纳米WC对AlCoCrFeNi高熵合金涂层耐磨与耐蚀性能的影响

doi:10.11896/cldb.22030230

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (9099KB)
Export: BibTeX | EndNote (RIS)

Abstract AlCoCrFeNi high-entropy alloys have good mechanical properties, wear resistance, and corrosion resistance, which can be used as a coating material for vulnerable parts. AlCoCrFeNi and AlCoCrFeNi+WC(5wt%) high-entropy alloy powders were pretreated by mechanical powder mixing, and afterwards the coatings were prepared by laser melting on the surface of 45# steel, in order to further improve its performance. The surface morphology, microstructure, element distribution, microhardness, friction wear, and corrosion resistance of the two coatings were comparatively studied. The results show that the surface roughness of the AlCoCrFeNi+WC(5%) coating is lower, that the coating still has a body-centered cubic structure (BCC/B2) and that the grain structure of the coating has been refined, with W and Cr elements concentrated at the grain boundaries. The average microhardness of the coating was increased from 500HV to 600HV due to the combined effect of fine grain strengthening and second phase strengthening. The Si₃N₄ sphere with 4 mm diameter was selected as the friction substrate and tested under a load of 10 N for 30 min. The doping of WC reduced the friction coefficient from 0.8 to 0.6, the wear weight loss was reduced by 0.84 mg, the width and depth of wear scratches were minimized, and the wear level was lighter, compared with those of the AlCoCrFeNi coating. In the electrochemical test with a 3.5wt% NaCl solution, the self-corrosion potential of the WC-doped coating increased by 0.042 V, while the self-corrosion current density reduced by one order of magnitude, and the WC-doped coating exhibited a larger capacitive arc diameter. After the test, the AlCoCrFeNi+WC(5%) coating showed lighter corrosion, and the corrosion pits on its surface were significantly reduced. These results indicate that the addition of nano WC can effectively improve the wear and corrosion resistances of the AlCoCrFeNi high-entropy alloy coating.

Key words： high-entropy alloy laser cladding nano tungsten carbide microstructure wear resistance corrosion resistance

Published: Online: 2022-07-26

CLC number:	TG146
	TB31

Fund:Xinjiang Uygur Autonomous Region Science and Technology Project Plan (2020E0264) and Xinjiang Uygur Auto-nomous Region University Scientific Research Project (XJEDU2019I005).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHONG Zhenzeng
	SUN Yaoning
	CHENG Wangjun
	HAN Chenyang
	SU Caijin
	NAFITHA Delichti
	FAN Zilong

Cite this article:

CHONG Zhenzeng,SUN Yaoning,CHENG Wangjun, et al. Effect of Nano WC on Wear and Corrosion Resistances of AlCoCrFeNi High-entropy Alloy Coating[J]. Materials Reports, 2022, 36(14): 22030230-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22030230 OR http://www.mater-rep.com/EN/Y2022/V36/I14/22030230

1 Yeh J W, Chen S K, Lin S J, et al. Advanced Engineering Materials, 2004, 6(5), 299.
2 Macdonald B E, Fu Z, Zheng B, et al. Jom, 2017, 69, 2024.
3 Li H C, Wang J, Yuan R H, et al. Materials Reports, 2021, 35(17), 17010(in Chinese).
李洪超, 王军, 袁睿豪, 等. 材料导报, 2021, 35(17), 17010.
4 Chao Q, Guo T T, Jarvis T, et al. Surface and Coatings Technology, 2017, 332, 440.
5 Huo W Y, Shi H F, Zhang J Y. Materials Reports A: Review Papers, 2014, 28(12), 76(in Chinese).
霍文燚, 时海芳, 张竞元. 材料导报:综述篇, 2014, 28(12), 76.
6 Jin H, Ji R J, Dong T C, et al. Journal of Materials Research and Technology, 2022, 16, 152.
7 Xiao Q, Sun W L, Yang K X, et al. Surface and Coatings Technology, 2021, 420(9), 127341.
8 Ma Q S, Li Y J, Wang J, et al. Materials and Design, 2016, 92, 897.
9 Wang X H, Zhang M, Du B S, et al. Surface Review and Letters, 2012, 19, 295.
10 Zhang W, Zhang M Y, Peng Y B, et al. International Journal of Refractory Metals and Hard Materials, 2020, 86, 105109.
11 Peng Y B, Zhang W, Li T C, et al. International Journal of Refractory Metals and Hard Materials, 2019, 84, 105044.
12 Bao Y F, Guo L P, Zhong C H, et al. Materials Today Communications, 2021, 26(1), 102154.
13 Li D Y, Jiang H, Zou L J, et al. Hot Working Technology, 2019, 48(10), 117(in Chinese).
李大艳, 姜慧, 邹龙江, 等. 热加工工艺, 2019, 48(10), 117.
14 Vyas A, Menghani J, Natu H. Journal of Materials Engineering and Performance, 2021, 30,2449.
15 An X L, Liu Q B. Rare Metal Materials and Engineering, 2016, 45(9), 2424(in Chinese).
安旭龙, 刘其斌. 稀有金属材料与工程, 2016, 45(9), 2424.
16 Zhang S, Wu C L, Yi J Z, et al. Surface and Coatings Technology, 2015, 262, 64.
17 Zhou R, Chen G, Liu B, et al. International Journal of Refractory Metals and Hard Materials, 2018, 75, 56.
18 Gorsse S, Nguyen M H, Senkov O N, et al. Data in Brief, 2018, 21, 2664.
19 Shang C, Axinte E, Ge W, et al. Surfaces and Interfaces, 2017, 9, 36.
20 Fan Q K, Chen C, Fan C L, et al. Materials Science and Engineering A, 2021, 821, 141607.
21 Guo C A, Zhao Z K, Zhao S, et al. Materials Reports A: Review Papers, 2019, 33(5), 1462(in Chinese).
郭策安, 赵宗科, 赵爽, 等. 材料导报:综述篇,2019,33(5),1462.
22 Jeong D H, Erb U, Aust K T, et al. Scripta Materialia,2003,48(8),1067.
23 Jeong D H, Gonzalez F, Palumbo G, et al. Scripta Materialia, 2001, 44(3), 493.
24 Luo H, Wang X, Dong C, et al. Corrosion Science, 2017, 124, 178.
25 Chou Y L, Yeh J W, Shih H C. Corrosion Science, 2010, 52, 2571.
26 Laleh M, Hughes A E, Xu W, et al. Corrosion Science, 2019, 155, 67.