METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Research Status of Texture Evolution of As-rolled Molybdenum in Preparation Process |
LI Yan1, ZHOU Zenglin1,2,3, HE Xueliang1, CHEN Wenshuai1,2,3, HUI Zhilin1
|
1 GRIMAT Engineering Institute Co., Ltd., Beijing 101407, China 2 State Key Laboratory of Advanced Materials for Smart Sensing, GRINM Group Corporation Limited, Beijing 100088, China 3 General Research Institute for Nonferrous Metals, Beijing 100088, China |
|
|
Abstract Compared with molybdenum alloys, the improvement of application performance of pure molybdenum rolled sheet, strip and foil is more focused on improving the purity of raw materials and optimizing the microstructure. In view of this, the texture formed by the preferential distribution of grain orientation during sintering, rolling and annealing process, should be paid more attention. While recent advances in texture analysis techniques, such as X-ray diffraction and electron backscatter diffraction, have provided sufficient support for more in-depth understanding on texture,relevant research of molybdenum texture is confined to texture state in a certain status, such as hot rolling, cold rolling or annealing. The literature on texture evolution of molybdenum materials in entire rolling and heat treatment process has not yet been published. The rolling and primary-recrystallizated texture of pure molybdenum sheet present typical texture components of impurity-free body-centered cubic metals, mainly including α-fiber components, such as {001}〈110〉 and {112}〈110〉,and γ-fiber ones, such as {111}〈110〉 and {111}〈112〉. Their formation has evolved as the following sequences: the existence of 〈100〉//ND, 〈110〉//ND, 〈112〉//ND or 〈113〉//ND texture in sintered molybdenum billet; the formation and enhancement of main texture components, {001}〈110〉 or {112}〈110〉, and γ-fiber ones during rolling process; enhanced {001}〈110〉 or {112}〈110〉, unchanged {111}〈110〉 and weakened {111}〈112〉 during partial recrystallization; the change of main texture components from {112}〈110〉 to {113}〈110〉 and {001}〈110〉 through full recrystallization. Based on the comparation of XRD and EBSD, this paper depicted the texture development of molybdenum material along the processing route for summarizing the relevant research work. In addition, the texture evolution of molybdenum was also compared with that of low carbon steel, which is also one of the most deeply researched BCC metals. This paper aims to provide a better understanding of texture evolution in this category of metals.
|
Published: 25 June 2022
Online: 2022-06-24
|
|
Fund:National Key R & D Program Special Project(2017YFB0306000). |
|
|
1 Liu G, Zhang G J, Jiang F, et al. Nature Materials, 2013, 12(4), 344. 2 Babinskya K, Weidowb J, Knablc W, et al. Materials Characterization, 2014, 87, 95. 3 Primig S, Clemens H, Knabl W, et al. International Journal of Refractory Metals & Hard Materials, 2015, 48, 179. 4 Leitner K, Scheiber D, Jakob S, et al. Materials & Design, 2018, 142, 36. 5 Mao W M. The crystallographic texture and anisotropy of metallic mate-rials, Science Press, China, 2002 (in Chinese). 毛卫民. 金属材料的晶体学织构与各向异性, 科学出版社, 2002. 6 Park K K, Cho J H, Han H N, et al. Key Engineering Materials, 2003, 233-236, 567. 7 Pöhl C, Schatte J, Leitner H. Materials Characterization, 2013, 77, 63. 8 Mao W M, Yang P, Chen L. Material texture analysis principle and detection technology, Metallurgical Industry Press, China, 2008 (in Chinese). 毛卫民, 杨平, 陈冷. 材料织构分析原理与检测技术, 冶金工业出版社, 2008. 9 Zheng P P, Chen L, He F, et al. Journal of Materials Science & Engineering, 2014, 32(2), 293 (in Chinese). 郑盼盼, 陈冷, 何飞, 等.材料科学与工程学报, 2014, 32(2), 293. 10 Mi X C. Baosteel Technology, 2005(S), 31 (in Chinese). 宓小川.宝钢技术, 2005(S), 31. 11 Wang G J. Textureanalysis in commercially pure titanum after equal channel angular pressing at room temperature. Master's Thesis, Xi’an University of Architecture and Technology, China, 2013 (in Chinese). 