Please wait a minute...
《材料导报》期刊社  2018, Vol. 32 Issue (4): 549-554    https://doi.org/10.11896/j.issn.1005-023X.2018.04.008
  材料研究 |
电化学诱导表面引发原子转移自由基聚合构筑离子型聚醚砜膜功能表面
吴家宇1, 李丹1, 康龙1, 2, 冉奋1, 2
1 兰州理工大学材料科学与工程学院,兰州 730050;
2 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室,兰州 730050
Construction of Ion-type Functional Surface of Polyethersulfone Membrane via Surface-initiated Electrochemical-mediated Atom Transfer Radical Polymerization(SI-eATRP)
WU Jiayu1, LI Dan1, KANG Long1, 2, RAN Fen1, 2
1 College of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050;
2 State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou 730050
下载:  全 文 ( PDF ) ( 2630KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 采用电化学诱导表面引发原子转移自由基聚合(SI-eATRP)技术,在涂覆聚多巴胺的聚醚砜膜基底上接枝离子型聚合物分子刷聚对苯乙烯磺酸钠,并通过单体浓度对聚合物分子刷进行调控。采用SEM、AFM、XPS、水接触角等表征方法对改性聚醚砜膜的结构和性能进行表征;采用水通量对其进行滤过性能测定。结果表明:成功地在改性聚醚砜膜表面接枝离子型聚合物分子刷聚对苯乙烯磺酸钠;聚合物刷相互缠结形成了球状颗粒;随着电化学诱导体系中单体浓度的增大,聚合物分子刷的接枝量增加,同时水接触角显著降低;聚合物膜表面离子型分子刷的构筑改善了亲水性,因此其纯水通量明显增加,牛血清白蛋白(BSA)截留率和通量恢复率都得到了提高。SI-eATRP用于聚合物膜材料的表面改性和调控,在生物相容性膜等领域具有潜在的应用前景。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
吴家宇
李丹
康龙
冉奋
关键词:  聚合物膜  表面改性  SI-eATRP  聚合物刷  聚合物合金    
Abstract: The polymer brushes of poly(sodium p-styrenesulfonate hydrate) was introduced onto polyethersulfone membrane by coating poly(dopamine) and grafting poly(sodium p-styrenesulfonate hydrate) via surface-initiated electrochemical-mediated atom transfer radical polymerization(SI-eATRP), and the monomer concentration was used to adjust the amount of polymer brush. The structure and properties of the modified membrane were characterized by SEM, AFM, XPS, and water contact angle, and the filtration performance was measured by water flux. The results showed that poly(sodium p-styrenesulfonate hydrate) chains were successfully grafted onto the membrane surface, and polymer brushes were tangled to form spherical particles. With the increase of monomer concentration in the electrochemical induced system, the amount of grafting polymer brush increased, thus the water contact angle decreased significantly. The hydrophilicity of the ionic membrane improved, which contributed to the obvious increase of water flux. The BSA rejection rate and flux recovery rate performance have been improved. SI-eATRP method used for surface modification and regulation of polymer film materials has potential application prospects in biocompatible membranes.
Key words:  polymer membrane    surface modification    surface-initiated electrochemical-mediated atom transfer radical polymerization    polymer brushes    polymer blend
出版日期:  2018-02-25      发布日期:  2018-02-25
ZTFLH:  TB342  
  TQ316.3  
基金资助: 国家自然科学基金(51203071; 51363014; 51463012; 51763014); 博士后科学基金(2014M552509; 2015T81064); 甘肃省自然科学基金(1506RJZA098); 兰州理工大学红柳杰出人才计划(J201402)
通讯作者:  冉奋:,男,1978年生,博士,副教授,主要从事高分子能源及医用材料研究 E-mail:ranfen@163.com   
作者简介:  吴家宇:男,1991年生,硕士,主要研究方向为生物医用高分子材料
引用本文:    
吴家宇, 李丹, 康龙, 冉奋. 电化学诱导表面引发原子转移自由基聚合构筑离子型聚醚砜膜功能表面[J]. 《材料导报》期刊社, 2018, 32(4): 549-554.
WU Jiayu, LI Dan, KANG Long, RAN Fen. Construction of Ion-type Functional Surface of Polyethersulfone Membrane via Surface-initiated Electrochemical-mediated Atom Transfer Radical Polymerization(SI-eATRP). Materials Reports, 2018, 32(4): 549-554.
链接本文:  
https://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2018.04.008  或          https://www.mater-rep.com/CN/Y2018/V32/I4/549
1 Peppas N A, Langer R. New challenges in biomaterials[J].Science,1994,263(5154):1715.
2 He S M, Zhou J. Anticoagulant biomaterials[J].Progess in Chemistry,2011,22(4):760(in Chinese).
何淑漫,周健.抗凝血生物材料[J].化学进展,2011,22(4):760.
