高硼铸钢的研究进展<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.05.011

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2273KB)
Export: BibTeX | EndNote (RIS)

Abstract High boron cast steels are novel wear resistance materials mainly alloyed by B element. Focused on the Fe₂B phases in high boron cast steels, the effects of alloying elements on the microstructures and mechanical properties are reviewed. Besides, high boron cast steels also show superior corrosion resistance and corrosion-wear resistance of molten Zn and Al. Based on the author′s recent progress referring to novel high boron cast steels, their corrosion resistance and corrosion-wear resistance of molten Al were introduced. Borides played a key role in improving the high boron cast steels′ corrosion resistance and corrosion-wear resistance of molten Al. Cr-rich Fe₂B and Mo-rich Fe₂B act differently during the corrosion of molten Al. A periodic layered structure is formed during the interfacial reaction between Cr-rich Fe₂B and molten Al, while Mo-rich Fe₂B fractures and no chemical reaction happens. Preferential dissolution happens during the corrosion-wear of the primary Cr-rich Fe₂B in molten Al. Then, they crack and peel off under the action of wear. However, the corresponding mechanism needs to be investigated further. At last, the development trends of high boron cast steels were also proposed.

Key words： high boron cast steel borides high temperature melt corrosion corrosion-wear

Published: 02 May 2018

CLC number:

TG142.1

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Xianman
	LUO Hongfeng
	SHI Liuyong

Cite this article:

ZHANG Xianman,LUO Hongfeng,SHI Liuyong. Research Progress on High Boron Cast Steel[J]. Materials Reports, 2017, 31(5): 65-71.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.05.011 OR http://www.mater-rep.com/EN/Y2017/V31/I5/65

