METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Catalytic Performance of Amorphous Alloy in Wastewater Treatment |
PEI Liefei1,2, ZHANG Xiangyun1, YUAN Zizhou1
|
1 School of Materials Science and Engineering, Lanzhou University of Technology , Lanzhou 730050, China 2 School of Mining and Metallurgical Engineering, Baiyin Mining and Metallurgical Vocational and Technical College, Baiyin 730900, Gansu, China |
|
|
Abstract With the development of printing and dyeing industry, the discharge of dye wastewater has become one of the main sources of water pollution. At present, the commonly used degradation agent zero-valent iron (ZVI) has a serious surface passivation phenomenon and a single type of active center, which leads to its low degradation efficiency of dyes. Therefore, there is an urgent need to develop new biodegradable materials with high reaction activity and good recycling as a substitute for ZVI. The amorphous alloy (MGs) with thermodynamic metastable structure becomes more and more important in the field of catalytic reaction because of its excellent catalytic activity. The results show that MGs has ultra-high degradation efficiency, low metal leaching rate and stable catalytic performance in the treatment of dye wastewater. This paper briefly describes the current pollution status and treatment methods of dye wastewater, and focuses on the research progress of Fe-based, Mg-based and other amorphous alloys as environmental catalysts for the degradation of azo dyes. The properties of decolorization, mineralization, metal lea-ching, persistence and reusability in degradation are systematically reviewed. Compared with ZVI and crystalline alloys, the unique physical structure and properties lead to the decrease of activation energy, the increase of apparent reaction rate constant, the downward shift of valence band top, the decrease of redox potential and the shedding of product layer in the reaction with dyes. Compared with other traditional processing me-thods, it is found that the performance advantage of MGs is obvious. However, there are still some problems in engineering applications, such as poor amorphous forming ability, secondary environmental pollution caused by metal leaching and so on. For this reason, this paper puts forward some suggestions for the further development and application of MGs catalyst. (1) Compounding with other highly conductive substances (such as biochar) can reduce the amount of catalyst and improve the ability of electron transport at the same time. (2) The theoretical relationship between amorphous, electronic structure and catalytic performance should be established. (3) Its application scope should be extended to the treatment of petrochemical wastewater, pharmaceutical wastewater, heavy metal wastewater and other polluted wastewater. It is expected to provide more new references for MGs in the field of environmental pollutant degradation.
|
Published: 25 January 2022
Online: 2022-01-26
|
|
