Please wait a minute...
材料导报  2018, Vol. 32 Issue (20): 3618-3622    https://doi.org/10.11896/j.issn.1005-023X.2018.20.022
  金属与金属基复合材料 |
考虑级配颗粒物质间接触力力链的分布概率分析
常明丰1, 裴建中2, 黄平明3, 熊锐1
1 长安大学材料科学与工程学院,西安 710061;
2 长安大学特殊地区公路工程教育部重点实验室,西安 710064;
3 长安大学公路学院,西安 710064;
Analysis on the Distribution Probability of Force Chain of Contact Force Among Granular Matter Considering Gradation
CHANG Mingfeng1, PEI Jianzhong2, HUANG Pingming3, XIONG Rui1
1 School of Materials Science and Engineering, Chang’an University, Xi’an 710061;
2 Key Laboratory for Special Area Highway Engineering of Ministry of Education, Chang’an University, Xi’an 710064;
3 School of Highway, Chang’an University, Xi’an 710064;
下载:  全 文 ( PDF ) ( 2168KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 为了揭示颗粒物质间接触力力链的分布规律,选取10 mm、13 mm、16 mm、19 mm和20 mm五组粒径的刚性颗粒进行复写纸压痕试验,利用概率分析方法研究了单一粒径和考虑级配不同粒径颗粒体内部接触力力链的分布概率。研究结果表明:两种单一粒径的法向力与平均法向力比值f的分布概率呈先增大达到峰值后减小的趋势,分布概率达到峰值处所对应的f值接近1;10 mm颗粒的分布概率曲线所产生的误差较小,20 mm颗粒的分布概率曲线产生的误差相对较大;考虑级配的颗粒体,其分布概率均呈指数形式单调衰减,未出现分布概率峰值,并且强力链比例基本小于10 mm和20 mm的单一粒径颗粒体。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
常明丰
裴建中
黄平明
熊锐
关键词:  颗粒物质  接触力力链  压痕试验  分布概率  级配    
Abstract: 10 mm,13 mm,16 mm,19 mm and 20 mm rigid particles were selected to conduct the indentation test to reveal the distribution laws of the force chains of contact force among granular matter. And the distribution probability of the force chains of contact force was studied by the probabilistic analysis method for the granular materials with single particle size and different particle sizes consideration gradation. The results showed that the distribution probabilities of f, which was the ratio of normal force to ave-rage normal force, increased first and then decreased after exceeding the peak value with the increase of f for 10 mm and 20 mm particles. The corresponding f was close to 1 at the peak values of distribution probability. The errors of distribution probability curve of 10 mm particles were smaller. However, the errors of distribution probability curve of 20 mm particles were relatively large. The distribution probabilities of the granular materials considering gradation decay exponentially, and there was no peak of distribution probability. In addition, the proportions of the strong force chains were less than those of 10 mm and 20 mm granular materials basically.
Key words:  granular matter    force chain of contact force    indentation test    distribution probability    gradation
               出版日期:  2018-10-25      发布日期:  2018-11-22
ZTFLH:  U414  
基金资助: 国家自然科学基金(51408047;51378073;51608046);中央高校基本科研业务费专项资金(310831161002)
作者简介:  常明丰:男,1982年生,博士,讲师,研究方向为沥青混合料的细观力学及数值模拟 E-mail:mfchang99@126.com
引用本文:    
常明丰, 裴建中, 黄平明, 熊锐. 考虑级配颗粒物质间接触力力链的分布概率分析[J]. 材料导报, 2018, 32(20): 3618-3622.
CHANG Mingfeng, PEI Jianzhong, HUANG Pingming, XIONG Rui. Analysis on the Distribution Probability of Force Chain of Contact Force Among Granular Matter Considering Gradation. Materials Reports, 2018, 32(20): 3618-3622.
链接本文:  
http://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2018.20.022  或          http://www.mater-rep.com/CN/Y2018/V32/I20/3618
1 Majmudar T S, Behringer R. Contact force measurements and stress-induced anisotropy in granular materials[J]. Nature,2005,435:1079.
2 Ostojic S, Somfai E, Nienhuis B. Scale invariance and universality of force networks in static granular matter[J]. Nature,2006,439:828.
3 Jung Y H, Jung J W. Visualizing force chain buckling in stress and displacement fields of granular assembly using photoelastic measurement[C]∥Murad Abu-Farsakh. Geo-Congress 2014 Technical Papers: Geo-Characterization and Modeling for Sustainability. Reston: American Society of Civil Engineers,2014:751.
4 Tordesillas A, O’Sullivan P, Walker D M, et al. Evolution of functional connectivity in contact and force chain networks feature vectors, k-cores and minimal cycles[J]. Comptes Rendus Mecanique,2010,338:556.
5 Tordesillas A, Muthuswamy M. On the modeling of confined buckling of force chains[J]. Journal of the Mechanics and Physics of So-lids,2009,57:706.
6 Rattanadit K, Bobaru F, Promratana K, et al. Force chains and re-sonant behavior in bending of a granular layer on an elastic support[J]. Mechanics of Materials,2009,41:691.
7 Liu C H, Nagel S R, Schecter D A, et al. Force fluctuations in bead packs[J]. Science,1995,269(5223):513.
8 Mueth D M, Jaeger H M, Nagel S R. Force distribution in a granular medium[J]. Physical Review E,1998,57:3164.
9 Blair D L, Mueggenburg N W, Marshall A H, et al. Force distributions in 3D granular assemblies: Effects of packing order and inter-particle friction[J]. Physical Review E,2001,63(4):041304.
10 Mueggenburg N W, Jaeger H M, Nagel S R. Stress transmission through three-dimensional ordered granular arrays[J]. Physical Review E,2002,66(3):031304.