王耿洁. 室温ECAP变形工业纯钛的织构分析. 硕士学位论文, 西安建筑科技大学, 2013. 12 Wang X. Multi-scale investigation on mecroscopic simulation and microstructure evolution of pure Mo powder compactec by severe plastic deformatmn processing.Ph.D. Thesis, Hefei University of Technology, China, 2016 (in Chinese). 王雪. 纯钼粉大塑性变形的细管模拟及微观亚结构演化的多尺度研究. 博士学位论文,合肥工业大学, 2016. 13 Hosseini E, Kazeminezhad M. Materials Science and Engineering A, 2009, 526, 219. 14 Yang P. Electron backscatter diffraction technique and its application, Metallurgical Industry Press, China, 2007 (in Chinese). 杨平. 电子背散射衍射技术及其应用, 冶金工业出版社, 2007. 15 Chen S K, Li Q Y, Miao Z, et al. Rare Metal Materials and Engineering, 2006, 35(3), 500 (in Chinese). 陈绍楷, 李晴宇, 苗壮, 等. 稀有金属材料与工程, 2006, 35(3), 500. 16 Zhou Z L, Li Y, Xie Y F, et al. Rare Metal Materials and Engineering, 2019, 48(8), 2502 (in Chinese). 周增林, 李艳, 谢元锋, 等. 稀有金属材料与工程, 2019, 48(8), 2502. 17 Yu Y N. Principles of metallography (second edition ), Metallurgical Industry Press, China, 2013 (in Chinese). 余永宁. 金属学原理(第2版), 冶金工业出版社, 2013. 18 Zhang N, Mao W M. International Journal of Refractory Metals & Hard Materials, 2019, 80, 210. 19 Nikolic V, Wurster S, Firneis D, et al. Nuclear Materials and Energy, 2016, 9, 181. 20 Hirosuke I. ISIJ International, 1994, 34(4), 313. 21 Toth L S, Jonas J J, Daniel D, et al. Metallurgical Transactions A, 1990, 21, 2985. 22 Lyu Q G, Chen G N, Zhou J C, et al. Iron Steel Vanadium Titanium, 2001, 22(2), 1 (in Chinese). 吕庆功, 陈光南, 周家琮, 等.钢铁钒钛, 2001, 22(2), 1. 23 Samajdar I, Verlinden B, Vanhoutte P. Acta Materialia, 1998,46 (8), 2751. 24 Lee S N, Lee D N. International Journal of Mechanical Sciences, 2001, 43, 1997. 25 Kestens L, Jonas J J. ISIJ International, 1997, 37, 807. 26 Kestens L, Jonas J J, Van H P, et al. Metallurgical and Materials Tran-sactions A, 1996, 27(8), 2347. 27 Liu R Z, Wang K S, Sun Y J. Powder Metallurgy Technology, 2014, 32(2), 106 (in Chinese). 刘仁智, 王快社, 孙院军.粉末冶金技术, 2014, 32(2), 106. 28 Wang F, Zhou Z L, Li Y, et al. Physics and Engineering of Metallic Materials, Springer Procceedings in Physics, 2019, 217, 73. 29 Fu X Y, Zhou Z L, Li Y, et al. International Journal of Refractory Metals and Hard Materials, 2020, 93, 105341. 30 Oertel C G, Huensche I, Skrotzki W, et al. Materials Science and Engineering A, 2008, 483-484, 79. 31 Oertel C G, Huensche I, Skrotzki W, et al. International Journal of Refractory Metals & Hard Materials, 2010, 28, 722. 32 Liu Y S. Journal of Central-South Institute of Mining and Metallurgy, 1982(4), 79 (in Chinese). 刘毓舒.中南矿冶学院学报, 1982(4), 79. 33 You S W. Physical Testing and Chemical Analysis Part A:Physical Testing, 2000, 36(8), 342 (in Chinese). 尤世武. 理化检验(物理分册), 2000, 36(8), 342. 34 Li J W, Yang S T, Wei S Z, et al. Chinese Journal of Rare Metals, 2014, 38(3), 348 (in Chinese). 李继文, 杨松涛, 魏世忠, 等. 稀有金属, 2014, 38(3), 348. 35 Primig S, Leitner H, Knabl W, et al. Metallurgical and Materials Tran-sactions A, 2012, 43, 4794. 36 Primig S,Leitner H,Rodriguez A.International Journal of Refractory Metals & Hard Materials, 2010, 28(6), 703. 37 Primig S, Leitner H, Knabl W, et al. Metallurgical and Materials Tran-sactions A, 2012, 43(12), 4806. 38 Zhang X X, Yan Q Z, Lang S T, et al. Materials & Design, 2017, 126, 1. 39 Primig S, Leitner H, Knabl W, et al. Materials Science and Engineering A, 2012, 535, 316. 40 Bonk S, Reiser J, Hoffmann J, et al. International Journal of Refractory Metals & Hard Materials, 2016, 60, 92. 41 Primig S, Clemens H, Knabl W, et al. International Journal of Refractory Metals & Hard Materials, 2015, 48, 179. 42 Reiser J, Bonnekoh C, Karcher T, et al. International Journal of Refractory Metals & Hard Materials, 2020, 86, 105084. 43 Gazder A A, Hazra S S, Pereloma E V. Materials Science and Enginee-ring A, 2011, 530, 492. 44 Lobanov M L, Danilov S V, Pastukhov V I, et al. Materials & Design, 2016, 109, 251. |
|
|
|