植物纤维增强树脂基复合材料界面纳米化改性的研究进展及应用

doi:10.11896/cldb.21100069

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (9544KB)
Export: BibTeX | EndNote (RIS)

Abstract Natural fiber is a biodegradable material with a wide range of sources and low price, which could effectively relieve the environmental pressure when used in place of traditional synthetic fiber to reinforce composites. However, there is an obvious limitation in the wide application of plant fiber reinforced composites due to the mismatched polarity between natural fiber matrix and resin. Effectively optimized interfacial adhesion between natural fibers and polymer matrix could be achieved by interface modification, with comprehensive properties of the composites improved. It is reported that traditional physical modification and chemical modification could damage the plant fiber and affect the mechanical properties of the composites. Thus, this paper reviews the research progress on the interfacial nano-modification with mid reaction conditions of natural fiber reinforced composites in recent years. Firstly, we introduces the physical structure and chemical composition of natural fibers briefly. Secondly, it is necessary to describe the interfacial nano-modification methods of natural fiber reinforced composites in detail. Finally, the interfacial characterization methods and practical applications of natural fiber reinforced composites are illustrated, and the future development trend about the interface modification of natural fiber reinforced composites are prospected reasonably.

Key words： natural fiber composite material nanometer modification interfacial characterization

Published: 25 April 2023 Online: 2023-04-24

CLC number:

TB332

Fund:National Natural Science Foundation of China (52175329).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Yun
	LIU Xuan
	CUI Yihua
	YU Tong
	WU Kangle
	PAN Lei

Cite this article:

YANG Yun,LIU Xuan,CUI Yihua, et al. Research Progress and Application of Interfacial Nano-modification on Natural Fiber Reinforced Resin Matrix Composites[J]. Materials Reports, 2023, 37(8): 21100069-11.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21100069 OR http://www.mater-rep.com/EN/Y2023/V37/I8/21100069