11 Jiang Jun, Xu Zhenghong, Xu Lingfeng. Buckling deformation of force chain of granular material [J]. Journal of Zhejiang University(Engineering Science),2010,44(10):1931(in Chinese).
蒋军,徐正红,徐凌峰.颗粒体材料中的力链压曲变形[J].浙江大学学报(工学版),2010,44(10):1931.
12 Sun Qicheng, Jin Feng, Wang Guangqian. The multiscale structure of dense granular matter[J]. Mechanics in Engineering,2010,32(1):10(in Chinese).
孙其诚,金峰,王光谦.密集颗粒物质的多尺度结构[J].力学与实践,2010,32(1):10.
13 Sun Qicheng, Jin Feng, Wang Guangqian, et al. Force chains in a uniaxially compressed static granular matter in 2D [J]. Acta Physica Sinica,2010,59(1):30(in Chinese).
孙其诚,金峰,王光谦,等.二维颗粒体系单轴压缩形成的力链结构[J].物理学报,2010,59(1):30.
14 Bi Zhongwei, Sun Qicheng, Liu Jianguo, et al. Development of shear band in a granular material in biaxial tests [J]. Acta Physica Sinica,2011,60(3):1(in Chinese).
毕忠伟,孙其诚,刘建国,等.双轴压缩下颗粒物质剪切带的形成与发展[J].物理学报,2011,60(3):1.
15 Bi Zhongwei, Sun Qicheng, Liu Jianguo, et al. The quasistatic response of a granular matter to a localized loading [J]. Mechanics in Engineering,2011,33(1):10(in Chinese).
毕忠伟,孙其诚,刘建国,等.点载荷作用下密集颗粒物质的传力特性分析[J].力学与实践,2011,33(1):10.
16 Li Wanyi, Zeng Pan, Lei Liping, et al. Simulation based on discrete element method and experiment on flow and packing behavior of particles [J]. Mechanics in Engineering,2012,34(1):20(in Chinese).
李婉宜,曾攀,雷丽萍,等.离散颗粒流动堆积行为离散元模拟及实验研究[J].力学与实践,2012,34(1):20.
17 Chang Mingfeng, Huang Pingming, Pei Jianzhong, et al. Quantitative analysis on evolution and distribution of force chain for asphalt mixture using discrete element method[J]. Materials Review B: Research Papers,2017,31(9):155(in Chinese).
常明丰,黄平明,裴建中,等.基于离散元方法的沥青混合料力链演化及分布量化分析[J].材料导报:研究篇,2017,31(9):155.
18 Chang Mingfeng, Huang Pingming, Pei Jianzhong, et al. Quantitative analysis on force chain of asphalt mixture under Haversine loa-ding[J]. Advances in Materials Science and Engineering,2017,2017 (1):1.
19 Radjai F, Wolf D, Jean M, et al. Bimodal character of stress transmission in granular packings[J]. Physical Review Letters,1998,80(1):61.
[1] 胡力群, 贠迪, 杨周晓政. 开级配沥青磨耗层宏观构造特征及其降雨条件下抗滑性能研究*[J]. 《材料导报》期刊社, 2017, 31(8): 113-117.
[1] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[2] Huimin PAN,Jun FU,Qingxin ZHAO. Sulfate Attack Resistance of Concrete Subjected to Disturbance in Hardening Stage[J]. Materials Reports, 2018, 32(2): 282 -287 .
[3] Siyuan ZHOU,Jianfeng JIN,Lu WANG,Jingyi CAO,Peijun YANG. Multiscale Simulation of Geometric Effect on Onset Plasticity of Nano-scale Asperities[J]. Materials Reports, 2018, 32(2): 316 -321 .
[4] Xu LI,Ziru WANG,Li YANG,Zhendong ZHANG,Youting ZHANG,Yifan DU. Synthesis and Performance of Magnetic Oil Absorption Material with Rice Chaff Support[J]. Materials Reports, 2018, 32(2): 219 -222 .
[5] Ninghui LIANG,Peng YANG,Xinrong LIU,Yang ZHONG,Zheqi GUO. A Study on Dynamic Compressive Mechanical Properties of Multi-size Polypropylene Fiber Concrete Under High Strain Rate[J]. Materials Reports, 2018, 32(2): 288 -294 .
[6] XU Zhichao, FENG Zhongxue, SHI Qingnan, YANG Yingxiang, WANG Xiaoqi, QI Huarong. Microstructure of the LPSO Phase in Mg98.5Zn0.5Y1 Alloy Prepared by Directional Solidification and Its Effect on Electromagnetic Shielding Performance[J]. Materials Reports, 2018, 32(6): 865 -869 .
[7] ZHOU Rui, LI Lulu, XIE Dong, ZHANG Jianguo, WU Mengli. A Determining Method of Constitutive Parameters for Metal Powder Compaction Based on Modified Drucker-Prager Cap Model[J]. Materials Reports, 2018, 32(6): 1020 -1025 .
[8] WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing[J]. Materials Reports, 2017, 31(1): 64 -71 .
[9] HUANG Dajian, MA Zonghong, MA Chenyang, WANG Xinwei. Preparation and Properties of Gelatin/Chitosan Composite Films Enhanced by Chitin Nanofiber[J]. Materials Reports, 2017, 31(8): 21 -24 .
[10] YUAN Xinjian, LI Ci, WANG Haodong, LIANG Xuebo, ZENG Dingding, XIE Chaojie. Effects of Micro-alloying of Chromium and Vanadium on Microstructure and Mechanical Properties of High Carbon Steel[J]. Materials Reports, 2017, 31(8): 76 -81 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed