冷却槽对自孕育法制备ZA92镁合金组织的细化作用<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.012.021

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2143KB)
Export: BibTeX | EndNote (RIS)

Abstract ZA92 magnesium alloy was prepared by self-inoculation method(SIM). Refined role of cooling channel on microstructure was studied, and refined mechanism was analyzed. Results show that nucleation in melt were effected by chilling action of cooling channel, flow velocity and shear force of the melt. The suitable slope angle of cooling channel was favorable for liberation and proliferation of the grains.When the melt was flowing on the cooling channel, the microstructure evolution was coarse dendrite→fined dendrite→equiaxed grain→rose crystal→near spherical crystal. Neither smaller nor bigger cooling channel angle was benefitial for refined grain. When cooling channel angel was between 30-45°, the distribution of grain size was more concentrated and smaller, and the average grain size was between 47.5-51.4 μm.

Key words： cooling channel ZA92 magnesium alloy refined grain self-inoculation method

Published: 08 May 2018

CLC number:

TG146.2

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Chun
	FAN Xinhui
	YUAN Xunfeng
	NAN Ning
	HAN Xi
	LI Yuandong

Cite this article:

LI Chun,FAN Xinhui,YUAN Xunfeng, et al. Grain Refinement Effect of Cooling Channel on ZA92 Magnesium Alloy Prepared by Self-inoculation Method[J]. Materials Reports, 2017, 31(12): 98-103.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.012.021 OR http://www.mater-rep.com/EN/Y2017/V31/I12/98

1 Mordike B L, Ebert T. Magnesium: Properties-applications-potential[J]. Mater Sci Eng A,2001,302(1):37.
2 Li Aiwen, Zhu Hongmei, Jiao Dongling, et al. Research progress in improvement in creep resistance of magnesium alloys by alloying[J]. Mater Rev,2008,22(11):74(in Chinese).
李爱文, 朱红梅, 焦东玲, 等. 合金化提高镁合金抗蠕变性能的研究进展[J]. 材料导报,2008,22(11):74.
3 Zhang Jing, Yuan Fuqing, Huang Hao. Mechanical properties of as-cast and as-extruded Mg-Zn-Al-Re magnesium alloys at room temperature and elevated temperatures[J]. Rare Metal Mater Eng,2013,42(3):593(in Chinese).
张静, 袁付庆, 黄浩. 铸态和挤压变形态Mg-Zn-Al-Re镁合金的室温和高温力学性能[J].稀有金属材料与工程,2013,42(3):593.
4 Wan Xiaofeng, Ni Hongjun, Huang Mingyu, et al. Microstructure, mechanical properties and creep resistance of Mg-(8%-12%)Zn-(2%-6%)Al alloys[J]. Trans Nonferrous Met Soc China,2013,23(4):896.
5 Chen Yu’an, Gao Junjie, Song Yu, et al. The influences of Sr on the microstructure and mechanical peoperties of Mg-5Zn-2Al alloy[J]. Mater Sci Eng A,2016,671:127.
6 Feng Kai, Huang Xiaofeng, Ma Ying, et al. Effects of different solution time on microstructure and mechanical properties of ZA72 magnesium alloy[J]. Chinese J Nonferrous Met,2011,21(9):2035.
7 Zhang Jing, Yuan Fuqing, Du Yong. Enhanced age-strengthening by two-step progressive solution treatment in an Mg-Zn-Al-Re alloy[J]. Mater Des,2013,52:332.
8 Li Yujuan, Tang Aitao. Recent development of grain refining technologies for magnesium alloys[J]. Mater Rev: Rev,2013,27(9):125(in Chinese).
李玉娟, 汤爱涛. 镁合金晶粒细化的研究进展[J].材料导报: 综述篇,2013,27(9):125.
9 Xing Bo, Li Yuandong, Ma Ying, et al. Microstructure of partially remelted billet of AM60 alloy prepared with self-inoculation method[J].Trans Nonferrous Met Soc China,2010,20(9):1622.
10 Li Chun,Li Yuandong,Ma Ying,et al. Role of melt processing in preparation of Mg-9Zn-2Al Magnesium alloy semi-solid slurry[J].Chinese J Nonferrous Met,2012,22(6):1536(in Chinese).
李春,李元东,马颖,等. 熔体处理在制备Mg-9Zn-2Al镁合金半固态浆料中的作用[J]. 中国有色金属学报,2012,22(6):1536.
11 Li Chun,Li Yuandong, Ma Ying, et al. Effects of self-inoculation technological parameters on semi-solid microstructure of ZA96 magnesium alloy and interactive nature[J].Chinese J Nonferrous Met,2013,23(3):599(in Chinese).
李春,李元东,马颖,等. 自孕育工艺参数对ZA96镁合金半固态组织的影响及其交互本质[J].中国有色金属学报,2013,23(3):599.
12 Dhno A. 金属的凝固(理论、实践及应用)[M]. 邢建东, 译. 北京: 机械工业出版社,1990.
13 Toshio Haga, Shinsuke Suzuki. Casting of aluminum alloy ingots for thixoforming using a cooling slope[J]. J Mater Process Technol,2001,118:169.
14 Guan Renguo,Li Jianping,Chen Liqing,et al.Mechanism of alloy microstructure formation during vibrating wavelike sloping plate process[J]. Chinese J Mater Res,2008,22(4):363(in Chinese).
管仁国, 李建平, 陈礼清, 等. 波浪型倾斜板振动过程中合金组织的形成机理[J].材料研究学报,2008,22(4):363.
15 Chen Zhengzhou, Mao Weimin, Wu Zongchuang. Influence of serpentine channel pouring process parameters on semi-solid A356 aluminum alloy[J]. Trans Nonferrous Met Soc China,2011,21(5):985.
16 Guan Renguo, Zhao Zhanyong, Huang Hongqian, et al. Theoretical study on boundary distributions and flow-metal heat transfer during melt treatment by cooling sloping plate[J]. Acta Phys Sin,2012,61(20):1(in Chinese).
管仁国, 赵占勇, 黄红乾, 等. 冷却倾斜板熔体处理过程边界层分布及流动传热的理论研究[J]. 物理学报,2012,61(20):1.
17 李洪桂. 冶金原理[M]. 北京: 科学出版社,2011.
18 Guan Renguo, Kang Liwen, Shang Jianhong,et al. Effect of techonological conditions by incline cooling and shearing on microstructure of semisolid state alloy[J]. Special Cast Nonferrous Alloys,2005,25(10):600(in Chinese).
管仁国, 康立文, 尚剑洪, 等. 倾斜式冷却剪切工艺条件对半固态合金组织的影响[J]. 特种铸造及有色合金,2005,25(10):600.
19 Flemings M C. Behavior of metal alloys in the semi-solid state[J]. Metall Trans B,1991,22(3):269.
20 Zhang Zhongtao, Li Jie, Yue Hongyun, et al. Microstructure evolution of A356 alloy under compound field[J]. J Alloys Compd,2009,484:458.