410马氏体不锈钢块体材料的冷金属过渡焊电弧增材制造与性能表征

doi:10.11896/cldb.20050144

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (5623KB)
Export: BibTeX | EndNote (RIS)

Abstract Wire arc additive manufacturing (WAAM) has unique advantages of high efficiency, low cost and no limitation of forming size, showing application prospects in the field of novel manufacturing and repair. Obtaining WAAM parts with good mechanical properties and uniform microstructure is the problem that needs to be solved urgently. In this study, two kinds of martensitic stainless steel 410 (SS 410) block parts were prepared by wire and arc additive manufacturing system based on cold metal transfer (CMT). The results of optical microscope (OM), scanning electron microscope (SEM) and mechanical properties test showed that the as-deposited parts with uniform microstructure, average hardness of 530HV, average tensile strength of 1 196 MPa and uniform elongation can be obtained. The mechanical properties of as-deposited parts were discussed, and compared with wrought and laser additive manufacturing H13 hot work die steel. This work analyzed reasons for the difference between the properties of WAAM parts and forgings, examined the feasibility of using as-deposited stainless steel 410 in repairing, and explained the ways to improving mechanical properties of WAAM parts.

Key words： wire arc additive manufacturing (WAAM) cold metal transfer (CMT) martensitic stainless steel 410 (SS 410) mechanical property

Published: 03 August 2021

CLC number:

TG142.1

Fund:National Key Research and Development Program of China (2017YFB1104803), the National Natural Science Foundation of China (51005004), and Beijing Natural Science Foundation (3132006).

About author:: Bingyue Zhu started studying at the College of Mate-rials Science and Engineering of Beijing University of Technology in September 2018, focusing on the research of wire arc additive manufacturing technology.
Jian Lin received his Ph.D. degree in materials processing engineering from Tsinghua University's mechanical engineering department in 2006. He worked as a postdoctoral researcher at the institute of Materials Science and Engineering in Beijing University of Technology from September, 2006 to August, 2008. Then he joined the College of Materials Science and Enginee-ring of Beijing University of Technology in August, 2008. He went to the Joining and Welding research institute in Osaka University in Japan in the 2011, 2013 and 2018 for short-term research visits. He had been a visiting scholar in Missouri University of Science and Technology, USA, from 2015 to 2016. Now, Jian Lin is an associate professor in Beijing University of Technology. His research fields are stress and distortion analysis in materials processing and reliability analysis in microelectronic materials.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHU Bingyue
	LIN Jian
	LEI Yongping
	FU Hanguang
	ZHANG Yongqiang
	CHENG Sihua

Cite this article:

ZHU Bingyue,LIN Jian,LEI Yongping, et al. Preparation and Characterization of Martensitic Stainless Steel 410 Block Parts by CMT Wire Arc Additive Manufacturing[J]. Materials Reports, 2021, 35(14): 14150-14155.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20050144 OR http://www.mater-rep.com/EN/Y2021/V35/I14/14150