1 Ma S Q, Xing J D, Fu H G, et al. Microstructure and crystallography of borides and secondary precipitation in 18 wt.% Cr-4 wt.% Ni-1 wt.% Mo-3.5 wt.%-0.27 wt.% C steel [J]. Acta Mater,2012,60:831.
2 Mejia I, Salar-Reyes A E, Calvoalvo J, et al. Effect of Ti and B microadditions on the hot ductility behavior of a high-Mn austenitic Fe-23Mn-1.5Al-1.3Si-0.5C TWIP steel [J]. Mater Sci Eng A,2015,648:311.
3 Lv Z, Fu H G, Xing J D, et al. Microstructure and crystallography of borides and mechanical properties of Fe-B-C-Cr-Al alloys [J]. J Alloys Compd,2016,662:54.
4 Yi D W, Xing J D, Ma S Q, et al. Investigations on microstructures and two-body abrasive wear behavior of Fe-B cast alloy [J]. Tribol Lett,2012,45:427.
5 Lentz J, Rottge A, Theisen W. Solidification and phase formation of alloys in the hypoeutectic region of the Fe-C-B system [J]. Acta Mater,2015,99:119.
6 Zhang X M, Chen W P. Review on corrosion-wear resistance performance of materials in molten aluminum and its alloys [J]. Trans Nonferrous Metals Soc China,2015,25(6):1715.
7 Yan D R, Yang Y, Dong Y C, et al. Phase transitions of plasma sprayed Fe-Al intermetallic coating during corrosion in molten zinc at 640 ℃ [J]. Intermetallics,2012,22:160.
8 Hnatko M, Tatarkova M, Galuskova D, et al. Corrosion of engineering ceramic materials by molten iron partⅠ: Silicon nitride and SiAlON [J]. Corros Sci,2016,107:76.
9 Beznosov A V, Novozhilova O O, Shumikov A I, et al. Triboengineering problems of lead coolant in innovative fast reactors [J]. Nucl Eng Des,2013,265:675.
10 Shin S H, Kim S H, Kim J H. Model of liquid gallium corrosion with austenitic stainless steel at a high temperature [J]. J Nucl Mater,2014,450:314.
11 Hou L F, Wei Y H, Le Y G, et al. Erosion process analysis of die-casting inserts for magnesium alloy components [J]. Eng Failure Analy,2013,33:457.
12 Kondo M, Takahashi M, Tanaka T, et al. Compatibility of reduced activation ferritic martensitic steel JLF-1 with liquid metals Li and Pb-17Li [J]. Fus Eng Des,2012,87:1777.
13 Kim H J, Yoon B H, Lee C H. Sliding wear performance in molten Zn-Al bath of cobalt-based overlayers produced by plasma-transferred arc weld-surfacing [J]. Wear,2003,254:408.
14 Zhang J F, Deng C M, Song J B, et al. MoB-CoCr as alternatives to WC-12Co for stainless steel protective coating and its corrosion behavior in molten zinc [J]. Surf Coat Technol,2013,235:811.
15 Lin J, Carrera S, Kunrath A O, et al. Design methodology for optimized die coatings: The case for aluminum pressure die-casting [J]. Surf Coat Technol,2006,201:2930.
16 Mohammed A, Marshall M B, Lewis R. Development of a method for assessing erosive wear damage on dies used in aluminium casting [J]. Wear,2015,332-333:1215.
17 Song J, Denouden T, Han Q. Mechanisms of soldering formation on coating core pins [J]. Metall Mater Trans A,2012,43:415.
18 Song J, Wang X M, Denouden T, et al. Evolution of intermetallic phases in soldering of the die casting of aluminum alloys [J]. Metall Mater Trans A,2016,47:2609.
19 Guo C Q, Kelly P M. Boron solubility in Fe-Cr-B cast irons [J]. Mater Sci Eng A,2003,352:40.
20 Wang Z S,Chen X,Li Y X,et al.Effects of B on high temperature mechanical properties and thermal fatigue behavior of copper die-casting steel [J]. Acta Metall Sin,2015,51(5):519(in Chinese) .
王志胜,陈祥,李言祥,等. B对铜合金压铸热作模具钢高温力学及疲劳性能的影响 [J]. 金属学报,2015,51(5):519.
21 Coi M, Koc F G, Oitem H, et al. The role of boron content in high alloy white cast iron (Ni-Hard 4) on microstructure, mechanical properties and wear resistance [J]. Wear,2016,348-349:158.
22 Ma S Q, Xing J D, Liu G F, et al. Effect of chromium concentration on microstructure and properties of Fe-3.5B alloy [J]. Mater Sci Eng A,2010,527:6800.
