不锈钢基超疏水表面的研究现状及发展趋势

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (32985KB)
Export: BibTeX | EndNote (RIS)

Abstract With the increasing demand for the performance of stainless steel materials, the preparation of surface with special wettability on stainless steel substrate has become one of the research hotspots.This paper briefly introduces the related theories of superhydrophobic surface and summarized several methods to obtain superhydrophobic properties on stainless steel surface in recent years, such as electrodeposition, chemical deposition, hydrothermal method, etching method, sol-gel method, spraying method, etc. The advantages and limitations of different methods are discussed, and the existing problems and solutions of stainless steel-based superhydrophobic surface are presented. The development trend of stainless steel-based superhydrophobic surface towards multifunction, high stability, and greener environmental protection is prospected, hoping to provide reference for future research and development of stainless steel-based superhydrophobic surface.

Key words： stainless steel substrate superhydrophobicity preparation process mechanical stability self-healing

Published: 05 June 2022 Online: 2022-06-08

CLC number:

TB31

Fund:Jilin Provincial Development and Reform Commission (2021C039-5).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Xizhen
	SONG Yuanji
	YU Sirong
	WANG Kang
	WANG Jun

Cite this article:

YANG Xizhen,SONG Yuanji,YU Sirong, et al. Research Status and Development Trend of Superhydrophobic Surface on Stainless Steel[J]. Materials Reports, 2022, 36(Z1): 21120203-9.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2022/V36/IZ1/21120203

1 白鹤, 王伯健.特殊钢, 2009, 30(2), 30.
2 赵振业, 李春志, 李志, 等.中国有色金属学报, 2004, 14(S1), 202.
3 Wang Y, Tang Z, Lu S, et al. Holzforschung, 2020, 74(8), 799.
4 陈和平, 郭乐凡, 曾跃兵, 等.纺织科学与工程学报, 2021, 38(3), 30.
5 Li X, Yin S, Huang S, et al. Vacuum, 2020, 173, 109172.
6 Chen J, Chen J, Li L, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2021, 630, 127552.
7 Wang C, Guo J, Yu H, et al. Ceramics International, 2021, 47(22), 32456.
8 翟广坤, 李曙林, 陈素素, 等.工程科学学报, 2018, 40(7), 864.
9 王军军, 王贤明, 吴连锋, 等.化学通报, 2021, 84(6), 515.
10 冯放, 沈虎, 赵宏伟, 等.工程热物理学报, 2021, 42(5), 1168.
11 王霞, 王辉, 侯丽, 等.材料工程, 2020, 48(6), 73.
12 Qian H, Xu D, Du C, et al. Journal of Materials Chemistry A, 2017, 5(5), 2355.
13 Zang D, Zhu R, Wu C, et al. Scripta Materialia, 2013, 69(8), 614.
14 任刘珍, 胡海豹, 宋保维, 等.数字海洋与水下攻防, 2021, 3(3), 204.
15 赵一鸣, 汪怀远, 陶瑞丰, 等.化学工程师, 2018, 32(3), 33.
16 王争闯, 张芳芳, 张亚楠, 等.平顶山学院学报, 2013, 28(5), 61.
17 Callies M, Quere D. Soft Matter, 2005, 1(1), 55.
18 Barthlott W, Neinhuis C. Planta, 1997, 202(1), 1.
19 Guo Z, Zhou F, Hao J, et al. Journal of Colloid and Interface Science, 2006, 303(1), 298.
20 刘双平, 俞熹.大学物理, 2011, 30(9), 50.
21 高雪峰, 江雷.物理, 2006, 35(7), 559.
22 胡锦辉. 316L 不锈钢超疏水表面的制备及性能研究.硕士学位论文, 中国石油大学(华东), 2019.
23 Young T III. Philosophical Transactions of the Royal Society of London, 1805, 95, 65.
24 Kijlstra J, Reihs K. Colloids and Surfaces A, Physicochemical and Engineering Aspects, 2002, 206(1-3), 521.
25 Wenzel R N. Industrial & Engineering Chemistry, 1936, 28(8), 988.
26 Cassie A B D, Baxter S. Transactions of the Faraday Society, 1944, 40, 546.
27 Patankar N A. Langmuir, 2004, 20(19), 8209.
28 Liu T, Yin Y, Chen S, et al. Electrochimica Acta, 2007, 52(11), 3709.
29 Bartell F E, Shepard J W. The Journal of Physical Chemistry, 1953, 57(2), 211.
30 蒋斌, 曾利兰, 梁涛, 等.中国腐蚀与防护学报, 2018, 38(5), 438.
31 周通, 陈晶晶, 涂春朝, 等.化工学报, 2021, 72(7), 3814.
32 Isimjan T T, Wang T, Rohani S. Chemical Engineering Journal, 2012, 210, 182.
33 Huang L, Song J, Lu Y, et al. Micro & Nano Letters, 2017, 12(2), 76.
34 Laudise R A, Nielsen J W. Solid State Physics, 1961, 12, 149.
35 徐姝颖, 赵莹莹, 宋秋实, 等.人工晶体学报, 2018, 47(8),1560.
36 Wang K, Yu S, Yin X, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2021, 633, 127871.
37 Garcia-Giron A, Romano J M, Liang Y, et al. Applied Surface Science, 2018, 439, 516.
38 Kim J H, Mirzaei A, Kim H W, et al. Applied Surface Science, 2018, 439, 598.
39 Fu T, Wen C S, Lu J, et al. Vacuum, 2012, 86(9), 1402.
40 尹成勇, 李澄, 彭晓燕, 等. 中国腐蚀与防护学报, 2014, 34(3), 257.
41 余俊. 超疏水不锈钢网的制备及其油水分离的应用研究.硕士学位论文, 武汉工程大学, 2018.
42 刘涛. 不锈钢超疏水表面制备及其防冰性能研究.硕士学位论文, 南昌航空大学, 2017.
43 Guo D, Hou K, Xu S, et al. Journal of Materials Science, 2018, 53(9), 6403.
44 Li H, Yu S, Han X. Chemical Engineering Journal, 2016, 283, 1443.
45 Lee M W, An S, Latthe S S, et al. ACS Applied Materials & Interfaces, 2013, 5(21), 10597.
46 田光远. 铝基与不锈钢基超疏水表面制备技术研究.硕士学位论文, 哈尔滨工业大学, 2014.
47 赵欢. 不锈钢超疏水性表面的制备及性能研究.硕士学位论文, 山东科技大学, 2017.
48 Tang Y, Yang J, Yin L, et al. Colloids and Surfaces A:Physicochemical and Engineering Aspects, 2014, 459, 261.
49 Yin X, Yu S, Wang K, et al. Chemical Engineering Journal, 2020, 394, 124925.
50 Yin X, Yu S, Wang L, et al. Separation and Purification Technology, 2020, 234, 116126.
51 盛宇, 徐丽慧, 孟云, 等.纺织学报, 2019, 40(7), 90.
52 Wu W, Wang X, Liu X, et al. ACS Applied Materials & Interfaces, 2009, 1(8), 1656.
53 Zhang L, Xue C H, Cao M, et al. Chemical Engineering Journal, 2017, 320, 244.