CFRP层合板抗分层损伤技术研究进展

doi:10.11896/j.issn.1005-023X.2018.13.020

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2116KB)
Export: BibTeX | EndNote (RIS)

Abstract Carbon fiber reinforced plastics (CFRP) are widely applied in high performance vehicles due to their excellent nature, namely, high specific strength and modulus, tailorable mechanical properties, fatigue and corrosion resistance, and dimensional stability. Among all the CFRP components, laminated structure are most widely applied. However, due to the lack of reinforcement fibers within the interlaminar zone, laminated CFRP are highly susceptive to delamination and low velocity impact damage. Based on this background , the research progress of laminated plate anti-delamination damage methods is reviewed in this paper, the applicability, advantages and disadvantages of these methods are compared and expounded, and the research progress of using carbon nanotubes (CNTs) to lift laminated plates against delamination damage is summarized. The properties and toughening mechanism of carbon nanotubes, the toughening methods and effects of carbon nanotubes are summarized, and the possibility of further improving interlaminar properties of carbon nanotubes is discussed.

Key words： laminate delamination interlaminar toughening carbon nanotube

Published: 01 August 2018

CLC number:

TB332

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HE Yonglyu
	ZHANG Jianwei
	HUANG Chunfang
	LIU Jun
	JIANG Dazhi
	JU Su

Cite this article:

HE Yonglyu,ZHANG Jianwei,HUANG Chunfang, et al. Progress of Anti-delamination Techniques for Laminated Composites[J]. Materials Reports, 2018, 32(13): 2288-2294.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.13.020 OR http://www.mater-rep.com/EN/Y2018/V32/I13/2288