1 Yi X S, Li Y. Bio-sourced resins, plant fibers and biocomposites, China Building Materials Press, China, 2017 (in Chinese).
益小苏, 李岩.生物质树脂、纤维及生物复合材料, 中国建材工业出版社, 2017.
2 Li Y, Mai Y W, Ye L. Composites Science and Technology, 2000, 60(11), 2037.
3 Gurunathan T, Mohanty S, Nayak S K. Composites Part A: Applied Science and Manufacturing, 2015, 77, 1.
4 Yang X G, Wu Q L. Interfacial behaviours in composites, Chemical Industry Press, China, 2019 (in Chinese).
杨序纲, 吴琪琳.复合材料的界面行为, 化学工业出版社, 2019.
5 Bledzki A, Gassan J.Progress in Polymer Science, 1999, 24(2), 221.
6 Baiardo M, Frisoni G, Scandola M, et al. Journal of Applied Polymer Science, 2002, 83(1), 38.
7 Park S, Seo M, Ma T, et al. Journal of Colloid and Interface Science, 2002, 252(1), 249.
8 Marais S, Gouanvé F, Bonnesoeur A, et al. Composites Part A: Applied Science and Manufacturing, 2005, 36(7), 975.
9 Le-Troedec M, Rachini A, Peyratout C. Composites Part B: Engineering, 2018, 133, 210.
10 Cai M, Takagi H, Nakagaito A N, et al. Composites Part A: Applied Science and Manufacturing, 2016, 90, 589.
11 Orue A, Jauregi A, Unsuain U, et al. Composites Part A: Applied Science and Manufacturing, 2016, 84, 186.
12 Liu X. Study of multi-phase interfaces for n-SiO₂@jute fiber/PP compo-sites. Ph.D. Thesis, Nanjing University of Aeronautics and Astronautics, China, 2021 (in Chinese).
刘璇. n-SiO₂@黄麻纤维/PP复合材料的多相界面研究. 博士学位论文, 南京航空航天大学, 2021.
13 Pereira P H F, Rosa M D, Cioffi M O H, et al. Polimeros-ciencia e Tecnologia, 2015, 25(1), 9.
14 Thomason J L, Rudeiros-Fernandez J L. Composites Part A: Applied Science and Manufacturing, 2021, 147, 106478.
15 Charlet K, Baley C, Morvan C, et al. Composites Part A: Applied Science and Manufacturing, 2007, 38(8), 1912.
16 Shen H R, Yu W D. Plant Fiber Sciences in China, 2008, 30(1), 33 (in Chinese).
沈海蓉, 于伟东. 中国麻业科学, 2008, 30(1), 33.
17 Lu B, Zhang L W, Zeng J C,et al. Natural fiber composite materials, Chemical Industry Press, China, 2005 (in Chinese).
鲁博, 张林文, 曾竟成, 等. 天然纤维复合材料, 化学工业出版社, 2005.
18 Yu W D. Textile materials science, China Textile & Apparel Press, China, 2008 (in Chinese).
于伟东. 纺织材料学, 中国纺织出版社, 2008.
19 Liu Z G, Gao Y, Jin H, et al. China Measurement & Test, 2015, 41(2), 38 (in Chinese).
刘治刚, 高艳, 金华, 等. 中国测试, 2015, 41(2), 38.
20 Song P, Zhou F, Li F, et al. Carbohydrate Polymers, 2021, 253, 117207.
21 Zhang M. Study on preparation of nano-SiO₂/jute fiber composite reinforcement via polyelectrolyte method and its modified polypropylene. Master's Thesis, Nanjing University of Aeronautics and Astronautics, China, 2020 (in Chinese).
张邈. 黄麻纤维表面纳米SiO₂的聚电解质法制备及其增强聚丙烯复合材料研究. 硕士学位论文, 南京航空航天大学, 2020.
22 Xia Y Y. Modification of flax fiber reinforced polymer(FFRP) composites and the compressive properties of the confined concrete columns. Ph.D. Thesis, Harbin Institute of Technology, China, 2016 (in Chinese).
夏媛媛. 改性亚麻纤维复合材料及其约束混凝土柱的轴压性能研究. 博士学位论文, 哈尔滨工业大学, 2016.
23 Hu Q X. The flame retardancy and moisture absorption of fiber/polypropylene composites. Master's Thesis, Changchun University of Technology, China, 2017 (in Chinese).
胡求学. 麻纤维/聚丙烯复合材料的阻燃与吸湿性能研究. 硕士学位论文, 长春工业大学, 2017.
24 Bai S Y. Regulation mechanism of chemical composition of hemp fiber on its mechanical properties. Master's Thesis, Tianjin polytechnic University, China, 2017 (in Chinese).
白肃跃. 洋麻纤维化学成分对其力学性能的调控机理探究. 硕士学位论文, 天津工业大学,2017.
25 Liu X, Cui Y H, Lee K L S, et al.Composites Science and Technology, 2020, 188, 107987.
26 Liu X, Cui Y H, Hao S J, et al. Composites Part A: Applied Science and Manufacturing, 2018, 109, 368.
27 Patterson B A, Sodano H A. ACS Applied Materials & Interfaces, 2016, 8(49), 33963.
28 Wang B, Duan Y G, Zhang J J. Applied Surface Science, 2016, 389, 96.
