POLYMERS AND POLYMER MATRIX COMPOSITES |
|
|
|
|
|
Research Progress in Tailoring the Microstructure of Resorcinol-Formaldehyde Organic/Carbon Aerogel |
YAN Jiao1,2, KUANG Minxuan1, HU Honglin2, KONG Lei2, MA Huiling2, ZHANG Xiuqin1
|
1 Beijing Engineering Research Center of Textile Nanofiber, School of Materials Science and Engineering, Beijing Institute of Fashion Technology, Beijing 100029, China 2 Science and Technology on Advanced Functional Composites Laboratory, Aerospace Research Institute of Materials & Processing Technology, Beijing 100076, China |
|
|
Abstract Because of the excellent ablation resistance and physical/chemical properties, phenolic/carbon aerogel has great potential in the fields of acoustic/thermal resistance material, absorption material, energy storage material, sensor, aerospace industry, etc. This mini-review introduced the main factors in the synthesis of resorcinol-formaldehyde organic/carbon aerogel, including catalyst, additives and drying methods. First, the catalytic mechanism of acids/bases, the impact of the catalyst types and solution pH value on the microstructure of the aerogel were discussed. Then, while the interaction mechanism of surfactants was analyzed, how the types and the amount of surfactants influence the microstructure was elucidated. Further, the role of additives, such as carbon nanotubes, graphene oxide, chitosan, salts, etc., was discussed. The effects of different drying methods i.e., supercritical drying, freeze-drying and ambient pressure drying, on the microstructure of the aerogel were compared, with an emphasis on the prerequisites and principles for ambient pressure drying. Finally, the current challenges were summarized and the possible future developments of resorcinol-formaldehyde polymer/carbon aerogel were prospected, such as improvement of mechanical properties, cost-effective, super elastic aerogel and 3D printable aerogel.
|
Published: 25 June 2022
Online: 2022-06-24
|
|
Fund:National Natural Science Foundation of China (51673003) and the Beijing Great Wall Scholars Incubator Program (CTT&TCD20180321). |
|
|
1 Hu L, He R J, Lei H S, et al. International Journal of Thermophysics, 2019, 40(4), 39. 2 Brilliantova I S, Lebedev I V, Gordienko M G, et al. Russian Journal of Physical Chemistry B, 2019, 13(7), 1174. 3 Nagy B, Geissler E, László K. Microporous and Mesoporous Materials, 2020, 294, 109888. 4 Noroozi M, Panahi-Sarmad M, Abrisham M, et al. ACS Applied Energy Materials, 2019, 2(8), 5319. 5 Pekala R W. Journal of Materials Science, 1989, 24, 3221. 6 Alonso-Buenaposada I D, Rey-Raap N, Calvo E G, et al. Journal of Sol-Gel Science and Technology, 2017, 84(1), 60. 7 Enterría M, Figueiredo J L. Carbon, 2016, 108, 79. 8 Arenillas A, Menéndez J A, Reichenauer G, et al. In: Organic and carbon gels, Aegerter M A, Prassas M, ed., Springer, Switzerland, 2019, pp. 1. 9 Kinnertová E, Slovák V. Journal of Thermal Analysis and Calorimetry, 2018, 134(2), 1215. 10 Elkhatat A M, Al-Muhtaseb S A. Advanced Materials, 2011, 23(26), 2887. 11 Calvo E G, Menéndez J A, Arenillas A. Journal of Non-Crystalline Solids, 2016, 452, 286. 12 Wu D C, Fu R W, Zhang S T, et al. Journal of Non-Crystalline Solids, 2004, 336(1), 26. 13 Tannert R, Schwan M, Ratke L. The Journal of Supercritical Fluids, 2015, 106, 57. 14 Molina-Campos D F, Fonseca-Correa R A, Vargas-Delgadillo D P, et al. Data in Brief, 2017, 12, 409. 15 Berthon S, Barbieri O, Ehrburger-Dolle F, et al. Journal of Non-Crystalline Solids, 2001, 285, 154. 16 Xu Y L, Yan M F, Wang S S, et al. Journal of Porous Materials, 2017, 24(5), 1375. 17 Yan M F, Zhang L H, He R, et al. Journal of Porous Materials, 2015, 22(3), 699. 18 Liu H, Saffaripour M, Mellin P, et al. Energy, 2014, 77, 352. 19 Al-Muhtaseb S A, Ritter J A. Advanced Materials, 2003, 15(2), 101. 20 Yang I, Kim S G, Kwon S H, et al. Electrochimica Acta, 2017, 223, 21. 21 Alshrah M, Tran M P, Gong P J, et al. Journal of Colloid And Interface Science, 2017, 485, 65. 22 Abbas Q, Mirzaeian M, Ogwu A A. International Journal of Hydrogen Energy, 2017, 42(40), 25588. 23 Taylor S J, Haw M D, Sefcik J, et al. Langmuir, 2014, 30(34), 10231. 24 Yang Z, Li J, Xu X J, et al. Journal of Materials Science & Technology, 2020, 50, 66. 