3D打印天线罩技术研究进展

doi:10.11896/cldb.22050328

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (4068KB)
Export: BibTeX | EndNote (RIS)

Abstract Radome is a structural/functional component located in the front of aircraft with the function of heat resistance, wave-transmittance and load-bearing. The design and preparation of high performance radomes has become one of the bottlenecks in the development of new aircraft. 3D printing technology is a recently developed novel processing of additive manufacture, which is able to integrate complex structures. This techno-logy is prospective in the field of radome since it can overcome the limitations of traditional processes. In this review, the progress on 3D printing of radome techniques in terms of 3D printing radome mold, 3D printing sandwich structure, 3D printing radome materials and 3D printing equipment optimization are summarized, and the future development is also prospected.

Key words： 3D printing radome mold wave-transparent material design

Published: 25 November 2022 Online: 2022-11-25

CLC number:

TQ174

Fund:National Natural Science Foundation of China (52172078).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Junsheng
	LI Duan
	LI Xuechao
	GAO Shitao
	WANG Yanfei
	WAN Fan
	LIU Rongjun

Cite this article:

LI Junsheng,LI Duan,LI Xuechao, et al. Technological Advances in 3D Printing of Radomes[J]. Materials Reports, 2022, 36(22): 22050328-10.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22050328 OR http://www.mater-rep.com/EN/Y2022/V36/I22/22050328

