| RESEARCH PAPER |
|
|
|
|
|
| Effect of Friction Stir Processing on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy |
| YU Liangliang1,2, ZHANG Zheng1,2, WANG Kuaishe1,2, WANG Wen1,2, JIA Shaowei1,2
|
1 College of Metallurgy Engineering, Xi’an University of Architecture and Technology, Xi’an 710055;
2 National and Local Joint Engineering Research Center of Function Material Processing,Xi’an University of Architecture and Technology, Xi’an 710055 |
|
|
|
|
Abstract AZ31 magnesium alloy plates were fabricated by friction stir processing(FSP), and the microstructure and mecha-nical properties of the processed region were studied. The results showed that the average grain size increased as a result of increasing rotation speed under the same travelling speed. After FSP, grain size and texture affect the mechanical properties of AZ31 magnesium alloy significantly, the twin deformation would be more likely to occur with greater average grain size. Texture type mainly included basal plane texture and fiber texture, while the yield strength was lower when basal plane texture was in the soft orientation, but fiber texture would weaken the influence of basal plane texture of mechanical properties.
|
|
Published: 11 May 2018
|
|
|
|
|
1 陈振华.变形镁合金[M].北京:化学工业出版社,2005:1.
2 Li Nali, Huang Guangjie, Liu Qing. Application of EBSD technique on the study of the texture of extruded AZ31 magnesium alloy[J].Journal of Chinese Electron Microscopy Society,2011,30(10):309(in Chinese).
李娜丽,黄光杰,刘庆.EBSD技术在研究AZ31镁合金挤压织构中的应用[J].电子显微学报,2011,30(10):309.
3 Mishra R S, Ma Z Y. Friction stir welding and processing[J].Mate-rial Science and Engineering A,2005,50:1.
4 Mishra R S, Mahoney M W. Friction stir processing: A new grain refinement technique to achieve high strain rate superplasticity in commercial alloys[J].Materials Science Forum,2001,357-359:507.
5 Xu N, Bao Y F. Enhanced mechanical properties of tungsten inert gas welded AZ31 magnesium alloy joint using two-pass friction stir processing with rapid cooling[J].Material Science and Engineering A,2016,665:292.
6 Chai F, Zhang D T, Li Y Y. Microstructures and tensile properties of submerged friction stir processed[J].Journal of Magnesium and Alloys,2015,50(8):203.
7 Pan F S, Xu A L, Deng D, et al. Effects of friction stir welding on microstructure properties of magnesium alloy Mg-5Al-3Sn AZ91 magnesium alloy and mechanical[J].Materials Design,2016,110:266.
8 Cao G H, Zhang D T, Zhang W, et al. Microstructure evolution and mechanical properties of Mg-Nd-Y alloy in different friction stir processing conditions[J].Journal of Alloys and Compounds,2015,636:12.
9 Yang Q, Xiao B L, Zhang Q, et al. Exceptional high-strain-rate superplasticity in Mg-Gd-Y-Zn-Zr alloy with long-period stacking order phase[J].Scripta Materialia,2013,69(s11-12):801.
10 Chang C I, Du X H, Huang J C. Achieving ultrafine grain size in Mg-Al-Zn alloy by friction stir processing[J].Scripta Materialia,2007,57(3):209.
11 Lu D, Jiang Y, Zhou R. Wear performance of nano-Al2O3 particles and CNTs reinforced magnesium matrix composites by friction stir processing[J].Wear,2013,305(1-2):286.
12 Liu W C, Morris J G. Comparison of the texture evolution in cold rolled DC and SC AA 5182 aluminum alloy[J].Material Science and Engineering A,2003,339(1-2):183.
13 Liu W C, Zhai T, Morris J G. Comparison of recrystallization and recrystallization textures in cold-rolled DC and CC AA 5182 aluminum alloys[J].Material Science and Engineering A,2003,358(1):84.
14 Liu W C, Li J, Yuan H, et al. Effect of recovery on the recrystallization texture of an Al-Mg alloy[J].Scripta Materialia,2007,57(9):833.
15 Frigaard Q, Grong Q, Milding O T. A process of friction stir wel-ding of age harding aluminum alloy[J].Metallurgical and Materials Transactions A,2001,32(5):1189.
16 Gao Xue. Study on room temperature deformation behavior of AZ31 magnesium alloy prepared by friction stir processing[D].Xi’an: Xi’an University of Architecture and Technology,2015(in Chinese).
高雪.搅拌摩擦加工AZ31镁合金室温变形行为的研究[D].西安:西安建筑科技大学,2015.
17 Xiong Feng, Zhang Datong, Wang Saixiang, et al. Influence of processing parameters on microstructure and mechanical properties of AZ31 alloy by friction stir welding[J].Hot Working Technology,2011,40(3):1(in Chinese).
熊峰,张大童,王赛香,等.加工参数对搅拌摩擦加工AZ31镁合金组织和力学性能的影响[J].热加工工艺,2011,40(3):1.
18 Wang Saixiang, Zhang Datong. Microstructure and mechanical pro-perties of frictional stirring processed(FSP) MB8 magnesium alloy[J].Special Casting & Nonferrous Alloys,2011,31(1):83(in Chinese).
王赛香,张大童.搅拌摩擦加工MB8镁合金的组织与力学性能分析[J].特种铸造及有色合金,2011,31(1):83.
19 Hung F Y, Shih C C, Chen L H. Microstructures and high temperature mechanical properties of friction stirred AZ31-Mg alloy[J].Journal of Alloys and Compounds,2007,428:106.
20 Wang Y N, Chang C I, Lee C J, et al. Texture and weak grain size dependence in friction stir processed Mg-Al-Zn alloy[J].Scripta Materialia,2006,55(7):637.
21 Yuan W, Mishra R S, Carlson B, et al. Effect of texture on the mechanical behavior of ultrafine grained magnesium alloy[J].Scripta Materialia,2011,64:580.
22 Kim W J, Hong S I, Kim Y S, et al. Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing[J].Acta Materialia,2003,51(11):3293.
23 Barnett M R, Keshavarz Z, Beer A G, et al. Influence of grain size on the compressive deformation of wrought Mg-3Al-1Zn[J].Acta Materialia,2004,52(17):5093.
24 Zhan Meiyan, Li Chunming, Shang Junling. Investigation of the plastic deformation mechanism and twinning of magnesium alloys[J].Materials Review A:Review Papers,2011,25(2):1(in Chinese).
詹美燕,李春明,尚俊玲.镁合金的塑性变形机制和孪生变形研究[J].材料导报:综述篇,2011,25(2):1.
25 Ding Wenjiang, Jin Li, Wu Wenxiang, et al. Texture and texture optimization of wrought Mg alloy[J].The Chinese Journal of Nonferrous Metals,2011,21(10):2371(in Chinese).
丁文江,靳丽,吴文祥,等.变形镁合金中的织构及其优化设计[J].中国有色金属学报,2011,21(10):2371. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2018, Vol. 32 