25 Kinnertová E, Slovák V. Thermochimica Acta, 2018, 660, 37. 26 Nagy B, Bakos I, Geissler E, et al. Materials, 2019, 12(24), 4208. 27 Tamborini L H, Casco M E, Militello M P, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2016, 509, 449. 28 Lee K T, Oh S M. Chemical Communications, 2002, 22, 2722. 29 Balach J, Tamborini L, Sapag K, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2012, 415, 343. 30 Yang X Q, Huang H, Zhang G Q, et al. Materials Chemistry and Phy-sics, 2015, 149-150, 657. 31 Shen T H, Wu X L, Zhang Z H. Journal of Sol-Gel Science and Technology, 2017, 83(1), 81. 32 Liu Q, He P P, Qian X C, et al. Zeitschrift für Anorganische und Allgemeine Chemie, 2018, 644(3), 155. 33 Rey-Raap N, Rodríguez-Sanchez S, Alonso-Buenaposada I D, et al. Microporous and Mesoporous Materials, 2015, 217, 39. 34 Bruno M M, Cotella N G, Miras M C,et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2010, 362(1-3), 28. 35 Wu D C, Fu R W, Dresselhaus M S, et al. Carbon, 2006, 44(4), 675. 36 Haghgoo M, Yousefi A A, Mehr M J Z. Iranian Polymer Journal, 2012, 21(4), 211. 37 Wang S S, Xu Y L, Yan M F, et al. Journal of Non-Crystalline Solids, 2018, 499, 101. 38 Hasegawa G, Yano T, Akamatsu H, et al. Journal of Sol-Gel Science and Technology, 2020, 95, 801. 39 Libbrecht W, Verberckmoes A, Thybaut J W. Langmuir the Acs Journal of Surfaces & Colloids, 2017, 33(27), 6769. 40 Liu D, Hu Y Y, Zeng C, et al. Acta Physico-Chimica Sinica, 2016, 32(12), 2826(in Chinese). 刘丹, 胡艳艳, 曾超, 等. 物理化学学报, 2016, 32(12), 2826. 41 Zhang F Q, Meng Y, Gu D. Chemistry of Materials, 2006, 18, 5279. 42 Mohammaddokht H, Mahdizadeh S M, Khodeir E, et al. Materials Research Express, 2019, 6(9), 095010. 43 Haghgoo M, Yousefi A A, Mehr M J Z, et al. Microporous and Mesoporous Materials, 2014, 184, 97. 44 Chen L, Deng J Q, Song Y D, et al. ChemElectroChem, 2019, 6(22), 5750. 45 Haghgoo M, Yousefi A A, Mehr M J Z, et al. Journal of Materials Science, 2015, 50(18), 6007. 46 Hoffmann H. Advances in Colloid and Interface Science, 2012, 178, 21. 47 Guo K, Song H H, Chen X H, et al. Physical Chemistry Chemical Physics: PCCP, 2014, 16(23), 11603. 48 Canal-Rodríguez M, Arenillas A, Rey-Raap N, et al. Carbon, 2017, 118, 291. 49 Wang X, Lu L L, Yu Z L, et al. Angewandte Chemie, 2015, 54(8), 2397. 50 Yu Z L, Wu Z Y, Xin S, et al. Chemistry of Materials, 2014, 26(24), 6915. 51 Awadallah F A, Al-Muhtaseb S A. Applied Sciences, 2019, 9(21), 4582. 52 Awadallah F A, Al-Muhtaseb S A. Materials, 2019, 12(23), 3847. 53 Yu Z L, Li G C, Fechler N, et al. Angewandte Chemie International Edition, 2016, 55(47), 14623. 54 Wang X, Zhang M Q, Kou R, et al. Advanced Functional Materials, 2016, 26(28), 5086. 55 Xu J, Xin S, Liu J W, et al. Advanced Functional Materials, 2016, 26(21), 3580. 56 Zhang B X, Zhang Y B, Li J Y, et al. Cellulose, 2020, 27(9), 5029. 57 Xu Y L, Wang S S, Yan M F, et al. Journal of Porous Materials, 2018, 25(5), 1505. 58 Kistler S S. The Journal of Physical Chemistry, 1932, 36(1), 52. 59 Czakkel O, Marthi K, Geissler E, et al. Microporous and Mesoporous Materials, 2005, 86(1-3), 124. 60 Dervin S, Pillai S C. In:Sol-gel materials for energy, environment and electronic applications, Pillai S C, Hehir S, ed. Springer, Ireland, 2017, pp, 1. 61 El-Naggar M E. International Journal of Biological Macromolecules, 2020, 145, 1115. 62 Zhang H Y, Liu C J, Chen L, et al. Chemical Engineering Science, 2019, 201, 50. 63 Wang W L, Fang Y, Ni X W, et al. Carbohydrate Polymers, 2019, 224, 115129. 64 Chavhan M P, Ganguly S. Materials Technology, 2017, 32(12), 744. 65 Minović T Z, Gulicovski J J, Stoiljković M M, et al. Microporous and Mesoporous Materials, 2015, 201, 271. 66 Wu D C, Fu R W. Journal of Porous Materials, 2007, 15(1), 29. 67 İahin, Yaprak Özbakır, Zeynep İnönü, et al. Gels, 2018, 4(1), 3. 68 Chavhan M P, Ganguly S. Journal of Sol-Gel Science and Technology, 2018, 88(2), 395. 69 Scherer G W. Journal of the American Ceramic Society, 1990, 73(1), 3. 70 Zapata-Benabithe Z, Moreno-Castilla C, Carrasco-Marín F. Journal of Sol-Gel Science and Technology, 2015, 75(2), 407. 71 Zhao S Y, Siqueira G, Drdova S, et al. Nature, 2020, 584(7821), 387. 72 Jiang Y Q, Xu Z, Huang T Q, et al. Advanced Functional Materials, 2018, 28(16), 170702. |
|
|
|