基于二维Voronoi模型的多孔泡沫金属导热性能模拟研究<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.021.019

Abstract
Figure/Table
References
Related Citation (11)

Download:

Full Text ( PDF ) (1419KB)
Export: BibTeX | EndNote (RIS)

Abstract Porous metal foams is a new kind of functional material with low density, high mechanical strength, high thermal conductivity and other excellent properties. Porous metal foam has a wide application prospect and has been widely concerned and studied. The effective thermal conductivity (k^*) of porous material is related to the pore structure. Only the porosity (ε) is not enough to describe the pore structure of the real material. Based on 2-D Voronoi model in this paper, the randomness (S) and porosity of models were defined to describe the pore structure parameters. By adjusting the deviation factor (α) and edge width coefficient (β) of the model to change the range of randomness and porosity. The influence of the randomness and porosity on the effective thermal conductivity of the model was analyzed,which showed that the randomness and porosity affect the effective thermal conductivity. Results showed that randomness increasing leads to effective thermal conductivity decreasing. From the simulations results of random models, it is pointed that the relative effective thermal conductivity of porous metal foam material can be expressed as power function of porosity and randomness.

Key words： porous metal foams Voronoi effective thermal conductivity randomness porosity

Published: 08 May 2018

CLC number:	TB34
	TK124

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Xinming
	CHEN Danyang
	WANG Hua

Cite this article:

ZHANG Xinming,CHEN Danyang,WANG Hua. Simulated Analysis of Thermal Conductivity of Porous Metal Foams with 2-D Voronoi Model[J]. Materials Reports, 2017, 31(21): 135-138.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.021.019 OR http://www.mater-rep.com/EN/Y2017/V31/I21/135

1 Wang Jing, Yang Jun, Zhang Jian. Research progress in preparation techniques of porous metal materials[J]. Ordnance Mater Sci Eng, 2013(6):134.
王静,杨军,张建. 多孔金属材料制备技术研究进展[J]. 兵器材料科学与工程, 2013(6):134.
2 Fang Y C, Wang H, Zhou Y, et al. Development of some new porous metal materials[J]. Mater Sci Forum, 2007,534-536:949.
3 Burg M W D V D, Shulmeister V, Geissen E V D, et al. On the linear elastic properties of regular and random open-cell foam models[J]. J Cellular Plastics, 1997, 33(1):31.
4 Zhu H X, Thorpe S M, Windle A H. The geometrical properties of irregular two-dimensional Voronoi tessellations[J]. Philosophical Magazine A, 2001, 81(12):2765.
5 Li Z, Zhang J, Wang Z, et al. Study on the thermal properties of closed-Cell metal foams based on Voronoi random models[J]. Numerical Heat Transfer Appl, 2013, 64(12):1038.
6 Tang L, Shi X, Zhang L, et al. Effects of statistics of cell’s size and shape irregularity on mechanical properties of 2D and 3D Voronoi foams[J]. Acta Mech, 2014, 225(4):1361.
7 Shi Xuepeng.Modeling and constitutive relationshipof metallic foams considering geometric irregularity[D]. Guangzhou:South China University of Technology, 2014.
时学鹏.考虑几何不规则度的泡沫金属建模及其本构关系研究[D]. 广州:华南理工大学, 2014.
8 Klett J W, Mcmillan A D, Gallego N C, et al. The role of structure on the thermal properties of graphitic foams[J]. J Mater Sci, 2004, 39(11):3659.
9 Leong K C, Li H Y. Theoretical study of the effective thermal conductivity of graphite foam based on a unit cell model[J]. Int J Heat Mass Transfer, 2011,54(25):5491.
10Hutter C, Büchi D, Zuber V, et al. Heat transfer in metal foams and designed porous media[J]. Chem Eng Sci, 2011,66(17):3806.
11Liu Shuang, Zhang Boming, Xie Weihua. Study on effective thermal conductivity of open metal foam[J]. J Funct Mater, 2009,40(5):794.
刘双, 张博明, 解维华. 开孔金属泡沫有效热导率的理论分析与实验研究[J]. 功能材料, 2009,40(5):794.