1 Lei J X. Journal of Ceramics, 2019, 40 (3), 277(in Chinese).
雷景轩.陶瓷学报, 2019, 40 (3), 277.
2 Kandi K K, Thallapalli N, Chilakalapalli S P R.International Journal of Applied Ceramic Technology, 2015, 12(5), 909.
3 Suzdal'tsev E I.Refractories and Industrial Ceramics, 2015, 55(5), 377.
4 Zhu C Y. Study on the preparation and properties of wave-transparent materials for 3D printing. Master's Thesis, National University of Defense Technology, China, 2017(in Chinese).
朱晨颖.用于3D打印的透波材料制备及性能研究. 硕士学位论文, 国防科技大学, 2017.
5 Wang T, Lu X, Wang A.International Journal of Applied Ceramic Technology, 2020, 17(6), 2477.
6 Zhou S, Mei H, Chang P, et al.Coordination Chemistry Reviews, 2020, 422, 213486.
7 Chen Z, Sun X, Shang Y, et al.Journal of Advanced Ceramics, 2021, 10(2), 195.
8 Saroia J, Wang Y, Wei Q, et al.International Journal of Advanced Manufacturing Technology, 2020, 106(5), 1695.
9 Ngo T D, Kashani A, Imbalzano G, et al.Composites Part B: Enginee-ring, 2018, 143, 172.
10 Zhang H, Huang L, Tan M, et al.Micromachines, 2022, 13(1), 81.
11 Kalsoom U, Nesterenko P N, Paull B.RSC Advances, 2016, 6(65), 60355.
12 Man Y, Ding G, Luo X, et al.Journal of Asian Ceramic Societies, 2021, 9(4), 1377.
13 Chen Z, Li Z, Li J, et al.Journal of the European Ceramic Society, 2018, 39(4), 661.
14 Cai J, Zhang B, Zhang M, et al.Journal of Central South University of Technology, 2021, 28(4), 983.
15 Wang H J. Research on key technologies of additive manufacturing of high purity quartz ceramic based on thermosetting bonding. Master's Thesis, Tianjin University, China, 2019(in Chinese).
王皓吉.基于热固粘结的高纯石英陶瓷增材制造关键技术研究. 硕士学位论文, 天津大学, 2019.
16 Rasaki S A, Xiong D, Xiong S, et al.Journal of Advanced Ceramics, 2021, 10(3), 442.
17 Kang J W, Ma Q X.China Foundry, 2017, 14(3), 157.
18 Jiang S S, Zhou Y. Journal of Ceramics, 2019, 40(2), 217(in Chinese).
蒋三生, 周洋. 陶瓷学报, 2019, 40(2), 217.
19 Yang S J, Xu L, Yin E H, et al. New Technology & New Process, 2017(4), 84(in Chinese).
杨尚杰, 徐琳, 尹恩怀, 等.新技术新工艺, 2017(4), 84.
20 Gao W, Ding G Q, Luo X D, et al. Refractories & Lime, 2021, 46(6), 56(in Chinese).
高伟(译), 丁国强(译), 罗旭东(译), 等.耐火与石灰, 2021, 46(6), 56.
21 Du R, Yan H W, Zhang X Q. Shipboard Electronic Countermeasure, 2020, 43(5), 82(in Chinese).
杜睿, 严厚伟, 张晓庆.舰船电子对抗, 2020, 43(5), 82.
22 Zhao X C. Design and compression energy absorption of Kagome lattice sandwich structure. Master's Thesis, Changchun University of Technology, China, 2021(in Chinese).
赵兴辰. Kagome点阵夹层结构设计与压缩吸能特性研究. 硕士学位论文, 长春工业大学, 2021.
23 Li T T, Wang L F.Composite Structure, 2017, 175, 46.
24 Qiu Y, Wang J C, Hou Y X, et al. Wireless Internet Technology, 2019, 16(18), 121(in Chinese).
邱月, 王俊成, 侯宇翔, 等.无线互联科技, 2019, 16(18), 121.
25 Sun L J, Dong P, Zeng Y, et al. Journal of the Chinese Ceramic Society, 2021, 49(9), 1853(in Chinese).
孙立君, 董鹏, 曾勇, 等.硅酸盐学报, 2021, 49(9), 1853.
26 Yazdani S H, Akbarzadeh A H, Mirbolghasemi A, et al.Materials and Design, 2018, 160, 179.
27 Dikshit V, Yap Y L, Goh G D, et al. In: 37th Riso International Symposium on Materials Science-Understanding Performance of Composite Materials-Mechanisms Controlling Properties. Riso, Denmark, 2016, pp. 012017.
28 Liu L Q, Xiao X L, Dong K, et al. China Plastics Industry, 2020, 48(1), 91(in Chinese).
刘良强, 肖学良, 董科, 等.塑料工业, 2020, 48(1), 91.
29 Gao S Y. Experimental investigation on mechanical property of ZrO₂ hone-ycomb sandwich structures prepared by 3D printing. Master's Thesis, Shanghai University of Applied Technology, China, 2021(in Chinese).
高淑悦. 基于3D打印氧化锆陶瓷的夹层结构力学性能研究. 硕士学位论文, 上海应用技术大学,2021.
30 Wang R, Shang J, Li X, et al.Rapid Prototyping Journal, 2018, 24(2), 261.
31 Dankov P I.In: 48th European Microwave Conference (EuMC). Madrid, Spain, 2018, pp. 823.