3 Zhu Liping. Structure-controllable fabrication and surface modification of poly(ether sulfone) and poly(phthalazinone ether sulfone ketone) porous membranes[D].Hangzhou:Zhejiang University,2007(in Chinese).
朱利平.聚醚砜、聚醚砜酮多孔膜的结构可控制备及其表面改性[D].杭州:浙江大学,2007.
4 Zhao C S, Liu X D, Rikimaru S, et al. Surface characterization of polysulfone membranes modified by DNA immobilization[J].Journal of Membrane Science,2003,214(2):179.
5 Nie S M, Mao J K, Shen X Y. Compatibility of PQA-co-AN/PES blend solution and properties of blend menbrane[J].Materials Review B:Research Papers,2011,26(6):13(in Chinese).
倪士民,毛健康,沈新元.季铵盐共聚物/聚醚砜相容性及其共混膜性能研究[J].材料导报:研究篇,2011,26(6):13.
6 Gastaldello K, Melot C, Kahn R J, et al. Comparison of cellulose diacetate and polysulfone membranes in the outcome of acute renal failure. A prospective randomized study[J].Nephrology Dialysis Transplantation,2000,15(2):224.
7 Pappas P J, Hobson R W, Meyers M G, et al. Patency of infrainguinal polytetrafluoroethylene bypass grafts with distal interposition vein cuffs[J].Cardiovascular Surgery,1998,6(1):19.
8 Tamada Y. Sulfation of silk fibroin by sulfuric acid and anticoagulant activity[J].Journal of Applied Polymer Science,2003,87(5):2377.
9 Goosen M F A, Sablani S S, Al-Hinai H, et al. Fouling of reverse osmosis and ultrafiltration membranes: A critical review[J].Separation Science and Technology,2004,39(10):2261.
10 Takeoka Y, Aoki T, Sanui K, et al. Electrochemical control of drug release from redox-active micelles[J].Journal of Controlled Release,1995,33(1):79.
11 Zhou F, Shu W, Welland M E, et al. Topography printing to locally control wettability[J].Journal of the American Chemical Society,2006,128(24):5326.
12 Li B, Yu B, Huck W T S, et al. Electrochemically induced surface-initiated atom-transfer radical polymerization[J].Angewandte Chemie International Edition,2012,51(21):5092.
13 Li B, Yu B, Zhou F. In situ AFM investigation of electrochemically induced surface-initiated atom-transfer radical polymerization[J].Macromolecular Rapid Communications,2013,34(3):246.
14 Li B, Yu B, Huck W T S, et al. Electrochemically mediated atom transfer radical polymerization on nonconducting substrates: Controlled brush growth through catalyst diffusion[J].Journal of the American Chemical Society,2013,135(5):1708.
15 Haeshin L, Dellatore S M, Miller W M, et al. Mussel-inspired surface chemistry for multifunctional coatings[J].Science,2007,318(5849):426.
16 Xin L, Shao J H, Ge S, et al. Proton conductivity improvement of sulfonated poly(ether ether ketone) nanocomposite membranes with sulfonated halloysite nanotubes prepared via dopamine-initiated atom transfer radical polymerization[J].Journal of Membrane Science,2016,504:206.
17 Zhou R, Ren P F, Yang H C, et al. Fabrication of antifouling membrane surface by poly(sulfobetaine methacrylate)/polydopamine co-deposition[J].Journal of Membrane Science,2014,466:18.
18 Yang H C, Liao K J, Huang H, et al. Mussel-inspired modification of a polymer membrane for ultra-high water permeability and oil-in-water emulsion separation[J].Journal of Material Chemistry A,2014,2:10225.
19 Yavuz E, Bayramoglu G, Senkal B F. Poly(glycidylmethacrylate) brushes generated on poly(CMPS) beads by SI-ATRP technique: Hydrazine and amino groups functionalized for invertase adsorption and purification[J].Journal of Chromatography B,2009,877(14-15):1479.
[1] 温强, 李向成, 花银群, 关庆丰, 蔡杰. 强流脉冲电子束表面改性技术及其在热障涂层改性中的研究进展[J]. 材料导报, 2025, 39(3): 23090070-11.
[2] 屈沅治, 张蝶, 兰雅婧, 任晗, 刘阔, 黄宏军, 梁本亮, 颜鲁婷. 水基钻井液用多元协同纳米润滑剂的研究进展[J]. 材料导报, 2025, 39(2): 23090016-6.
[3] 裴海华, 赵建伟, 郑家桢, 张贵才, 张菅, 蒋平. 改性纳米锂皂石强化高温泡沫调驱性能研究[J]. 材料导报, 2025, 39(2): 22110070-5.
[4] 陈京健, 徐能能, 芦拓, 魏群山. 锌阳极氮掺杂多孔碳表面功能层设计及可逆性研究[J]. 材料导报, 2024, 38(6): 23040217-6.
[5] 李鹏程, 魏嘉佳, 孟昊天, 王文轩, 李佳峻, 李达, 涂秋芬. 静电自组装法构建抗菌抗凝涂层的研究[J]. 材料导报, 2024, 38(14): 23020101-9.
