xia R F. Study on optimization of forming size and process parameters of arc additive manufacturing. Master's Thesis, Huazhong University of Science and Technology, China, 2016 (in Chinese).
夏然飞. 电弧增材制造成形尺寸及工艺参数优化研究. 硕士学位论文, 华中科技大学, 2016.
55 Ortega A G, Galvan L C, Deschaux-Beaume F, et al. Science and Technology of Welding and Joining, 2018, 23(4), 316.
56 Zhou X M, Zhang H O, Wang G L, et al. Acta Physica Sinica, 2016,65(3),331(in Chinese).
周祥曼, 张海鸥, 王桂兰, 等. 物理学报, 2016, 65(3), 331.
57 Xing T H. Numerical simulation and process optimization of thermal field of duplex stainless steel arc additive manufacturing. Master's Thesis, Yanshan University, China, 2018 (in Chinese).
邢天航. 双相不锈钢电弧增材制造热力场数值模拟与工艺优化. 硕士学位论文, 燕山大学, 2018.
58 Oyama K, Diplas S, M'Hamdi M, et al. Additive Manufacturing, 2019, 26, 180.
59 Zhou X. Numerical simulation of heat and mass transfer in arc and melt pool in arc additive manufacturing. Master's Thesis, Huazhong University of Science and Technology, China, 2018 (in Chinese).
周星. 电弧增材制造中电弧和熔池热质传递数值模拟. 硕士学位论文, 华中科技大学, 2018.
60 Xu G, Hu J, Tsai H L. Journal of Applied Physics, 2008, 104(10), 129.