32 Hong Y S, Lu X F, Zhu X L, et al.Journal of Reinforced Plastics and Composites, 2018, 37(16), 1072.
33 Che J K, Chen C C. In: 2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. San Diego, CA, USA, 2017, pp. 695.
34 Wang X, Jiang M, Zhou Z W, et al.Composites Part B-Engineering, 2017, 110, 442.
35 Ren Q C, Cai C D, Deng J, et al. Technology & New Process, 2017(11), 7(in Chinese).
任清川, 蔡成德, 邓俊, 等.新技术新工艺,2017(11), 7.
36 Wang J L, Xie H, Weng Z, et al.Materials & Design, 2016, 105, 152.
37 Graf D, Qazzazie A, Hanemann T.Materials, 2020, 13(11), 2587.
38 Zgalat-Lozynskyy O, Matviichuk O, Tolochyn O, et al.Powder Metallurgy and Metal Ceramics, 2021, 59(9-10), 515.
39 Pei X Y, Chen L, Li J L, et al. Journal of Textile Research, 2016, 37(12), 153(in Chinese).
裴晓园, 陈利, 李嘉禄, 等.纺织学报, 2016, 37(12), 153.
40 Liu G, Zhang X, Chen X, et al.Materials Science & Engineering R-Reports, 2021, 145, 100596.
41 Zheng T Y. Research on key technologies of 3D printing of continuous fiber-reinforced composites. Master's Thesis, Harbin Institute of Technology, China, 2020(in Chinese).
郑天宇.连续纤维复合材料3D打印关键技术研究. 硕士学位论文, 哈尔滨工业大学, 2020.
42 Sano Y, Matsuzaki R, Ueda M, et al.Additive Manufacturing, 2018, 24, 521.
43 Pinargote N W S, Smirnov A, Peretyagin N, et al.Nanomaterials, 2020, 10(7), 1300.
44 Peretyagin N Y, Pristinskii Y O, Kuznetsova E V, et al.Russian Engineering Research, 2020, 40(1), 94.
45 Smirnov A, Pinargote N W S, Peretyagin N, et al.Materials, 2020, 13(3), 687.
46 Zhang T. 3D printing of alumina ceramics through digital light proces-sing. Master's Thesis, Northeastern University, China, 2018(in Chinese).
张涛. 数字光投影3D打印制备氧化铝陶瓷的研究. 硕士学位论文, 东北大学, 2018.
47 Nie G L, Li Y H, Sheng P F. China Building Materials Science and Technology, 2021, 30(3), 79(in Chinese).
聂光临, 黎业华, 盛鹏飞.中国建材科技, 2021, 30(3), 79.
48 Jiao S Z, Qi W, Chen S, et al. Bulletin of the Chinese Ceramic Society, 2020, 39(1), 260(in Chinese).
焦守政, 齐文, 陈松, 等.硅酸盐通报, 2020, 39(1), 260.
49 Zeng Y, Zhang Z J, Sun L J, et al. Journal of Inorganic Materials, 2022, 37(3), 333(in Chinese).
曾勇, 张子佳, 孙立君, 等.无机材料学报, 2022, 37(3), 333.
50 Pei W, Cao S, Yu J H. Materials for Mechanical Engineering, 2020, 44(11), 102(in Chinese).
裴伟, 曹澍, 俞经虎.机械工程材料, 2020, 44(11), 102.
51 Zhang H T. Preparation and mechanical properties of Al₂O₃ ceramics based on SLS/sol infiltration process. Master's Thesis, Harbin University of Technology, China, 2021(in Chinese).
张汉涛. 基于SLS/溶胶浸渗工艺的氧化铝陶瓷制备及力学性能研究. 硕士学位论文, 哈尔滨理工大学, 2021.
52 Tang H H, Chiu M L C, Yen H C.Journal of the European Ceramic So-ciety, 2011, 31(8), 1383.
53 Yang L, Zeng X, Ditta A, et al.Journal of Advanced Ceramics, 2020, 9(3), 312.
54 Cheng X Q. Microstructure of and properties of Al₂O₃(3D)/Al composite reinforced with Al₂O₃(3D) fabricated by 3D printing. Master's Thesis, Guilin University of Technology, China, 2020(in Chinese).
程小强. 3D打印Al₂O₃(3D)陶瓷增强铝基Al₂O₃(3D)/Al复合材料结构与性能. 硕士学位论文, 桂林理工大学, 2020.
55 Guo J Y, Xie H H, Yang X L, et al. Bulletin of the Chinese Ceramic Society, 2021, 40(6), 1927(in Chinese).
郭金玉, 谢呵瀚, 杨小乐, 等.硅酸盐通报, 2021, 40(6), 1927.
56 Wu H, Cheng Y, Liu W, et al.Ceramics International, 2016, 42(15), 17290.
57 Li H, Liu Y, Liu Y, et al.Rare Metals, 2020, 39(5), 577.
58 Deckers J, Meyers S, Kruth J P, et al.Physics Procedia, 2014, 56, 117.
59 Cao S, Wei X, Sun Z, et al.Journal of Materials Processing Technology, 2015, 217, 241.
60 Devries M, Subhash G, Mcghee A, et al.Journal of the European Cera-mic Society, 2018, 38(9), 3305.
61 Wang S X, Li L, Bi L N, et al. Bulletin of the Chinese Ceramic Society, 2021, 40(6), 1943(in Chinese).
王守兴, 李伶, 毕鲁南, 等.硅酸盐通报, 2021, 40(6), 1943.
62 Yan P F, Yan B, Wang L F, et al. Nonferrous Metal Materials and Engineering, 2018, 39(6), 12(in Chinese).
严鹏飞, 严彪, 王联凤, 等.有色金属材料与工程, 2018, 39(6), 12.
63 Wang M, Xie C, He R. et al.Journal of the American Ceramic Society, 2019, 102, 5117.
64 Yang Y, Guo X T, Tang J, et al. Journal of Inorganic Materials, 2022, 37(3), 267(in Chinese).
杨勇, 郭啸天, 唐杰, 等.无机材料学报, 2022, 37(3), 267.
65 Huang R, Jiang Q, Wu H, et al.Ceramic International, 2019, 45(4), 5158.
66 Zhang P J. Study on simulation optimization and material forming direct write 3D printing device based on silicon nitride ceramics. Master's Thesis, Guangdong University of Technology, China, 2021(in Chinese).
张鹏杰. 基于氮化硅陶瓷的直写式3D打印装置仿真优化与材料成型研究. 硕士学位论文, 广东工业大学, 2021.
67 Iyer S, Mcintosh J, Bandyopadhyay A, et al.International Journal of Applied Ceramic Technology, 2010, 5(2), 127.
68 Wilkes J, Hagedorn Y C, Meiners W, et al.Rapid Prototyping Journal, 2013, 19(1), 51.
69 Li H, Liu Y, Liu Y, et al.Journal of the European Ceramic Society, 2021, 41(4), 2938.
70 Shang L Y, Wu Q, Chai Y Q, et al. Electronic Components and Mate-rials, 2018, 37(2), 64(in Chinese).
尚立艳, 伍权, 柴永强, 等.电子元件与材料,2018, 37(2), 64.
71 Chen R, Duan W, Wang G, et al.Journal of the European Ceramic Society, 2021, 41(11), 5495.
72 Wang H Y. Preparation of h-BN-MAS composite by 3D printing. Master's Thesis, Harbin Institute of Technology, China, 2018(in Chinese).
王会媛. 3D打印制备h-BN-MAS复合陶瓷. 硕士学位论文, 哈尔滨工业大学, 2018.
73 Wu Z, Liu W, Wu H, et al.Materials Chemistry and Physics, 2018, 207, 1.
74 Li X, Zhang L, Yin X.Scripta Materialia, 2012, 67, 380.
75 Li J P. Microstructure and properties of Si-B-N ceramics and ceramic matrix composites. Master's Thesis, Northwest University of Technology, China, 2018(in Chinese).
李建平.Si-B-N系透波陶瓷及其复合材料的微结构与性能. 硕士学位论文, 西北工业大学, 2018.
76 Xiao S, Mei H, Han D, et al.Ceramic International, 2018, 44(12), 14122.
77 Moon Y W, Choi I J, Koh Y H, et al.Ceramic International, 2015, 41(9), 12371.
78 Zhang G, Chen H, Yang S B, et al.Journal of the European Ceramic Society, 2018, 38(11), 4014.
79 Tubío C R, Rama A, Gómez M, et al.Ceramic International, 2018, 44(5), 5760.
80 Singh B, Kumar R, Chohan J S.Materials Today: Proceedings, 2020, 33, 1562.
81 Paolo C, Gabriela M, Ralf R, et al. Journal of the American Ceramic Society, 2010, 93(7), 1805.
82 Kashiwagi T, Du F M, Douglas J F, et al.Nature Materials, 2005, 4(12), 928.
83 Zhao Z, Zhou G, Yang Z, et al.Journal of Advanced Ceramics, 2020, 9(4), 403.
84 Zhao Z. Research on direct writing 3D printing of continuous SiO₂ fiber reinforced SiO₂/phosphate composite and its properties. Master's Thesis, Harbin Institute of Technology, China, 2019(in Chinese).
赵哲.直写式3D打印连续SiO₂纤维增强SiO₂/磷酸盐复合材料及其性能研究. 硕士学位论文, 哈尔滨工业大学, 2019.
85 Yu D H. Advanced Ceramics, 2022, 43(1), 39(in Chinese).
于德海.现代技术陶瓷, 2022, 43(1), 39.
86 Laura del M B, Ginebra M P.Journal of the European Ceramic Society, 2021, 41(16), 18.
87 Mansfield B, Torres S, Yu T Y, et al.In: 2019 Manufacturing Science and Engineering Conference. Erie, Pennsylvania, USA, 2019, pp. V001T01A001.1.
88 Jang S, Park S, Bae C J.Biomedical Engineering Letters, 2020, 10(4), 493.
89 Lee J Y, An J, Chua C K.Applied Materials Today, 2017, 7, 120.
90 Hu K, Wei Y, Lu Z, et al.3D Printing and Additive Manufacturing, 2018, 5(4), 311.
91 Grazioso S, Maio M D, Di Gironimo G D.International Journal of Advanced Manufacturing Technology, 2019, 101(5-8), 2027.
92 Yang L, Miyanaji H, Ram D J, et al.In: 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE). Vancouver, Canada, 2016, pp. 43.
93 Good A, Roper D, Mirotznik M.In: 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. Vancouver, Canada, 2015, pp. 1318.
94 Good A J, Roper D, Good B, et al.Smart Materials and Structures, 2017, 26, 095036.
95 Zhang J, Zhou J, Duan G L. Materials Reports, 2022, 36(8), 20080135(in Chinese).
张静, 周婧, 段国林.材料导报, 2022, 36(8), 20080135.