INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
Colloidal Molding Technologies of Advanced Ceramics and Its Industrial Applications |
XI Xiaoqian1, ZHANG Le1,2, YAO Qing3, YUAN Mingxing1, LIU Mingyuan1, SHAO Cen2, CHEN Hao1,2
|
1 Jiangsu Key Laboratory of Advanced Laser Materials and Devices, School of Physics and Electronic Engineering, Jiangsu Normal University, Xuzhou 221116, Jiangsu, China 2 Jiangsu Xiyi Advanced Materials Research Institute of Industrial Technology, Xuzhou 221400, Jiangsu, China 3 School of Mechanical Engineering, Nantong University, Nantong 226019, Jiangsu, China |
|
|
Abstract Advanced ceramics have been widely used in laser, electronics, medical, aerospace, new energy as well as strategic industry fields due to their excellent optical, electrical, mechanical and biological properties. With the rapid development of the advanced ceramics industry, higher requirements are put forward for their forming quality. The aqueous colloidal forming technology can be used to form various kinds of complex shape ceramics in near net size. Moreover, using water as solvent and adding less organic matter can effectively shorten the rubber removal time, reduce the production cost, and obtain the remarkable environmental protection effect. In this paper, several typical aqueous colloidal forming technologies were introduced in detail. The key technical problems in the colloidal forming process were mainly analyzed and their corresponding solutions were given. Besides, its application in emerging industries was introduced. Lastly, its development trend was forecasted.
|
Published: 25 June 2022
Online: 2022-06-24
|
|
Fund:National Natural Science Foundation of China (61975070, 51902143, 61971207), Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD), Key Research and Development Project of Jiangsu Province (BE2019033, BE2018062), Postgraduate Research & Practice Innovation Program of Jiangsu Province (KYCX20_2336, KYCX20_2212), Natural Science Foundation of Jiangsu Province (BK20191467), International S & T Cooperation Program of Jiangsu Province (BZ2020045, BZ2020030, BZ2019063),Natural Science Fund for Colleges and Universities in Jiangsu Province(20KJA430003, 19KJB430018),Special Project for Technology Innovation of Xuzhou City (KC19250, KC20201, KC20244) and Open Project of State Key Laboratory of New Electronic Components and Key Materials and Technology (FHR-JS-202011017). |
|
|
1 Saini D S, Ghosh A, Tripathy S, et al. Scientific Reports, 2020, 10(1), 1. 2 Li T, Heenan T M M, Rabuni M F, et al. Nature Communications, 2019, 10(1), 1. 3 Chen J, Yang F, Gao X E, et al. Material Reports A: Review Papers, 2014, 28(1), 250(in Chinese). 陈晶, 杨付, 高宪娥, 等. 材料导报:综述篇, 2014, 28(1), 250. 4 Sun X L, Gong Q J, Liang Y X, et al. Material Reports A: Review Papers, 2020, 10(12), 11 (in Chinese). 孙晓玲, 弓巧娟, 梁云霞, 等. 材料导报:综述篇, 2020, 10(12), 11. 5 Chen F, Zhu H, Wu J M, et al. Ceramics International, 2020, 46(8, Part A), 11268. 6 Chen J, Wang Y, Pei X, et al. Ceramics International, 2020, 46(9), 13066. 7 Nie Y M. Journal of Chongqing University of Technology (Natural Science), 2017, 3(31), 128 (in Chinese). 聂喻梅. 重庆理工大学学报(自然科学版), 2017, 3(31), 128 8 Yuan M X, Zhou T Y, Zhou W, et al. Chinese Journal of Luminescence, 2021, 42(19), 10 (in Chinese). 袁明星, 周天元, 周伟, 等. 发光学报, 2021, 42(19), 10. 9 Ma Y L, Zhang L, Zhou T Y, et al. Journal of Materials Chemistry, 2020, 8(13),4281. 10 Li J, Li W Y, Liu X, et al. Chinese Journal of Luminescence, 2021,42(5), 580 (in Chinese). 