METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Microstructure Evolution and Mechanical Properties of TC4 Alloy Prepared by Electron Beam Cold Hearth Furnace During Rolling Process |
WANG Wei1,2, WANG Meng1, CAI Jun1, ZHANG Haoze2,3, SHI Yaming2, ZHANG Xiaofeng2, HUANG Haiguang2, WANG Kuaishe1
|
1 School of Metallurgical Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China 2 Yunnan Titanium Industry Co., Ltd, Chuxiong 651209, China 3 School of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, China |
|
|
Abstract In this investigation, the effects of the different deformation degree and temperatures on the microstructure evolution and mechanical properties of TC4 titanium alloy fabricated by electron beam cold hearth melting (EBCHM) were investigated. The experimental results showed that as the deformation degree increased at the same temperature, the volume fractions and sizes of α phase were decreased while the volume fractions of β phase were increased, and the ultimate tensile strength (UTS) and ductility of this alloy were both increased. When the deformation degree was 30%, all the microstructures with different temperature were presented lamellar structures. As the deformation temperatures increased, the sizes of lamellar α phases were decreased and the UTS of this alloy were gradually increased while the ductility was changed a little. When the defor-mation degree was 90%, as the deformation temperatures increased the microstructures were changed from strong B textures (0002)〈1120〉 into T texture(1010)〈1120〉 and a small amount of pyramid texture(1011)〈1120〉, the plastic deformation was dominated by the cylindrical slip system and the base slip system. The sizes of α phase were decreased while the volume fractions of β phase were increased in these microstructures, and the UTS and ductility of this alloy were both increased. When the temperature increased to 1 000 ℃, α phases were fully transformed into β phases, the fine-secondary acicular α phases were precipitated from β phase matrix and the UTS and ductility of this alloy were both increased.
|
Published: 10 May 2021
|
|
Fund:65th batch of the China Postdoctoral Research Project (2019M653571). |
About author:: Wei Wang received his Ph.D. degree in materials processing engineering from Northwestern Polytechnical University (NWPU) in Sep. 2015. He served in School of Metallurgical Engineering, Xi'an University of Architecture and Technology (XAUAT) till now. And he is currently a associate professor and doctoral supervisor. He serves as a reviewer for several academic journals. He has published more than 50 journal papers as the first author. |
|
|
1 Chen Z H. Titanium and titanium alloys, Chemical Industry Press, China,2005(in Chinese). 陈振华.钛与钛合金,化学工业出版社,2005. 2 Liu Q L. Study on the solidification process control of super-long and ultra-thin TA1 and TC4 slab in electron beam cold bed furnace. Master's Thesis, Kunming University of Science and Technology, China,2018(in Chinese). 刘千里.电子束冷床炉熔铸超长超薄TA1及TC4扁锭凝固过程控制研究.硕士学位论文,昆明理工大学,2018. 3 Zhang Y M, Sun J, Han M C, et al. Aerospace Materials&Technology,2007,37(5),50(in Chinese). 张英明,孙军,韩明臣,等.宇航材料工艺,2007,37(5),50. 4 Duan J W. Nonferrous Metals Processing,2011,40(1),41(in Chinese). 段军伟.有色金属加工,2011,40(1),41. 5 Liu L. Studies on defects and influence factors of smelting large-size pure titanium slabs in electron beam cold bed. Master's Thesis,Kunming University of Science and Technology, China,2015(in Chinese). 刘路.电子束冷床熔炼大规格纯钛扁锭的缺陷及其影响因素研究.硕士学位论文,昆明理工大学,2015. 6 Huang H G, Cao Z Y, Li Z M, et al. Hot Working Technology,2015,44(7),137(in Chinese). 黄海广,曹占元,李志敏,等.热加工工艺,2015,44(7),137. 7 Li Y X, Yang L. Metal World,2016,183(1),41(in Chinese). 李育贤,杨丽.金属世界,2016,183(1),41. 8 Martinez F, Murr L E, Ramirez A, et al. Materials Science and Enginee-ring A,2007,454(455),581. 9 Chen H M, Zang Q H, Zhang J, et al. Special Casting & Nonferrous Alloys,2015,35(10),1012(in Chinese). 陈洪美,臧千昊,张静,等.特种铸造及有色合金,2015,35(10),1012. 10 Li W Y, Liu J R, Chen Z Y, et al. Chinese Journal of Materials Research,2018,32(6),455(in Chinese). 李文渊,刘建荣,陈志勇,等.材料研究学报,2018,32(6),455. 11 Du B, Tang Z H, Yun H Y, et al. Hot Working Technology,2018,47(23),34(in Chinese). 杜彬,唐增辉,韵海鹰,等.热加工工艺,2018,47(23),34. 12 Feng Q Y, Zhang L, Pang H, et al. Heat Treatment of Metals,2016,41(6),85(in Chinese). 冯秋元,张磊,庞洪,等.金属热处理,2016,41(6),85. 13 Yang H P, Wang Y M, Li Z Y. Rare Metal Materials and Engineering,2017,46(9),2655(in Chinese). 杨换平,王耀勉,李治阳.稀有金属材料与工程,2017,46(9),2655. 14 Ahmadian P, Abbasi S M, Morakabati M. Materials Today Communications,2017,13,332. 15 Williams J, Baggerly R, Paton N. Metallurgical and Materials Transactions A,2002,33(13),837. 16 Xu W J, Tan Y Q, Gong L H, et al. Rare Metal Materials and Enginee-ring,2016,45(11),2932(in Chinese). 徐戊矫,谭玉全,龚利华,等.稀有金属材料与工程,2016,45(11),2932. 17 Seshacharyulu T, Medeiros S C, Morgan J T, et al. Materials Science and Engineering: A,2000,279,289. 18 Contieri R J, Zanotello M, Caram R. Materials Science and Engineering: A,2010,527(16-17),3994. 19 Kim J S, Chang Y W, Chong S L. Metallurgical and Materials Transactions A,1998,29(1),217. 20 Cui Z Q, Qin Y C. Metallurgy and heat treatment, Machinery Industry Press,2007(in Chinese). 崔忠圻,覃耀春.金属学与热处理,机械工业出版社,2007. 21 Bridier F, Villechaise P, Mendez J. Acta Materialia,2005,53(3),555. 22 Ambard A, Guetaz L, Louchet F, et al. Materials Science and Enginee-ring: A,2001,(319-321),404. 23 Peters M, Lütjering G. In: Titanium'80-Science and Technology. New York,1980,pp.295. 24 Philippe M J, Esling C, Hocheid B. Textures & Microstruct,1988,7(4),265. 25 Wu Z, Yin B, Curtin W A. Acta Materialia,2016,119,203. 26 Gey N, Humbert M, Philippe M J, et al. Mater Science and Engineering A,1996,219,80. 27 Wu R X. Texture evolution and anisotropy of TC1 titanium alloy. Master's Thesis,Shenyang University of Aeronautics and Astronautics, China,2011(in Chinese). 吴汝筱.TC1钛合金织构演变与各向异性研究.硕士学位论文,沈阳航空航天大学,2011. 28 Florent B, David L M, Patrick V, et al. International Journal of Plasticity,2009,25,1066. |
|
|
|