Please wait a minute...
《材料导报》期刊社  2018, Vol. 32 Issue (4): 533-538    https://doi.org/10.11896/j.issn.1005-023X.2018.04.005
  材料研究 |
二水磷酸氢钙包覆镁粉的组织及其在NaCl溶液中的腐蚀行为
王勇1, 谢帅1, 乔丽英1, 刘月1, 赵川2
1 重庆大学材料科学与工程学院,重庆 400044;
2 重庆川仪金属功能材料有限责任公司,重庆 400702
Micro-structure and Properties of Calcium Phosphate Ceramic Coated Magnesium Powder and the Corrosion Performance in NaCl Solution
WANG Yong1, XIE Shuai1, QIAO Liying1, LIU Yue1, ZHAO Chuan2
1 College of Materials Science and Engineering, Chongqing University, Chongqing 400044;
2 Chongqing Chuanyi Metallic Functional Materials Co.Ltd, Chongqing 400702
下载:  全 文 ( PDF ) ( 2159KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 运用液相化学沉积技术制备了二水磷酸氢钙包覆镁粉粉末。利用扫描电镜(SEM)、能谱仪(EDS)、X射线衍射仪(XRD)及傅里叶变换红外光谱仪(FT-IR)分析包覆层特征,用比表面积和孔隙度分析仪测定包覆前后粉末的比表面积,并通过浸泡实验研究包覆粉末的腐蚀行为。结果表明,包覆处理后的镁粉颗粒仍保持球形,表面形成了一层厚度2~4 μm细片状的二水磷酸氢钙(DCPD),与未包覆粉末相比,其比表面积增加约60倍,在3.5%(质量分数)NaCl溶液中的耐腐蚀性能提高四个数量级。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王勇
谢帅
乔丽英
刘月
赵川
关键词:  镁粉  DCPD  包覆粉末  比表面积  腐蚀    
Abstract: Magnesium coated with calcium phosphate were produced via chemical liquid deposition method. The coating were analyzed by scanning electron microscope(SEM), energy dispersive spectrometer (EDS), X-ray diffraction(XRD) and Fourier transform infrared spectroscopy(FT-IR). Accelerated surface area and porosimetry system(ASAP-2020) was used to measure the specific surface area of different powders. The corrosion process of coated and uncoated powders were studied by immersion test. It was shown that the magnesium powder were coated with a layer of dicalcium phosphate dihydrate(DCPD) with thickness of 2—4 μm. The coated particles were spheric, similar to the raw magnesium particles. The specific surface area of coated powder increased by sixty times, compared to uncoated powder, and the corrosion rate of coated powder in 3.5wt% NaCl solution decreased over 4 orders of magnitude.
Key words:  magnesium powder    DCPD    coated powder    specific surface area    corrosion
出版日期:  2018-02-25      发布日期:  2018-02-25
ZTFLH:  TG178  
  R318.08  
基金资助: 重庆市应用开发计划(cstc2014yykfC50002)
作者简介:  王勇:男,1968年生,博士,副教授,主要从事生物材料方面的研究 E-mail:yongwangcqu_1968@163.com
引用本文:    
王勇, 谢帅, 乔丽英, 刘月, 赵川. 二水磷酸氢钙包覆镁粉的组织及其在NaCl溶液中的腐蚀行为[J]. 《材料导报》期刊社, 2018, 32(4): 533-538.
WANG Yong, XIE Shuai, QIAO Liying, LIU Yue, ZHAO Chuan. Micro-structure and Properties of Calcium Phosphate Ceramic Coated Magnesium Powder and the Corrosion Performance in NaCl Solution. Materials Reports, 2018, 32(4): 533-538.
链接本文:  
https://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2018.04.005  或          https://www.mater-rep.com/CN/Y2018/V32/I4/533
1 Yang Huajuan, Yang Ke, Zhang Bingchun. Development and prospect of biomedical stainless steels[J].Materials Review,2005,19(6):56(in Chinese).
杨化娟,杨柯,张炳春.医用不锈钢的发展及展望[J].材料导报,2005,19(6):56.
2 Huang Weijiu, Li Zhaofeng. Research progress in surface modification of biomedical titanium alloy[J].Materials Review,2006,20(s2):369(in Chinese).