Fund:National Natural Science Foundation of China (51661015,52061024), the Innovation Fund Project of Education Department of Gansu Province (2021B-553) and the Natural Science Foundation of Zhejiang Province ( LQ20E010002). |
|
|
1 Chen Z L, Dong Y C, Wang P, et al. Materials Reports B:Research Papers, 2016, 30(7), 34 (in Chinese). 陈震雷, 董永春, 王鹏, 等.材料导报:研究篇, 2016, 30(7), 34. 2 Yang Q X, Jia Z J, Pan F, et al. Techniques and Equipment for Environmental Pollution Control, 2005, 1(2), 1 (in Chinese). 杨清香, 贾振杰, 潘峰, 等.环境污染治理技术与设备. 2005, 1(2), 1. 3 Wang Y Z, Chen M X , Hu C, et al. Acta Entiae Circumstantiae, 2000, 20(6), 772(in Chinese). 王怡中, 陈梅雪,胡春, 等. 环境科学学报, 2000, 20(6), 772. 4 Tang Y, Shao Y, Chen N, et al. RSC Advances, 2015, 5(43), 34032. 5 Ajaz M, Elahi A, Rehman A. Journal of Water Reuse and Desalination, 2018, 8(4), 507. 6 Kong Q, Wang X, Lou T. Carbohydrate Polymers, 2020, DOI: 10.1016/j.carbpol.2020.116481 7 Liu M H, He Q Y, Zhang K F, et al. Journal of Hazardous Materials, 2020, DOI: 10.1016/j.jhazmat.2020.122582. 8 Lyu Z W, Yan Y Q, Yuan C C, et al. Materials & Design, 2020, DOI: 10.1016/j.matdes.2020.108876. 9 Shokrollahzadeh S, Abassi M, Ranjbar M, et al. Environmental Enginee-ring Research, 2018, 24(3), 513. 10 Tang Y, He D, Guo Y, et al. Chemosphere, 2020, DOI: 10.1016/j.chemosphere.2020.127368. 11 Yang X, Gu W, Ma Y, et al. Colloids and Surfaces A Physicochemical and Engineering Aspects, 2020, DOI: 10.1016/j.colsurfa.2020.124748. 12 Rodrigues C S D, Madeira L M, Boaventura R A R. Environmental Technology, 2013, 34(5-8), 719. 13 Khataee A R, Pons M N, Zahraa O. Journal of Hazardous Materials, 2009, 168(1), 451. 14 Wu Y, Peng K. JOM, 2018, 70(6), 861. 15 Chen Q, Yan Z, Guo L, et al. Journal of Alloys and Compounds, 2020, DOI: 10.1016/j.jallcom.2020.154817. 16 Tang Y, Shao Y, Chen N, et al. RSC Advances, 2014, 5(8), 6215. 17 Zhang C, Zhang H, Lv M, et al. Journal of Non-crystalline Solids, 2010, 356(33), 1703. 18 Zeng D, Dan Z, Qin F, et al. Materials Chemistry and Physics, 2020, DOI: 10.1016/j.matchemphys.2019.122307. 19 Chen S, Yang G, Luo S, et al. Journal of Materials Chemistry A, 2017, 5(27), 14230. 20 Wang X, Pan Y, Zhu Z, et al. Chemosphere, 2014, 117, 638. 21 Jia Z, Liang S X, Zhang W C, et al. Journal of the Taiwan Institute of Chemical Engineers, 2017, 71, 129. 22 Luo X, Li R, Zong J, et al. Applied Surface Science, 2014, 305, 314. 23 Zhang C, Zhu Z, Zhang H. Results in Physics, 2017, 7, 2054. 24 Jia Z, Wang Q, Sun L, et al. Advanced Functional Materials, 2019, 29(19), 18078571. 25 Zhang C, Zhu Z, Zhang H, et al. Journal of Non-Crystalline Solids, 2012, 358(1), 61. 26 Zhang C, Zhu Z, Zhang H, et al. Science Bulletin, 2011, 56(36), 3988. 27 Wang Q , Chen M , Lin P , et al. Journal of Materials Chemistry A, 2018, 6(23), 10686. 28 Gong D, Li H Y, Liu H Y, et al. Journal of Safety and Environment, 2013, 38(1), 21. 29 Monath T, Levenbook I, Soike K, et al. Journal of Virology, 2000, 74(4), 1742. 30 Jia Z, Duan X, Zhang W C, et al. Scientific Reports, 2016, 6(1), 1. 31 Liang S, Jia Z, Zhang W, et al. Materials & Design, 2017, 119, 244. 32 Jia Z, Li X F , Liang S X,et al. Materials in Environmental Engineering, 2017, DOI: 10.1515/9783110516623-075. 