23 Jian Y X, Huang Z F, Xing J D, et al. Effects of chromium addition on fracture toughness and hardness of oriented bulk Fe₂B crystals [J]. Mater Charact,2015,110:138.
24 Jian Y X, Huang Z F, Xing J D, et al. Effect of improving Fe₂B toughness by chromium addition on the two-body abrasive wear behavior of Fe-3.0 wt% B cast alloy [J]. Tribol Int,2016,101:331.
25 Zhang J J, Gao Y M, Xing J D. Effects of chromium addition on microstructure and abrasion resistance of Fe-B cast alloy [J]. Tribol Lett,2011,44:31.
26 Rottger A, Lentz J, Theisen W. Boron-alloyed Fe-Cr-C-B tool steels—Thermodynamic calculations and experimental validation [J]. Mater Des,2015,88:420.
27 Goldfarb I, Kaplan W D, Ariely S, et al. Fault-induced polytypism in (Cr, Fe)₂B [J]. Philos Mag A,1995,72(4): 963.
28 Hu X B, Zhu Y L, et al. Atomic configurations of various kinds of structural intergrowth in the polytypic M₂B-type boride precipitated in the Ni-based superalloy [J]. Acta Mater,2015,100:64.
29 Liu Y, Li B H, Li J, et al. Effect of titanium on the ductilization of Fe-B alloys with high boron content [J]. Mater Lett,2010,64:1299.
30 Cha L, Lartigue-Korinek S, Walls M, et al. Interface structure and chemistry in a novel steel-based composite Fe-TiB₂ obtained by eutectic solidification [J]. Acta Mater,2012,60:6382.
31 Lartigue-Korinek S, Walls M, Haneche N, et al. Interfaces and defects in a successfully hot-rolled steel-based composite Fe-TiB₂ [J]. Acta Mater,2015,98:297.
32 He L, Liu Y, Li J, et al. Microstructure and mechanical properties for TIG welding joint of high boron Fe-Ti-B alloy [J]. Rare Metal Mater Eng,2014,43(2):283.
33 Zhi X H, Liu J Z, Xing J D, et al. Effect of cerium modification on microstructure and properties of hypereutectic high chromium cast iron [J]. Mater Sci Eng A,2014,603:98.
34 Yi D W, Zhang Z Y, Fu H G, et al. A study on the microstructure and toughness of Fe-B cast alloy containing rare earth [J]. J Mater Eng Perform,2015,24:626.
35 Yi D W, Zhang Z Y, Fu H G, et al. Investigations on microstructures and toughness of Fe-B cast alloy containing Titanium and nitrogen [J]. J Mater Eng Perform,2014,23:673.
36 Yi D W, Xing J D, Zhang Z Y, et al. Effect of titanium and nitrogen additions on the microstructures and three-body abrasive wear behaviors of Fe-B cast alloys [J]. Tribol Lett,2014,54(2):107.
37 Huang Z F, Xing J D, Lv L L. Effect on tungsten addition on the toughness and hardness of Fe₂B in wear-resistant Fe-B-C cast alloy [J]. Mater Charact,2013,75:63.
38 Jian Y X, Huang Z F, Xing J D, et al. Effects of Mn addition on the two-body abrasive wear behavior of Fe-3.0 wt% B alloy [J]. Tribol Int,2016,103:243.
39 Li F, Li Z H. Study on improvement of hard phase morphology and properties of hypoeutectic Fe-C-B alloy [J]. J Alloys Compd,2014,587:267.
40 Chen X, Wang Z S, Li Y X, et al. Effects of carbon content on high-temperature mechanical and thermal fatigue properties of high-boron austenitic steels [J]. China Foundry,2016,13(1):1.
41 Chen X, Li Y X. Effect of heat treatment on microstructure and mechanical properties of high boron white cast iron [J]. Mater Sci Eng A,2010,528:770.
42 Chen X, Li Y X, Zhang H M. Microstructure and mechanical pro-perties of high boron white cast iron with about 4 wt% chromium [J]. J Mater Sci,2011,46:957.
43 Zhang J J, Xing J D, Ma S Q, et al. Effects of plastic deformation and heat treatment on microstructure and properties of high boron cast steel [J]. J Mater Eng Perform,2011,20:1658.
44 He L, Liu Y, Li J, et al. Effects of hot rolling and titanium content on the microstructure and mechanical properties of high boron Fe-B alloys [J]. Mater Des,2012,36:88.
45 Zhang J, Gao Y, Xing J, et al. Hot deformation and processing maps of Fe-B alloy [J]. Mater Res Innovat,2013, 17:282.