1 Chen J, Takezono S, Nagata M, et al. Influence of stacking sequence on the damage growth in quasi-isotropic CFRP laminates[J].Journal of Mechanical Strength,2003,7(3):178.
2 Mittelstedt C, Becker W. Interlaminar stress concentrations in la-yered structures: Part I-A selective literature survey on the free-edge effect since 1967[J].Journal of Composite Materials,2004,38(12):1037.
3 Sihn S, Kim R Y, Kawabe K, et al. Experimental studies of thin-ply laminated composites[J].Composites Science and Technology,2007,67(6):996.
4 Tomohiro Yokozeki, Akiko Kuroda, Akinori Yoshimura. Damage characterization in thin-ply composite laminates under out-of-plane transverse loads[J]. Composite structures,2010,93:49.
5 Sasayama H, Kawabe K, Tomoda S, et al. Effect of lamina thickness on first ply failure in multi-directionally laminated composites[C]∥Proceedings of the 8th Japan International SAMPE Sympo-sium & Exhibition (JISSE-8). Tokyo,2003:142.
6 Guillamet G, Turon A, Costa J, et al. A quick procedure to predict free-edge delamination in thin-ply laminates under tension[J].Engineering Fracture Mechanics,2016,168:28.
7 Ivanov D S, Lomov S V, Bogdanovich A E, et al. A comparative study of tensile properties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites. Part 2: Comprehensive experimental results[J].Composites Part A Applied Science & Ma-nufacturing,2009,40(8):1144.
8 Khokar N. 3D Fabric-forming processes: Distinguishing between 2D-weaving, 3D-weaving and an unspecified non-interlacing process[J].Journal of the Textile Institute,1996,87(1):97.
9 Lomov S V, Bogdanovich A E, Ivanov D S, et al. A comparative study of tensile properties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites. Part 1: Materials, methods and principal results[J].Composites Part A Applied Science & Manufacturing,2009,40(8):1134.
10 Cheng X, Yang K, Hu R, et al. Tensile fatigue damage and its mechanism of stitched composite laminates[J].Chinese Journal of Theoretical and Applied Mechanics,2010,42(1):132(in Chinese).
程小全,杨琨,胡仁伟,等.缝合复合材料层合板拉伸疲劳损伤及其机理[J].力学学报,2010,42(1):132.
11 Bodyalo N N, Kogan A G. Fabrication of composite sewing thread using polyester microfibres[J].Fibre Chemistry,2005,37(2):154.
12 Saravanan R, Gopalakrishnan T, Jayakrishnamoorthy P. Experimental investigation of influence of sewing type-Z axis reinforcement on epoxy/glass fibre composite[J].Journal of Advances in Mechanical Engineering and Science,2016,2(2):20.
13 Cartié D D R, Troulis M, Partridge I K. Delamination of Z-pinned carbon fibre reinforced laminates[J].Composites Science & Techno-logy,2006,66(6):855.
14 Dai S C, Yan W, Liu H Y, et al. Experimental study on Z-pin bridging law by pullout test[J].Composites Science & Technology,2004,64(16):2451.
15 Jin T, Zhuo Z, Li B. A study on low-velocity impact damage of Z-pin reinforced laminates[J].Journal of Mechanical Science and Technology,2007,21(12):2125.
16 Vaidya U K, Kamath M V, Hosur M V, et al. Low-velocity impact response of cross-ply laminated sandwich composites with hollow and foam-filled Z-pin reinforced core[J].Journal of Composites Technology & Research,1999,21(2):84.
17 Zhang X, Hounslow L, Grassi M. Improvement of low-velocity impact and compression-after-impact performance by Z-fibre pinning[J].Composites Science & Technology,2006,66(15):2785.
18 Mouritz A P. Review of Z-pinned composite laminates[J].Composites Part A Applied Science & Manufacturing,2007,38(12):2383.
19 Mittelstedt C, Becker W. Free-edge effects in composite laminates[J].Applied Mechanics Review,2007,60(5):217.
20 Chan W S, Ochoa O O. Edge delamination resistance by a crictical ply termination[J].Key Engineering Materials,1991,37:285.
21 Howard W E, Gossard T, Jones R M. Composite laminate free-edge reinforcement with U-shaped caps. Part Ⅰ-Stress analysis[J].Aiaa Journal,1989,27(5):610.
22 Dong H, Yi X, An X, et al. Development of interleaved fiber-reinforced polymer matrix composite[J].Acta Materiae Compositae Sinica,2014,31(2):273(in Chinese).
董慧民,益小苏,安学锋,等.纤维增强热固性聚合物基复合材料层间增韧研究进展[J].复合材料学报,2014,31(2):273.
23 Hsiao H, Ni C, Wu M, et al. A novel optical technique for observation of global particle distribution in toughened composites[J].Composites Part A Applied Science and Manufacturing,2012,43(9):1523.
24 Zhang J, Yang T, Lin T, et al. Phase morphology of nanofibre interlayer: Critical factor for toughening carbon/epoxy composites[J].Composites Science and Technology,2012,72(2):256.
25 Yun N, Won Y, Kim S. Toughening of carbon fiber/epoxy compo-site by inserting polysulfone film to form morphology spectrum[J].Polymer,2004,45(20):6953.
26 Jiao G, Ning R, Lu Z, et al. A study on interleaved composites[J].Aerospace Materials & Technology,2001,31(4):36(in Chinese).
矫桂琼,宁荣昌,卢智先,等.层间增韧复合材料研究[J].宇航材料工艺,2001,31(4):36.
27 Zhang M, An X, Tang B, et al. Phase structure of a toughened epoxy system[J].Acta Materiae Compositae Sinica,2007,24(1):13(in Chinese).
张明,安学锋,唐邦铭,等.增韧环氧树脂相结构[J].复合材料学报,2007,24(1):13.
28 Thostenson E T, Li C, Chou T W. Nanocomposites in context[J].Composites Science & Technology,2005,65(3-4):491.
29 Thostenson E T, Ren Z, Chou T W. Advances in the science and technology of carbon nanotubes and their composites: A review[J].Composites Science & Technology,2001,61(13):1899.
30 Yu M F, Lourie O, Dyer M J, et al. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load[J].Science,2000,287(5453):637.
