METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Experimental Research on 2195 Al-Li Alloy Rheological Behavior and Forming Characteristics in Cryogenic |
HUANG Ke1,2, YI Youping1,2,3, HUANG Shiquan2,3, DONG Fei1,2, WANG Chenguang1,2
|
1 Light Alloy Research Institute, Central South University, Changsha 410083, China 2 State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China 3 School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China |
|
|
Abstract 2195 Al-Li alloy thin-walled parts are widely used in the aerospace field. Improving the formability of 2195 Al-Li alloy is the basis and prere-quisite for achieving high-performance forming and manufacturing. In this work, uniaxial tensile tests with different temperatures (298—77 K) and different strain rates (0.000 25—0.01 s-1) are used to study the effects of deformation temperature and strain rate on rheological law of 2195 Al-Li alloy at cryogenic temperature. The influence mechanism of deformation temperature on formability is analyzed by Erickson cupping experiment and the observation of fracture morphology. The results show that the elongation and tensile strength of the 2195 Al-Li alloy sample are increased by 78.11% and 71.13% respectively compared with room temperature when the deformation temperature is reduced from room temperature(298 K) to cryogenic temperature(77 K). And the Erichsen cupping index (IE) and maximum punch force increased by 19.2% and 51.4% compared with room temperature. At the same time, at cryogenic temperature, the work hardening rate of the material is higher than that at room temperature, and it has a larger stable plastic strain range, and the forming performance is significantly improved. Compared with room temperature, the size of the fracture dimples of the specimen decreases, the depth increases, and the distribution is more uniform. The fracture mode is a typical ductile fracture.
|
Published:
Online: 2022-02-10
|
|
Fund:National Natural Science Foundation of China (51875583) and the State Key Laboratory of High Performance Complex Manufacturing Foundation of China (ZZYJKT2018-03). |
|
|
1 Wu G H, Sun J W, Zhang L, et al. Nonferrous Metals Science and Engineering, 2019, 10(2), 31(in Chinese). 吴国华,孙江伟,张亮,等. 有色金属科学与工程, 2019, 10(2), 31. 2 Chen J. Civil Aircraft Design and Research, 2010(1), 39(in Chinese). 陈建. 民用飞机设计与研究, 2010(1), 39. 3 Yang F Q, Xiong H, Ren B F,et al. World Nonferrous Metals, 2018(22), 1(in Chinese). 杨富强,熊慧,任柏峰,等. 世界有色金属, 2018(22), 1. 4 Wu X L, Liu M, Zang J X,et al. Materials Reports, 2016, 30(S2), 571(in Chinese). 吴秀亮,刘铭,臧金鑫,等. 材料导报, 2016, 30(S2), 571. 5 Xu J J, Kang W, Dou C B, et al. Ordnance Material Science and Engineering, 2017, 40(3), 132(in Chinese). 徐进军,康唯,都昌兵,等. 兵器材料科学与工程, 2017, 40(3), 132. 6 Li H Y, Ou L, Zheng Z Q. Journal of Materials Engineering, 2005(10), 31(in Chinese). 李红英,欧玲,郑子樵. 材料工程, 2005(10), 31. 7 Hao S J, Lu Z, Li G A, et al. Materials Reports, 2019, 33(S2), 389(in Chinese). 郝时嘉,陆政,李国爱,等. 材料导报, 2019, 33(S2), 389. 8 Cheng W, Liu W,Yuan S. Materials Science and Engineering: A,2019, 759, 357. 9 Yuan S, Cheng W, Liu W, et al. Journal of Materials Processing Technology,2020, 284, 116743. 10 Schneider R, Grant R J, Sotirov N, et al. Materials & Design, 2015, 88, 659. 11 Sotirov N, Falkinger G, Grabner F,et al. Materials Today: Proceedings, 2015, 2, S113. 12 Grabner F, Österreicher J A, Gruber B, et al. Advanced Engineering Materials, 2019, 21(8),1900089. 13 Kumar M, Sotirov N, Grabner F, et al. Transactions of Nonferrous Metals Society of China,2017, 27(6), 1257. 14 Magalhães D C, Kliauga A M, Ferrante M, et al. In:7th International Conference on Nanomaterials by Severe Plastic Deformation. Sydney, 2017,pp. 012027. 15 Lee W,Lin C. Cryogenics (Guildford),2016, 79, 26. 16 Han D F, Zheng Z Q, Jiang N, et al. The Chinese Journal of Nonferrous Metals, 2004(12), 2090(in Chinese). 韩冬峰,郑子樵,蒋呐,等. 中国有色金属学报, 2004(12), 2090. 17 Li S Q, Deng Z H, Yang Q Y,et al. Rare Metal Materials and Enginee-ring, 2018, 47(2), 553(in Chinese). 李世清,邓赞辉,杨群英,等. 稀有金属材料与工程, 2018, 47(2), 553. 18 Li H, Zhan L, Huang M,et al. Journal of Alloys and Compounds,2021, 851, 156829. 19 Cheng W, Liu W, Fan X, et al. Materials Science and Engineering: A,2020, 790, 139707. 20 Jobba M, Mishra R K, Niewczas M. International Journal of Plasticity,2015, 65, 43. 21 Feng Z L, Chen Q W, Wang H T. Journal of Anhui University of Techno-logy (Natural Science), 2014, 31(1), 29(in Chinese). 冯泽林,陈其伟,王会廷. 安徽工业大学学报(自然科学版), 2014, 31(1), 29. 22 Wang Q L, Tang B T, Zheng E. China Mechanical Engineering, 2015, 26(14), 1978(in Chinese). 王巧玲,唐炳涛,郑伟. 中国机械工程, 2015, 26(14), 1978. 23 Jia B H, Song W D,Tang H P, et al. Rare Metal Materials and Enginee-ring, 2014, 43(9), 2157(in Chinese). 贾宝华,宋卫东,汤慧萍,等. 稀有金属材料与工程, 2014, 43(9), 2157. 24 Zhong Q P, Zhao Z H. Fractography, Higher Education Press, China, 2006,pp.54(in Chinese). 钟群鹏,赵子华.断口学,高等教育出版社,2006, pp.54. 25 Al-Haidary J T, Petch N J, De Los Ria ER. Philosophical Magazine A, 1983, 47(6),891. 26 Chen D, Chen Z H. Aerospace Materials Technology. 2000(4), 1(in Chinese). 陈鼎,陈振华. 宇航材料工艺, 2000(4), 1. 27 Dong F, Huang S, Yi Y, et al. Materials Science and Engineering: A, 2021, 809, 140971. 28 Lin Y T, Wang M C, Zhang Y, et al. Materials & Design, 2017, 113, 54. |
|
|
|