33 Souza C A, May J E, Carlos I A, et al. Journal of Non-crystalline Solids, 2002, 304(1),210. 34 Baron A, Szewieczek D, Nawrat G, et al. Electrochimica Acta, 2007, 52(18), 5690. 35 Tong X, Wang G, Stachurski Z H, et al. Scientific Reports, 2016, 6(1), 1. 36 Chen J, Zhu L. Catalysis Today, 2007, 126(3-4), 463. 37 Wang J Q, Liu Y H, Chen M W, et al. Scientific Reports, 2012, 2(1), 1. 38 Miao F, Wang Q, Zeng Q, et al. Journal of Materials Science & Technology, 2020, 38, 107. 39 Wang X, Zhang Q, Liang S, et al. Catalysts, 2020, DOI: 10.3390/catal10010048. 40 Li Z K, Qin X D, Zhu Z W,et al. Journal of Materials Chemistry A, 2020, 8(27), 10855. 41 Yang W, Wang Q, Li W, et al. Materials & Design, 2019, 118, 136. 42 Weng N, Feng W,Qin F X, et al. Materials, 2017, DOI: 10.3390/ma10091001. 43 Zhang C Q, Zhu Z W, Zhang H F, et al. Journal of Environmental Sciences, 2012, 24(6), 1021. 44 Hu Y C, Wang Y Z, Su R, et al. Advanced Materials, 2016, 28(46), 10293. 45 Zhang C Q, Zhu Z W, Zhang H F, et al. Chinese Science Bulletin, 2011, 56(36), 3988. 46 Chen S Q, Dong L Z, Hui K Z, et al. Journal of Iron and Steel Research International, 2018, 25(6),608. 47 Chen S Q , Hui K Z , Dong L Z , et al. Science China Materials, 2020, 63(3), 453. 48 Das S, Garrison S, Mukherjee S, et al. Advanced Engineering Materials, 2016, 18(2), 214. 49 Xie S, Huang P, Kruzic J J, et al. DNA Repair, 2016, 6(1), 1. 50 Qin X, Li Z, Zhu Z, et al. Journal of Materials Science & Technology, 2017, 33(10), 1147. 51 Deng Z, Zhang X H, Chan K C, et al. Chemosphere, 2017, 174, 76. 52 Zhang X H, Zeng Y Q, Yin L, et al. Corrosion Science, 2018, 141, 109. 53 Si J, Gu J, Luan H, et al. Journal of Hazardous Materials, 2020, DOI: 10.1016/j.jhazmat.2020.122043. 54 Ji L, Peng S, Zheng Z G, et al. Journal of Alloys and Compounds, 2020, DOI: 10.1016/j.jallcom.2019.152347. 55 Dai T, Wang N. Journal of Superconductivity and Novel Magnetism, 2019, 32(11), 3699. 56 Zhang C, Zhang X, Zhang S, et al. Results in Physics, 2019, DOI: 10.1016/j.rinp.2019.102523. 57 Chen Q, Pang J, Yan Z C, et al. Journal of Non-Crystalline Solids, 2020, DOI: 10.1016/j.jnoncrysol.2019.119802. 58 Wu S, Pan Y, Lu J, et al. Journal of Materials Science & Technology, 2019, 35(8), 1629. 59 Chen P, Hu X M, Qi Y M, et al. Metals, 2017, 7(11), 485. 60 Zhao Y, Si J J, Song J G, et al. Materials Science and Engineering B-advanced Functional Solid-state Materials, 2014, 118, 46. 61 Ramya M, Karthika M, Selvakumar R,et al. Journal of Alloys & Compounds, 2016, 696, 185. 62 Qin X D, Zhu Z W, Liu G, et al. Scientific Reports, 2015, 55(1), 1. 63 Lv Z Y, Liu X J, Jia B, et al. Scientific Reports, 2016, 6(1), 1. 64 Wang P, Wang J, Li H, et al. Journal of Alloys and Compounds, 2017, 701, 759. 65 Zhang X, Liu J, Li J, et al. Applied Physics A, 2020, 126(4), 1. 66 Liang S X, Zhang W, Zhang L, et al. Sustainable Materials and Techno-logies, 2019, DOI: 10.1016/j.susmat.2019.e00126. 67 Wang P, Bian X F, Li Y X. Chinese Science Bulletin, 2012, 57(1), 33. 68 Zhang C, Zhang X, Zhang S, et al. Results in Physics, 2019, DOI: 10.1016/j.rinp.2019.102523. |
|
|
|