46 Tsipas D N, Triantafyllidis G K, Kipkemoi Kiplagat J, et al. Degradation behavior of boronized carbon and high alloy steels in molten aluminuium and zinc [J]. Mater Lett,1998,37:128.
47 Fu H G, Song X D, Lei Y P, et al. Effect of boron concentration on the corrosion resistance of cast B-bearing steel in molten zinc [J]. Mater Corros,2008,59(12):948.
48 Ma S Q, Xing J D, Fu H G, et al. Interface characteristics and corrosion behavior of oriented bulk Fe₂B alloy in liquid zinc [J]. Corros Sci,2014,78:71.
49 Ma S Q, Xing J D, Fu H G, et al. Effects of boron concentration on the corrosion resistance of Fe-B alloys immersed in 460 ℃ molten zinc bath [J]. Surf Coat Technol,2010,204:2208.
50 Ma S Q, Xing J D, Yi D W, et al. Microstructure and corrosion behavior of cast Fe-B alloys dipped into liquid zinc bath [J].Mater Charact,2010,61:866.
51 Ma S Q, Xing J D, Yi D W, et al. Effects of chromium addition on corrosion resistance of Fe-3.5B alloy in liquid zinc [J]. Surf Coat Technol,2011,205:4902.
52 Ma S Q, Xing J D, Fu H G, et al. Interfacial morphology and corrosion resistance of Fe-B cast steel containing chromium and nickel in liquid zinc [J]. Corros Sci,2011,53:2826.
53 Ma S Q, Xing J D, Fu H G, et al. Microstructure and interface characteristics of Fe-B alloy in liquid 0.25 wt.% Al-Zn at various bath temperatures [J]. Mater Chem Phys,2012,132:977.
54 Wang Y,Xing J D,Ma S Q,et al.Interfacial morphologies and erosion-corrosion behavior of directional Fe-3.5 wt.% B steel in flowing liquid Zn containing 0.30 wt.% Al [J]. Corros Sci,2016,112:25.
55 Ma S Q, Xing J D, He Y L, et al. Effect of orientation and lamellar spacing of Fe₂B on interfaces and corrosion behavior of Fe-B alloy in hot-dip galvanization [J]. Acta Mater,2016,115:392.
56 Wang Y, Xing J D, Ma S Q, et al. Effect of Fe₂B orientation on erosion-corrosion behavior of Fe-3.5 wt.% B steel in flowing zinc [J]. Corros Sci,2015,98:240.
57 Liu G Z, Xing J D, Ma S Q, et al. Effects of erosion angle on erosion properties of Fe-B alloy in flowing liquid zinc [J]. Metall Mater Trans A,2015,46:1900.
58 Wang Y, Xing J D, Ma S Q, et al. Effect of 0.3 wt.% Al addition in flowing liquid zinc on the erosion-corrosion behavior of Fe-3.5 wt.% B alloy [J]. J Mater Eng Perform,2015,24:2444.
59 Wang Y, Xing J D, et al. Interface characterization and erosion-corrosion behavior of directional Fe-3.5 wt.% B steel in flowing liquid zinc at various temperatures [J]. Corros Sci,2016,104:260.
60 Wang Y, Xing J D, Ma S Q, et al. Erosion-corrosion interaction on Fe-B alloy in flowing liquid zinc [J]. J Xi’an Jiaotong University,2015,49(7):92(in Chinese) .
王勇, 邢建东, 马胜强, 等. Fe-B合金在锌液中冲刷与腐蚀的交互作用[J]. 西安交通大学学报,2015, 49(7):92.
61 Zhang Xianman. Research on the crrosion-war rsistance of the nvel Fe-Cr-B cst seels and teir tree-dmensional iterconnected ZrO₂ rinforced mtal mtrix cmposites in mlten auminum [D]. Guangzhou: South China University of Technology,2015(in Chinese) .
张先满. 新型Fe-Cr-B铸钢及其三维网络结构ZrO₂增强复合材料的铝液腐蚀-磨损研究[D]. 广州:华南理工大学,2015.
62 Zhang X M, Li X M, Chen W P. Interfacial reactions of duplex stainless steels with molten aluminum [J]. Surf Interface Anal,2015,47:648.
63 Sorour A A, Chromik R R, Gauvin R, et al. Understanding the solidification and microstructure evolution during CSC-MIG welding of Fe-Cr-B-based alloy [J]. Mater Charact,2013,86:127.
64 Hu X B, Zhu Y L, Ma X L. Crystallographic account of nano-scaled intergrowth of M₂B-type borides in nickel-based superalloys [J]. Acta Mater,2014,68:70.
65 Rijnders M R, et al. Aspects of periodic layer formation in Co₂Si/Zn diffusion couples [J]. Scr Metall Mater,1995,32(12):1931.
66 Yu M, Shivpuri R, Rapp R A. Effects of molten aluminum on H13 dies and coatings [J]. J Mater Eng Perform, 1995,4(2):175.