黄伟九,李兆峰.医用钛合金表面改性研究进展[J].材料导报,2006,20(s2):369.
3 Li Hongfei. The clinical effects of artifical teeth in aickel-chromium alloy containing titanium, cobalt chromium alloy, high gold alloy porcelain[J].Stomatology,2011,31(10):612(in Chinese).
李鸿飞.含钛镍铬合金、钴铬合金、高金合金烤瓷牙的临床应用比较[J].口腔医学,2011,31(10):612.
4 Witte F. The history of biodegradable magnesium implants: A review[J].Acta Biomaterialia,2010,23(5):1680.
5 Yuan Guangyin, Zhang Jia, Ding Wenjiang. Research progress of Mg-based alloys as degradable biomedical materials[J].Materials China,2011,30(2):44(in Chinese).
袁广银,张佳,丁文江.可降解医用镁基生物材料的研究进展[J].中国材料进展,2011,30(2):44.
6 Liu Guangyi, Tang Shawei, Wang Chuan, et al. Formation characteristic of Ca-P coatings on magnesium alloy surface[J].Transactions of Nonferrous Metals Society of China,2013,23(8):2294.
7 Earl D McBRIDE. Absorbable metal in bone surgery[J].Journal of the American Medical Association,1938,111(27):2464.
8 Dong Hongzhou, Li Qing, Cui Tan, et al. Bi-directional controlled release of ibuprofen and Mg2+ from magnesium alloys coated by multifunctional composite[J].Materials Science & Engineering C-Materials for Biological Applications,2016,68:512.
9 Cheng Zhongji, Lian Jianshe, Hui Yanxian, et al. Biocompatible DCPD coating formed on AZ91D magnesium alloy by chemical deposition and its corrosion behaviors in SBF[J].Journal of Bionic Engineering,2014,11(4):610.
10 Singh S, Kumar R M, Kuntal K K, et al.Sol-gel derived hydroxyapa-tite coating on Mg-3Zn alloy for orthopedic application[J].JOM,2015,67(4):702.
11 Wang H, Chen C Z, Wang D G. Effect of heating rate on structure of HA coating prepared by sol-gel[J].Surface Engineering,2013,25(2):131.
12 Rojaee R, Fathi M, Raeissi K. Electrophoretic deposition of nanostructured hydroxyapatite coating on AZ91 magnesium alloy implants with different surface treatments[J].Applied Surface Science,2013,285:664.
13 Surmeneva M A, Mukhametkaliyev T M, et al. Ultrathin film coa-ting of hydroxyapatite (HA) on a magnesium-calcium alloy using RF magnetron sputtering for bioimplant applications[J].Materials Letters,2015,152:280.
14 Wu Zehong, Wang Yong, Liang Yin, et al. Study on corrosion performance in HBSS of Mg/TCP fabricated through powder metallurgy[J].Development and Application of Materials,2013,28(4):41(in Chinese).
吴泽宏,王勇,梁寅,等.粉末冶金Mg-TCP复合材料生理腐蚀行为研究[J].材料开发与应用,2013,28(4):41.
15 Khalajabadi S Z, Kadir M R A, et al. The effect of MgO on the biodegradation, physical properties and biocompatibility of a Mg/HA/MgO nanocomposite manufactured by powder metallurgy method[J].Journal of Alloys and Compounds,2016,655:266.
16 Chen Fuwen, Yu Kun, Chen Liangjian, et al. Fabrication and corrosion properties of Mg-6%Zn-10%(β-Ca3(PO4)2) composite[J].The Chinese Journal of Nonferrous Metals,2012,22(1):39(in Chinese).
陈福文,余琨,陈良建,等.Mg-6%Zn-10%(β-Ca3(PO4)2)复合材料的制备及腐蚀降解行为[J].中国有色金属学报,2012,22(1):39.
17 Xie Yunping. The investigation of high performance silver tin oxide (AgSnO2)/Cu compound electricity contact material[D].Changsha:College of Materials Science and Engineering of Hunan University,2009(in Chinese).
谢云平.银氧化锡/复合触头材料研究[D].长沙:湖南大学,2009.
