POLYMERS AND POLYMER MATRIX COMPOSITES |
|
|
|
|
|
Preparation, Adsorption-Degradation Properties of Cu2O-CuO/TiO2 Composite Chitosan/Maleic Anhydride/Divinylbenzene Porous Materials |
LIU Xiaolin1,2, ZHANG Yong3, ZHANG Lin1,2, LUO Xuan1
|
1 Research Center of Laser Fusion, China Academy of Engineering Physics, Mianyang 621000, Sichuan, China 2 Department of Physics, University of Science and Technology of China, Hefei 230000, China 3 Sichuan Co-Innovation Center for New Energetic Materials, Mianyang 621010, Sichuan, China |
|
|
Abstract In the ternary system of chitosan/maleic anhydride/divinylbenzene, Cu2O-CuO/TiO2 nanoparticles were introduced to prepare Cu2O-CuO/TiO2 composite chitosan/maleic anhydride/divinylbenzene porous organic polymer (CMD-Ti/Cu). The structural characterization and chemical composition of CMD-Ti/Cu polymers were characterized. The adsorption and degradation properties of methylene blue in the system of CMD-Ti/Cu/H2O2 were studied. These experiments revealed that Cu2O-CuO/TiO2 nanoparticles reacted with the amino groups of chitosan in the ternary system to prepare the porous organic polymer. When the mass of Cu2O-CuO/TiO2 nanoparticles was 50% of chitosan(CMD-Ti/Cu-3), the adsorption-degradation properties of the composite ternary system were the best. Besides, the removel rate of MB for CMD-Ti/Cu-3 was 98.8% under optimum conditions (i.e., 25 ℃,dosage of H2O2 0.15 mol·L-1, dosage of catalyst 1.0 g·L-1 and initial concentration of MB 50.0 mg·L-1). After five cycles, the removal rate of CMD-Ti/Cu-3 remained above 95%. Bestdes, the active component capture experiments showed that the active radicals of dye degradation mainly came from the hydroxyl radicals produced by H2O2.
|
Published: 13 January 2022
Online: 2022-01-13
|
|
Fund:This work was financially supported by Key Laboratory of Precision Manufacturing Technology of CAEP (ZD18001). |
|
|
[1] Kang Y G, Yoon H, Lee C S, et al. Water Research, 2019, 151, 413. [2] Lyu M, Yan L, Liu C, et al. Chemical Engineering Journal, 2018, 349, 791. [3] Beluci N C L, Mateus G A P, Miyashiro C S, et al. Science of the Total Environment, 2019, 664, 222. [4] Kim T W, Park M, Kim H Y, et al. Journal of Solid State Chemistry, 2016, 239, 91. [5] Liu Y, Zhang F, Zhu W, et al. Carbon, 2020, 160, 88. [6] Shojaat R, Saadatjoo N, Karimi A, et al. Journal of Environmental Chemical Engineering, 2016, 4(2), 1722. [7] Zheng X, Ruan Q, Jiang Q, et al. Journal of Colloid and Interface Science, 2018, 532, 1. [8] Liu G Z, Dong Y C, Li B, et al. Materials Reports A: Review Papers, 2018, 32(2), 888(in Chinese). 刘广增,董永春,李冰,等.材料导报:综述篇,2018,32(2),888. [9] Wang X, Chen J T, Zhang Q, et al. Journal of the Chinese Ceramic Society, 2018, 46(7), 1003(in Chinese). 王炫,陈俊涛,张谦,等.硅酸盐学报,2018,46(7),1003. [10] Chen P, Sun F, Wang W, et al. Journal of Alloys and Compounds, 2020, 834, 155220. [11] Chen Y, Yang Z, Liu Y, et al. Chemical Engineering Journal, 2020, 396, 125329. [12] Ghorai K, Panda A, Bhattacharjee M, et al. Applied Surface Science, 2021, 536, 147604. [13] Li R, Wu X N, Wang Q. et al. Water Purification Technology, 2019, 38(4), 70(in Chinese). 李蓉,吴小宁,王倩,等.净水技术,2019,38(4),70. [14] Zhao Y, Kang S, Qin L, et al. Chemical Engineering Journal, 2020, 379, 122322. [15] Trikkaliotis D G, Christoforidis A K, Mitropoulos A C, et al. Carbohydrate Polymers, 2020, 234, 115890. [16] Feng C, Ren P, Huo M, et al. Carbohydrate Polymers, 2020,241,116369. [17] Ajmal A, Majeed I, Malik R N, et al. Journal of Environmental Chemical Engineering, 2016, 4(2),2138. [18] Al-Kuhaili M F. Vacuum, 2008, 82(6), 623. [19] Rahimi B, Jafari N, Abdolahnejad A, et al. Journal of Environmental Chemical Engineering, 2019, 7(4), 103253. [20] Kumar R, Sharma R K, Singh A P. Journal of Environmental Chemical Engineering, 2018, 6(5), 6037. |
|
|
|