李江, 李万圆, 刘欣, 等. 发光学报, 2021, 42(5),580. 11 Kim E H, Choi H H, Jung Y G. Journal of Manufacturing Processes, 2020, 53, 43. 12 Toci G, Pirri A, Patrizi B, et al. Optical Materials, 2018, 83, 182. 13 Ji B, Alrayes A A, Zhao J, et al. Advances Applied Ceramics, 2019, 118(1-2), 46. 14 Li K, Wang H, Liu X, et al. Journal of the European Ceramic Society, 2017, 37(13), 4229. 15 Gao P, Zhang L, Yao Q, et al. Journal of the European Ceramic Society, 2021, 41(8), 4598. 16 Kluczowski R, Krauz M, Kawalec M, et al. Journal of Power Sources, 2014, 268, 752. 17 Mamalis A G. Journal of Materials Processing Technology, 2001, 108(2), 126. 18 Schwarzer E, Olawsky L, Hagen F, et al. Journal of the European Cera-mic Society, 2019, 39(15), 4911. 19 Dhara S, Kamboj R K, Pradhan M, et al. Bulletin of Materials Science, 2002, 25(6), 565. 20 Jian G, Tai Q, Jian Y, et al. Ceramics International, 2012, 38(4), 2905. 21 Ba X, Li J, Zeng Y, et al. Ceramics International, 2013, 39(4), 4639. 22 Parisotto E I B, Teleken J T, Laurindo J B, et al. Dry Technol, 2020, 38(8), 1024. 23 Young A C, Omatete O O, Janney M A, et al. Journal of the American Ceramic Society, 1991, 74(3), 612. 24 Zhou C L, Jiang B, Fan J, et al. Ceramics International, 2016, 42(1), 1648. 25 Cheng S, Gong J H, Zhang Z T. Rare Metal Materials and Engineering, 2003, 32, 307. 26 Xiang J H, Xie Z P, Huang Y. Ceramics International, 2002, 28(1), 17. 27 Xiang J H, Huang Y, Xie Z P. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2002, 323(1-2), 336. 28 Chen F, Wu J M, Wu H Q, et al. International Journal of Lightweight Materials and Manufacture, 2018, 1(4), 239. 29 Han S H, Lee J, Lee K M, et al. Journal of the Mechanical Behavior of Biomedical Materials, 2020, 108,103782. 30 Dubok V, Shynkaruk A, Atamanenko O, et al. Materials Science and Engineering: B, 2010, 169(1-3), 145. 31 Yao Q, Zhang L, Chen H, et al. Ceramics International, 2021, 47(3), 4327. 32 Gao P, Zhang L, Yao Q, et al. Ceramics International, 2020, 46(2), 2365. 33 Zhao F, Qi J, Lu T. Journal of the European Ceramic Society, 2020, 40(4), 1168. 34 Cai K, Huang Y, Yang J. Journal of the European Ceramic Society, 2005, 25(7), 1089. 35 Xie Z P, Huang Y, Chen Y L, et al. Journal Materials Science Letters, 2001, 20(13), 1255. 36 Yin S, Pan L, Guo L, et al. Ceramics International, 2018, 44(7), 7569. 37 Ndinisa S S, Whitefield D J, Sigalas I. Ceramics International, 2020, 46(3), 3177. 38 Lu Y, Liu J, Ren B, et al. Ceramics International, 2020, 46(8), 11432. 39 Yao Q, Zhang L, Gao P, et al. Journal of the American Ceramic Society, 2020, 103(6), 3513. 40 Freitas A K, Puton B M S, Peres A P D S, et al. International Journal of Applied Ceramic Technology, 2020, 17(1), 320. 41 Zhao H, Tang F, Xie Y, et al. International Journal of Applied Ceramic Technology, 2020, 17(3), 1255. 42 Zhou J, Ma Z, Zhang L, et al. International Journal of Hydrogen Energy, 2019, 44(54), 28939. 43 Belon R, Boulesteix R, Geffroy P M, et al. Journal of the European Ceramic Society, 2019, 39(6), 2161. 44 Sharma P K, Varadan V V, Varadan V K. Smart Materials & Structures, 2003, 12(5), 749. 45 Chen X, Wu Y. Optical Materials, 2019, 89, 316. 46 Luo J, Eitel R. Ceramics International, 2018, 44(3), 3488. 47 Krishnan P P R, Vijayan S, Wilson P, et al. Ceramics International, 2019, 45(15), 18543. 48 Wang C C, Luo L H, Wu Y F, et al. Materials Letters, 2011, 65(14), 2251. 49 da Silva B A, de Oliveira V S G, Di Luccio M, et al. Ceramics International, 2020, 46(10), 16096. 50 Xiang J H, Huang Y. Material Reports, 2000(Z10), 105 (in Chinese). 向军辉, 黄勇. 材料导报, 2000(Z10), 105. 51 Stastny P, Chlup Z, Trunec M. Journal of the European Ceramic Society, 2020, 40(7), 2542. 20090063-852 Dong B, Yang M, Wang F, et al. Chemical Engineering Journal, 2019, 370, 658. 53 Jabbari M, Bulatova R, Tok A I Y, et al. Materials Science and Enginee-ring: B, 2016, 212, 39. 54 Marie J, Bourret J, Geffroy P M, et al. Journal of the European Ceramic Society, 2017, 37(16), 5239. 55 Wäsche R, Steinborn G. Journal of the European Ceramic Society, 1997, 17(2), 421. 56 He R, Hu P, Zhang X, et al. Ceramics International, 2013, 39(3), 2267. 57 Ong B C, Leong Y K, Chen S B. Journal of Colloid & Interface Science, 2009, 337(1), 24. 58 Ding G, He R, Zhang K, et al. Ceramics International, 2020, 46(4), 4720. 59 FengQiu T, XiaoXian H, YuFeng Z, et al. Ceramics International, 2000, 26(1), 93. 60 de Hazan Y, Heinecke J, Weber A, et al. Journal of Colloid and Interface Science, 2009, 337(1), 66. 61 Xing Y Y, Wu H B, Liu X J, et al. Journal of Materials Processing Technology, 2019, 271, 172. 62 Yu J, Yang J, Yong H. Ceramics International, 2011, 37(5), 1435. 63 Ba X, Li J, Pan Y, et al. Journal of Alloys and Compounds, 2013, 577, 228. 64 Cui X M, Ouyang S X, Huang Y, et al. Bulletin of the Chinese Ceramic Society, 2004(2), 40 (in Chinese). 崔学民, 欧阳世翕, 黄勇, 等. 硅酸盐通报, 2004(2), 40. 65 Doreau F, Tarı G, Pagnoux C, et al. Journal of the European Ceramic Society, 1998, 18(4), 311. 66 Zeng X J, Liu W L. Advances in Applied Ceramics, 2016, 115(4), 1. 67 Spaniol K G, Caldas S C, Peres A P S, et al. Ceramics International, 2019, 45(9), 12417. 68 Kim D H, Lim K Y, Paik U, et al. Journal of the European Ceramic Society, 2004, 24(5), 733. 69 Huha M A, Lewis J A. Journal of the American Ceramic Society, 2000, 83(8), 1957. 70 Barati A, Kokabi M, Famili M H N. Journal of the European Ceramic Society, 2003, 23(13), 2265. 71 Wang X F, Peng C Q, Wang R C, et al. Transactions of Nonferrous Metals Society of China, 2015, 25(7), 2466. 72 Jabbari M, Esfahani M N. Chemical Engineering Research and Design, 2019, 152, 269. 73 Bauer C, Cima M, Dellert A, et al. Journal of the American Ceramic Society, 2009, 92(6), 1178. 74 Cheng Z,Ye F, Liu Y, et al. Journal of Advanced Ceramics, 2019, 8(3), 399. 75 Wu X, Liang X H, Zhang X F, et al. Journal of Advanced Ceramics, 2021, 10(2), 347. 76 Tang F, Cao Y, Huang J, et al. Journal of the European Ceramic Society, 2012, 32(16), 3995. 77 赵康, 李军, 汤玉斐. 中国专利, CN101289328, 2008. 78 Kim S, Jang I, Kim C, et al. International Journal of Hydrogen Energy, 2020, 45(20), 11834. 79 Liu D D. Application of aqueous slurry in the preparation of solid oxide fuel cell by grouting.Master’s Thesis, South China University of Technology, China, 2014. (in Chinese). 刘丹丹. 水系浆料在注浆成型制备固体氧化物燃料电池中的应用. 硕士学位论文, 华南理工大学, 2014. 80 Wang C C, Luo L H, Wu Y F, et al. Acta Silicate, 2012, 40(7), 941 (in Chinese). 王程程, 罗凌虹, 吴也凡, 等. 硅酸盐学报, 2012, 40(7), 941. 81 Abd El Ghany O S, Sherief A H. Future Dental Journal, 2016, 2(2), 55. 82 Li M, Zhang L, Zhang C, et al. Ceramics International, 2020, 46(15), 23427. 83 Luo X P. Journal of Dental Materials and Devices, 2016(1), 1 (in Chinese). 骆小平. 口腔材料器械杂志, 2016(1), 1. 84 Liu K, Zhang K, Bourell D L, et al. Ceramics International, 2018, 44(17), 21556. 85 Lee G, Carrillo M, Mckittrick J, et al. Additive Manufacturing, 2020, 33, 101. 86 Witek L, Alifarag A M, Tovar N, et al. Journal of Orthopaedic Research, 2019, 37(12), 2499. 87 Shi Y, Wang W. Materials Letters, 2020, 261, 127. |
|
|
|