18 Fang Qiang. Preparation of rare earth modified cobalt coated WC powder and its spark plasma sintering[D].Harbin:Harbin Institute of Technology,2010(in Chinese).
方强.稀土改性Co包覆WC粉末制备及SPS烧结研究[D].哈尔滨:哈尔滨工业大学,2010.
19 Liu Guanpeng, Guo Xiaode, Duan Hongzhen, et al. New surface coating on Mg powders and their characteristics of reaction with water[J].The Chinese Journal of Nonferrous Metals,2007,17(12):1999(in Chinese).
刘冠鹏,郭效德,段红珍,等.Mg粉的新型包覆处理及其水反应特性[J].中国有色金属学报,2007,17(12):1999.
20 Zhang Hongyan, Wang Jinhua, Wang Lili. Study on silica-coated chromium oxide green pigments prepared by liquid phase method[J].Bulletin of the Chinese Ceramic Society,2014,33(7):173(in Chinese).
张红燕,王进华,王丽丽.液相法制备二氧化硅包覆氧化铬绿色料的研究[J].硅酸盐通报,2014,33(7):173.
21 Huo H W, Li Y, Wang F H. Corrosion of AZ91D magnesium alloy with a chemical conversion coating and electroless nickel layer[J].Corrosion Science,2004,46(6):1467.
22 Zeng Rongchang, Kong Linghong, Xu Su, et al. Study on corrosion of a medical Mg-Li-Ca alloy with calcium phosphate coating[J].Journal of Chongqing University of Technology (Natural Science),2010,24(10):34(in Chinese).
曾荣昌,孔令鸿,许苏,等.医用Mg-Li-Ca合金表面Ca-P涂层腐蚀研究[J].重庆理工大学学报(自然科学版),2010,24(10):34.
23 Casciani F, Condrate R A. The vibrational spectra of brushite, CaHPO4?2H2O[J].Spectroscopy Letters,2006,12(10):699.
24 Petrov I, Soptraja B, Fuson N. Infra-red investigation of dicalcium phosphates[J].Spectrochimica Acta Part A-Molecular Spectroscopy,1967,23(10):2637.
25 Combes C, Rey C, Freche M. XPS and IR study of dicalcium phosphate dihydrate nucleation on titanium surfaces[J].Colloids and Surfaces,1998,11(1-2):15.
26 Liu Chao, Ji Xiujie, Cheng Guoxiang. Template synthesis and cha-racterization of highly ordered lamellar hydroxyapatite[J].Applied Surface Science,2007,253(16):6840.
27 Vereecke G, Lemaitre J. Calculation of the solubility diagrams in the system Ca(OH)2-H3PO4-KOH-HNO3-CO2-H2O[J].Journal of Crystal Growth,1990,104(4):820.
28 Wang Chuan. Microstructure evolution and corrosion mechanism of dicalcium phosphate dihydrate coating on magnesium alloy in SBF[D].Harbin:Harbin Institute of Technology,2009(in Chinese).
王川.镁合金表面二水磷酸氢钙涂层在SBF中的组织演化与腐蚀机制[D].哈尔滨:哈尔滨工业大学,2009.
29 Song G L, Atrens A, StJohn D. An hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys[C]∥Magnesium Technology 2001 Symposium.New Orleans,LA,2001.
30 Liu Ming, Uggowitzer Peter J, Nagasekhar A V, et al. Calculated phase diagrams and the corrosion of die-cast Mg-Al alloys[J].Corrosion Science,2009,51(3):602.
31 Sun Fang, Zhao Zhongwei. Thermodynamic analysis on calcium phosphate system[J].Rare Metals and Cemented Carbides,2006,34(2):35(in Chinese).
孙放,赵中伟.磷酸钙体系热力学分析[J].稀有金属与硬质合金,2006,34(2):35.
32 Gao Jiacheng,Wu Sha,Qiao Liying. Corrosion behavior of magne-sium and its alloy in simulated body fluid[J].Journal of Clinical Rehabilitative Tissue Engineering Research,2007,11(18):3584(in Chinese).
高家成,伍沙,乔丽英.镁及镁合金在仿生体液中的腐蚀降解行为[J].中国组织工程研究与临床康复,2007,11(18):3584.