31 Chou T W, McCullough R L, Pipes R B. Composites[J]. Scientific American,1986,255(4):193.
32 Thostenson E T, Chou T W. Aligned multi-walled carbon nanotube-reinforced composites: Processing and mechanical characterization[J].Journal of Physics D Applied Physics,2002,35(16):L77.
33 Bradshaw R D, Fisher F T, Brinson L C. Fiber waviness in nanotube-reinforced polymer composites—Ⅱ: Modeling via numerical approximation of the dilute strain concentration tensor[J].Composites Science & Technology,2003,63(11):1705.
34 Fisher F T, Bradshaw R D, Brinson L C. Fiber waviness in nanotube-reinforced polymer composites—Ⅰ: Modulus predictions using effective nanotube properties[J].Composites Science & Technology,2003,63(11):1689.
35 Jiang C. Interaction mechanism between carbon nanotube and epoxy resin and its effect on glass transition temperature and impact toughness[D].Changsha: National University of Defense Technology,2016(in Chinese).
蒋彩.碳纳米管与环氧树脂的作用机制及对玻璃化转变温度和韧性的影响[D].长沙:国防科技大学,2016.
36 Chandrasekaran V, Advani S, Santare M. Role of processing on interlaminar shear strength enhancement of epoxy/glass fiber/multi-walled carbon nanotube hybrid composites[J].Carbon,2010,48(13):3692.
37 Ma P C, Siddiqui N A, Marom G, et al. Dispersion and functiona-lization of carbon nanotubes for polymer-based nanocomposites: A review[J].Composites Part A Applied Science and Manufacturing,2010,41(10):1345.
38 Bekyarova E, Thostenson E T, Yu A, et al. Functioinalized single-walled carbon nanotubes for carbon fiber-epoxy composites[J].Journal of Physical Chemistry C,2007,111(48):17865.
39 Gojny F H, Wichmann M H G, Köpke U, et al. Carbon nanotube-reinforced epoxy-composites: Enhanced stiffness and fracture toughne ss at low nanotube content[J].Composites Science & Technology,2004,64(15):2363.
40 Gojny F H, Wichmann M H G, Fiedler B, et al. Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites[J].Composites Part A Applied Science and Manufacturing,2005,36(11):1525.
41 Fan Z, Santare M, Advani S G. Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes[J].Composites Part A Applied Science and Manufactu-ring,2008,39(3):540.
42 Fan Z, Advani S G. Characterization of orientation state of carbon nanotubes in shear flow[J].Polymer,2005,46(14):5232.
43 Ashrafi B, Guan J, Mirjalili V, et al. Enhancement of mechanical performance of epoxy/carbon fiber laminate composites using single-walled carbon nanotubes[J]. Composites Science & Technology,2011,71(13):1569.
44 Thostenson E T, Li W, Wang D, et al. Carbon nanotube/carbon fiber hybrid multiscale composites[J].Journal of Applied Physics,2002,91(9):6034.
45 Bekyarova E, Thostenson E T, Yu A, et al. Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites[J].Langmuir,2007,23(7):3970.
46 He X D, Zhang F H, Wang R G, et al. Preparation of a carbon nanotube/carbon fiber multi-scale reinforcement by grafting multi-walled carbon nanotubes onto the fibers[J].Carbon,2007,45(13):2559.
47 Wicks S S, Villoria R G D, Wardle B L. Interlaminar and intralaminar reinforcement of composite laminates with aligned carbon nanotubes[J].Composites Science & Technology,2010,70(1):20.
48 Wicks S S, Wang W, Williams M R, et al. Multi-scale interlaminar fracture mechanisms in woven composite laminates reinforced with aligned carbon nanotubes[J].Composites Science & Technology,2014,100(100):128.
49 Li Y, Hori N, Arai M, et al. Improvement of interlaminar mechanical properties of CFRP laminates using VGCF[J].Composites Part A Applied Science and Manufacturing,2009,40(12):2004.
50 Arai M, Noro Y, Sugimoto K, et al. Mode I and mode II interlaminar fracture toughness of CFRP laminates toughned by carbon nanofiber interlayer[J].Composites Science & Technology,2008,68(2):516.
51 Zhu S, Su C, Lehoczky S, et al. Carbon nanotube growth on carbon fibers[J].Diamond and Related Materials,2003,12(10-11):1825.
52 Sun L, Warren G, Sue H. Partially cured epoxy/SWCNT thin films for the reinforcement of vacuum-assisted resin-transfer-molded composites[J].Carbon,2010,48(8):2364.
53 Khan S, Kim J. Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibers[J].Carbon,2012,50(14):5265.
54 Stahl J, Bogdanovich A, Bradford P D. Carbon nanotube shear-pressed sheet interleaves for Mode I interlaminar fracture toughness enhancement[J].Composites Part A Applied Science and Manufacturing,2016,80:127.
55 Liu G, Hu X, Zhang P, et al. Carbon nanotube film interlayer toughened carbon fiber reinforced epoxy resin hybrid composites[J].Acta Polymerica Sinica,2013(10):1334(in Chinese).
刘刚,胡晓兰,张朋,等.碳纳米管膜层间改性碳纤维/环氧树脂复合材料[J].高分子学报,2013(10):1334.
56 Deng H, Wang L, Feng Y, et al. Effect of carbon nanotube film interlayer toughening on mechanical properties of carbon fiber reinforced composite[J].Aerospace Materials & Technology,2015(5):31(in Chinese).
邓火英,王立敏,冯奕钰,等.碳纳米管膜层间增韧对碳纤维复合材料力学性能的影响[J].宇航材料工艺,2015(5):31.
57 Xu H, Tong X, Zhang Y, et al. Mechanical and electrical properties of laminated composites containing continuous carbon nanotube film interleaves[J].Composites Science & Technology,2016,127:113.
58 Garcia E J, Wardle B L, John H. Joining prepreg composite interfaces with aligned carbon nanotubes[J].Composites Part A Applied Science and Manufacturing,2008,39(6):1065.
59 Villoria R, Hallander P, Ydrefors L, et al. In-plane strength enhancement of laminated composites via aligned carbon nanotube interlaminar reinforcement[J].Composites Science & Technology,2016,133:33.