[6] 刘筱涵, 杨培, 周晓燕. 等离子体改性增强农林生物质复合材料界面相容性研究进展[J]. 材料导报, 2024, 38(13): 23030072-11.
[7] 金磊源, 胡芳坤, 姜晓娇, 夏立, 刘冉, 徐佳乐, 涂秋芬, 熊开琴. 基于Notch信号通路抑制剂的多功能血管支架涂层制备及表征[J]. 材料导报, 2024, 38(12): 22120030-8.
[8] 杨长兴, 王固霞, 郭生伟. 油酸改性石墨相氮化碳的制备、表征及摩擦学性能研究[J]. 材料导报, 2023, 37(23): 22100019-7.
[9] 郑洋, 张璇, 卢佳, 何东磊, 宿振宇, 牛伟, 于镇洋, 孙荣禄, 李岩. 医用镁合金体内降解行为与表面改性研究进展[J]. 材料导报, 2023, 37(19): 22020134-16.
[10] 郭远来, 缪婉, 钱继东, 熊开琴, 涂秋芬. “一步法”构建基于Zn2+的抗菌表面[J]. 材料导报, 2023, 37(12): 22030058-6.
[11] 易荣, 王法衡, 刘永财, 李涤尘, 刘亚雄. 聚醚醚酮的表面改性策略综述[J]. 材料导报, 2023, 37(11): 21070057-12.
[12] 孟兆通, 张昌海, 迟庆国, 张天栋. 固体绝缘材料中空间电荷的主要影响因素及抑制方法[J]. 材料导报, 2023, 37(1): 21040316-9.
[13] 梁朝, 李茹春, 李春全, 孙志明, 陈珍明, 郑水林. 硅酸钙表面有机改性和形貌对填充PP复合材料力学性能的影响及机理[J]. 材料导报, 2022, 36(23): 21080298-8.
[14] 鲁春驰, 王影, 王东征. 涂布正极表面丝网印刷氧化锌颗粒对锂离子电池性能的影响[J]. 材料导报, 2022, 36(21): 21050056-5.
[15] 郑皓华, 邓雅洁, 吴志林. 纳米包装材料表面改性技术及包装形态表现研究[J]. 材料导报, 2022, 36(19): 21110079-5.
[1] Lanyan LIU,Jun SONG,Bowen CHENG,Wenchi XUE,Yunbo ZHENG. Research Progress in Preparation of Lignin-based Carbon Fiber[J]. Materials Reports, 2018, 32(3): 405 -411 .
[2] Haoqi HU,Cheng XU,Lijing YANG,Henghua ZHANG,Zhenlun SONG. Recent Advances in the Research of High-strength and High-conductivity CuCrZr Alloy[J]. Materials Reports, 2018, 32(3): 453 -460 .
[3] Yanchun ZHAO,Congyu XU,Xiaopeng YUAN,Jing HE,Shengzhong KOU,Chunyan LI,Zizhou YUAN. Research Status of Plasticity and Toughness of Bulk Metallic Glass[J]. Materials Reports, 2018, 32(3): 467 -472 .
[4] Xinxing ZHOU,Shaopeng WU,Xiao ZHANG,Quantao LIU,Song XU,Shuai WANG. Molecular-scale Design of Asphalt Materials[J]. Materials Reports, 2018, 32(3): 483 -495 .
[5] Yongtao TAN, Lingbin KONG, Long KANG, Fen RAN. Construction of Nano-Au@PANI Yolk-shell Hollow Structure Electrode Material and Its Electrochemical Performance[J]. Materials Reports, 2018, 32(1): 47 -50 .
[6] Ping ZHU,Guanghui DENG,Xudong SHAO. Review on Dispersion Methods of Carbon Nanotubes in Cement-based Composites[J]. Materials Reports, 2018, 32(1): 149 -158 .
[7] Fangyuan DONG,Shansuo ZHENG,Mingchen SONG,Yixin ZHANG,Jie ZHENG,Qing QIN. Research Progress of High Performance ConcreteⅠ:Raw Materials and Mix Proportion Design Method[J]. Materials Reports, 2018, 32(1): 159 -166 .
[8] Guiqin HOU,Yunkai LI,Xiaoyan WANG. Research Progress of Zinc Ferrite as Photocatalyst[J]. Materials Reports, 2018, 32(1): 51 -57 .
[9] Jianxiang DING,Zhengming SUN,Peigen ZHANG,Wubian TIAN,Yamei ZHANG. Current Research Status and Outlook of Ag-based Contact Materials[J]. Materials Reports, 2018, 32(1): 58 -66 .
[10] Jing WANG,Hongke LIU,Pingsheng LIU,Li LI. Advances in Hydrogel Nanocomposites with High Mechanical Strength[J]. Materials Reports, 2018, 32(1): 67 -75 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed