共混法制备吸燃油自密封复合材料及其性能研究

doi:10.11896/cldb.22020050

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (7614KB)
Export: BibTeX | EndNote (RIS)

Abstract The fuel leakage accident caused by the destruction of fuel storage containers cannot be ignored. In this work, the high oil-absorption resin was added into the polyurethane matrix by blending modification, and the fuel-absorbing self-sealing composites was prepared to be used as a protective coating for fuel storage containers. The effect of particle size of high oil-absorption resin on its own oil-absorption performance and mechanical properties of composites was explored. The self-sealing mechanism of the composite material was analyzed and its self-sealing effect was also observed. Finally, the effects of high oil-absorption resin content on the roughness, adhesion, dynamic mechanical properties and fuel resistance of composites were discussed. The results showed that the smaller the particle size of the high oil-absorption resin, the faster the oil-absorption rate, and the better the mechanical properties of the composite. The addition of high oil-absorption resin increased the roughness of the composite material, and slightly reduced the adhesion and damping properties. The prepared fuel-absorbing self-sealing composites can seal the gap with a diameter of 1.5 mm in only 5 min, which has potential research value in the field of leakage prevention of fuel storage containers.

Key words： fuel high oil-absorption resin polyurethane composites self-sealing coating

Published: 25 September 2023 Online: 2023-09-18

CLC number:	TB332
	TB34

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHEN Guojing
	WANG Yubo
	DENG Shunli
	LIN Huan
	WANG Guojun
	LI Wanli

Cite this article:

CHEN Guojing,WANG Yubo,DENG Shunli, et al. Preparation and Properties of Fuel-absorbing Self-sealing Composites by Blending Method[J]. Materials Reports, 2023, 37(18): 22020050-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22020050 OR http://www.mater-rep.com/EN/Y2023/V37/I18/22020050

1 Semion P, Revital B, Noam L. Marine Pollution Bulletin, 2021, 167, 112338.
2 Wang Y J, Lee K, Liu D Y, et al. Environmental Pollution, 2020, 263, 114343.
3 Chen J H, Zhang W P, Wan Z, et al. Journal of Cleaner Production, 2019, 227, 20.
4 Song H J, Song J, Ren P. Journal of Marine Science and Engineering, 2020, 8, 1016.
5 Chen G J, Zhang Z Z, Li W L. Modern Chemical Industry, 2021, 41(7), 90 (in Chinese).
陈国晶, 张智嘉, 李万利. 现代化工, 2021, 41(7), 90.
6 Zhou F, Zhang J, Xie P F, et al. Chemical Papers, 2020, 74, 1477.
7 Fernandes L, Correia D, Fernández E, et al. ACS Applied Materials & Interfaces, 2020, 12, 42089.
8 Liu H X, Wang H J, Jia W H, et al. Journal of Applied Polymer Science, 2018, 135, 45756.
9 Deng J P, Yang B W, Chen C, et al. ACS Sustainable Chemistry & Engineering, 2015, 3, 599.
10 Han C, Kong L T. Industrial Water & Wastewater, 2021, 52(1), 47 (in Chinese).
韩超, 孔令通. 工业用水与废水, 2021, 52(1), 47.
11 Su Y, Li T, Li A Q. Materials Reports, 2021, 35(4), 4205 (in Chinese).
苏毅, 李婷, 李爱群. 材料导报, 2021, 35(4), 4205.
12 Xue X W, Wang X W, Liu H B, et al. Materials Reports, 2019, 33(S1), 488 (in Chinese).
薛晓武, 王新闻, 刘红波, 等. 材料导报, 2019, 33(S1), 488.
13 Jiang X L, Xu M, Wang M H, et al. European Polymer Journal, 2021, 162, 110893.
14 Ma Y H, Qin R, Xu M, et al. Journal of Applied Polymer Science, 2021, 139, 51453.
15 Jiang X L, Qin R, Wang M H, et al. Polymers for Advanced Technologies, 2021, 32, 2185.
16 Yang Z J, Wang F F, Zhang C, et al. Polymer Chemistry, 2019, 10, 3362.
17 Das M, Naskar K. Polymer, 2021, 237, 124373.
18 Jin C, Sinawang G, Osaki M, et al. Polymers, 2020, 12, 1393.
19 Kee J, Ahn H, Park H, et al. Langmuir, 2021, 37, 13998.
20 Meng L D, Zheng H W, Wu X N, et al. China Coatings, 2021, 36(6), 24 (in Chinese).
孟令岽, 郑红伟, 吴喜娜, 等. 中国涂料, 2021, 36(6), 24.
21 Jiang H. Study on the influence of hard segment molecular structure on the sound isolation of polyurethane. Master's Thesis, Harbin Engineering University, China, 2020 (in Chinese).
姜浩. 聚氨酯硬段分子结构对其隔声性能影响研究. 硕士学位论文, 哈尔滨工程大学, 2020.
22 Geng X L. Preparation and application of functional high oil absorption resins. Master's Thesis, Harbin Engineering University, China, 2021 (in Chinese).
耿孝岭. 功能性高吸油树脂的制备及应用研究. 硕士学位论文, 哈尔滨工程大学, 2021.