1 Li M X, Zhang T, Yu F, et al. Aeronautical Manufacturing Technology, 2019, 62(17), 55 (in Chinese).
李明祥, 张涛, 于飞, 等. 航空制造技术, 2019, 62(17), 55.
2 Huang Y J, Liu J H, Yang J H, et al. China Metallurgy, 2019, 29(11), 6(in Chinese).
黄永建, 刘军会, 杨进航, 等. 中国冶金, 2019, 29(11), 6.
3 Guan Q. Welding & Joining, 2014(5), 1(in Chinese).
关桥. 焊接, 2014(5), 1.
4 Han T Y, Kuo C H, Sridharan N, et al. Materials Science & Engineering A, 2020, 769, 2.
5 Shen H Y, Chen H B. Journal of Shanghai Jiaotong University, 2016, 50(S1), 114(in Chinese).
沈鸿源, 陈华斌. 上海交通大学学报, 2016, 50(S1), 114.
6 Zhang J S, Xiao G Q, Deng C Y. Forging & Stamping Technology, 2020(7), 165(in Chinese).
张建生, 肖贵乾, 邓长勇. 锻压技术, 2020(7), 165.
7 Guo Z L, Lasne P, Saunders N, et al. Procedia Manufacturing, 2018,15, 372.
8 Ge J G, Lin J, Lei Y P, et al. Materials Science & Engineering A, 2018,715, 144.
9 Yan J J, Song H, Dong Y P, et al. Materials Science & Engineering A, 2020,773, 138845.
10 Yan K, Chen C J, Zhang M, et al. China Surface Engineering, 2017, 30(2), 134(in Chinese).
严凯, 陈长军, 张敏, 等. 中国表面工程, 2017, 30(2), 134.
11 Zhang J X, Huang J F, Wang H B, et al. Acta Metallurgica Sinica, 2014, 50(7), 787 (in Chinese).
张金祥, 黄进峰, 王和斌, 等. 金属学报, 2014, 50(7), 787.
12 Pei Y K, Ma D S, Liu B S, et al. Iron & Steel, 2012, 47(2), 81(in Chinese).
裴悦凯,马党参,刘宝石, 等. 钢铁, 2012, 47(2), 81.
13 Wang T T, Zhang Y B, Wu Z H, et al. Vacuum, 2018,149, 185.
14 Seluck C. Powder Metallurgy, 2013, 54(2), 94.
15 Lin P, Ma D S, Chi H X, et al. Materials for Mechanical Engineering, 2017, 41(Z2),1(in Chinese).
林鹏, 马党参, 迟宏宵, 等. 机械工程材料, 2017, 41(Z2),1.
16 Zheng D L. Fabrication of H13 steel by selective laser melting and resi-dual stress analysis. Master's Thesis, Harbin Institute of Technology, China, 2016(in Chinese).
郑东来. H13钢的选择性激光熔化制备及残余应力分析. 硕士学位论文, 哈尔滨工业大学, 2016.
17 Džugan J, Halmešová K, Ackermann M,et al. Thermochimica Acta, 2020,683, 178479.
18 Huang J F, Cai Y L, Yu Y P, et al. Acta Scientiarum Naturalium Universitatis Pekinensis, 2011, 33(1), 28(in Chinese).
黄进峰, 蔡玉丽, 于一鹏, 等. 北京科技大学学报, 2011, 33(1), 28.
19 Zhao L, Wei S T, Wu D, et al. Journal of Materials Science & Technology, 2020, 57, 33.
20 Yang K, Liang Y, Yan W, et al. Acta Metallurgica Sinica, 2020, 56(1), 53(in Chinese).
杨柯, 梁烨, 严伟, 等. 金属学报, 2020, 56(1), 53.
21 Sun X. Electric Welding Machine, 2019, 49(8), 14(in Chinese).
孙咸. 电焊机, 2019, 49(8), 14.
22 Li Q, Zhao G R, Ma W Y, et al. Materials Reports B:Research Papers, 2020, 34(2), 4073(in Chinese).
李卿, 赵国瑞, 马文有, 等. 材料导报:研究篇, 2020, 34(2), 4073.
23 Wang W Q, Li Y Q, Li X, et al. Materials Reports B:Research Papers, 2020, 34(1), 2077(in Chinese).
王文权, 李雅倩, 李欣, 等. 材料导报:研究篇, 2020, 34(1), 2077.
24 Liu Y B, Jin P, Wang J F, et al. Aeronautical Manufacturing Technology, 2019, 62(Z1), 58(in Chinese).
刘一搏, 靳鹏, 王建峰, 等. 航空制造技术, 2019, 62(Z1), 58.
25 Åsberg M, Fredriksson G, Hatami S, et al. Materials Science & Engineering A, 2018, 742, 584.
26 Wołosz P, Baran A, Polański M. Journal of Alloys and Compounds, 2020,823, 153840.