29 Foruzanmehr M, Vuillaume P Y, Elkoun S, et al. Materials & Design, 2016, 106, 295.
30 Prasad V, Sekar K, Joseph M A. Polymer Testing, 2020, 91, 106784.
31 Cheng H T. Enhancement of interfacial adhesion between bamboo fiber and thermoplastic polymer by calcium carbonate deposition in situ on bamboo fiber. Ph.D. Thesis, Chinese Academy of Forestry, China, 2016 (in Chinese).
程海涛. 竹纤维表面CaCO₃改性及增强竹塑复合材料界面研究. 博士学位论文, 中国林业科学研究院, 2016.
32 Zhang S, Zhang F, Pan Y, et al. RSC Advances, 2018, 8(11), 5678.
33 Ma Y B. Modification of polypropylene-based wood-plastic composites by using inorganic nano-fillers. Master's Thesis, South China University of Technology, China, 2020 (in Chinese).
马源彬. 基于无机纳米填料的聚丙烯基木塑复合材料改性研究. 硕士学位论文, 华南理工大学, 2020.
34 Liao Y J, Wu X L.Engineering Plastics Application, 2018, 46(7), 101(in Chinese).
廖益均, 吴晓莉. 工程塑料应用, 2018, 46(7), 101.
35 Huang Z M, Zhang Y Z, Kotaki M. Composites Science and Technology, 2003, 63(15), 2223.
36 Huang H G.Acta Materiae Compositae Sinica, 2015, 32(3), 625 (in Chinese).
黄怀国.复合材料学报, 2015, 32(3), 625.
37 Zhang K M, Xie T, Zhao Y, et al. Materials Reports B: Research Papers, 2018, 32(12), 4370.
张靠民, 谢涛, 赵焱, 等. 材料导报:研究篇, 2018, 32(12), 4370.
38 Deng B Y, Wei Q F, Gao W D, et al.Polymer Materials Science and Engineering, 2007, 23(6), 101 (in Chinese).
邓炳耀, 魏取福, 高卫东, 等. 高分子材料科学与工程, 2007, 23(6), 101.
39 Miao D G, Hu H W, Li A S, et al. Ceramics International, 2015, 41(7), 9177.
40 Ye X Z, Wang H, Zheng K, et al.Composites Science and Technology, 2016, 124, 1.
41 Bian H G, Zhang M, Han D S, et al. China Rubber Industry, 2021, 68(2), 109 (in Chinese).
边慧光, 张萌, 韩德上, 等. 橡胶工业, 2021, 68(2), 109.
42 Prasad V, Sekar K, Joseph M A.Construction and Building Materials, 2021, 284, 122803.
43 Rahman M M, Rahman M R, Hamdan S.Journal of Vinyl and Additive Technology, 2015, 25(2), 123.
44 Liu X, Cui Y H. Composite Structures, 2021, 267, 13865.
45 Liu X, Hao S J, Cui Y H, et al.Journal of Industrial Textiles, 2020, 49(7), 906.
46 Foruzanmehr M, Vuillaume P Y, Elkoun S, et al. Materials & Design, 2016, 106, 295.
47 Lee S H, Wang S Q, Pharr G M, et al. Holzforschung, 2007, 61, 254.
48 Ahmet C K, Serhan K, Yasemin S, et al. Composites Part B: Enginee-ring, 2018, 140, 1.
49 Zhao Z B, Teng K Y, Li N, et al. Composite Structures, 2017, 159, 761.
50 Mayer C, Foulon L, Denoual C, et al. Industrial Crops & Products, 2021, 167, 113482.
51 Makyla K, Muller C, Lorcher S, et al. Advanced Materials, 2013, 25(19), 2701.
52 József K K, Haroon M, Alessandro P. Progress in Materials Science, 2015, 73, 1.
53 Liu X. Effect of ramie fiber surface modification on mechanical properties of ramie fiber composites. Master's Thesis, Tianjin Polytechnic University, China, 2016 (in Chinese).
刘璇. 苎麻纤维表面改性对其复合材料力学性能影响的研究. 硕士学位论文, 天津工业大学, 2016.
54 Zhang X C. Degumming technology of cotton stalk bast fibers and its analysis of degumming effect. Master's Thesis, Dalian Polytechnic University, China, 2012 (in Chinese).
张晓岑. 棉秆皮脱胶技术及其脱胶效果分析. 硕士学位论文, 大连工业大学, 2012.
55 Ibraheem S A, Sreenivasan S S, Abdan K, et al. BioResources, 2016, 11(4), 8968.
56 Li J. Cryogenic interfacial properites of attapulgite-graphene oxide/carbon fiber composites. Master's Thesis, Harbin Institute of Technology, China, 2018 (in Chinese).
李君. 凹凸棒土-氧化石墨烯/碳纤维复合材料低温界面性能研究. 硕士学位论文, 哈尔滨工业大学, 2018.
57 Li Y, Chen C, Xu J, et al.Journal of Materials Science, 2015, 50, 1117.
58 Zhang H K, Wang C H, Zuo Q, et al. Acta Materiae Compositae Sinica, 2022, 39(5), 2153(in Chinese).
张洪康, 王春红, 左祺, 等. 复合材料学报, 2022, 39(5), 2153.
59 Qian B Z. Synthetic Fiber in China, 2021, 50(1), 57(in Chinese).
钱伯章. 合成纤维, 2021, 50(1), 57.
60 Wang H B, Fan J, Liu F S, et al. New Building Materials, 2013, 40(1), 52 (in Chinese).
王宏斌, 范军, 刘福胜, 等. 新型建筑材料, 2013, 40(1), 52.