33 Ng W F, Chiu K Y, Cheng F T. Effect of pH on the in vitro corrosion rate of magnesium degradable implant material[J].Materials Science and Engineering C-Materials for Biological Applications,2010,30(6):898.
[1] 张泽疆, 李新梅, 朱春金, 李航, 杨定力. 纳米TiB2对CoCrFeNiSi高熵合金涂层耐磨与耐蚀性能的影响[J]. 材料导报, 2025, 39(3): 23090210-9.
[2] 赵兴源, 刘昕, 刘秋元, 邱肖盼, 张子月, 江社明, 张启富. 连续物理气相沉积带钢涂镀研究进展与应用现状[J]. 材料导报, 2025, 39(2): 24030032-9.
[3] 周祎伟, 段海涛, 李健, 马利欣, 李文轩, 尤锦鸿, 贾丹. 外加磁场对摩擦副材料摩擦磨损及抗腐蚀性能影响的研究进展[J]. 材料导报, 2025, 39(2): 23110090-19.
[4] 井文昌, 张志鸿, 刘香琛, 吴云翼, 李宝让. 新型液态金属电池材料体系及其相关技术的研究与进展[J]. 材料导报, 2025, 39(1): 23090098-17.
[5] 马东帅, 闫二虎, 白金旺, 王豪, 张硕, 王艺豪, 李唐卫, 郭智洁, 周子锐, 邹勇进, 孙立贤. V-Ti-Fe三元合金显微组织、氢传输行为及耐蚀性能研究[J]. 材料导报, 2024, 38(8): 22110007-7.
[6] 赵永福, 唐敏, 姜峨, 银朝晖, 陈子瑞, 张根, 吴宗佩, 李杨. 氨型碱性水化学对690TT腐蚀特性的影响[J]. 材料导报, 2024, 38(7): 23030048-6.
[7] 王越, 周本基, 徐能能, 乔锦丽. 可逆锌-空气电池锌阳极研究进展及挑战[J]. 材料导报, 2024, 38(6): 23040162-10.
[8] 张学鹏, 张戎令, 杨斌, 肖鹏震, 王小平, 龙朝飞. 冻融-硫酸盐腐蚀耦合作用下早龄期混凝土强度演变及预测模型研究[J]. 材料导报, 2024, 38(5): 22080059-9.
[9] 桂晓露, 程瑄, 李芃飞, 高古辉, 孙丽娅, 易汉平. 石墨烯的分散方法及在水性环氧富锌涂料中的应用进展[J]. 材料导报, 2024, 38(3): 22060047-8.
[10] 朱凯涛, 董多, 杨晓红, 朱冬冬, 王晓红, 马腾飞. GH4169/BNi-7钎焊接头的显微组织、力学性能和腐蚀行为[J]. 材料导报, 2024, 38(24): 23100078-8.
[11] 王帆,赵国仙, 方堃, 裴文霞, 丁浪勇, 刘冉冉. 3Cr钢在含O2的CO2环境中的腐蚀行为研究[J]. 材料导报, 2024, 38(23): 23070093-8.
[12] 裴文霞, 赵国仙, 丁浪勇, 方堃, 王帆, 刘冉冉. 温度对管线钢在SRB/CO2环境中的腐蚀影响[J]. 材料导报, 2024, 38(23): 23070058-8.
[13] 张若楠, 韦朋余, 王珂, 曾庆波, 王连, 宋培龙. 海水环境下船用高强钢腐蚀疲劳损伤行为研究[J]. 材料导报, 2024, 38(23): 23090176-6.
[14] 吴伟同, 徐迪, 程学群, 张达威, 李晓刚. 国家材料腐蚀与防护科学数据中心建设历程与发展现状[J]. 材料导报, 2024, 38(23): 23090008-8.
[15] 钟丽萍, 路迢迢, 孙林超, 张梅, 王亮亮, 王永建. 镁合金多向锻造技术的研究现状与展望[J]. 材料导报, 2024, 38(23): 23070200-11.
[1] Wei ZHOU, Xixi WANG, Yinlong ZHU, Jie DAI, Yanping ZHU, Zongping SHAO. A Complete Review of Cobalt-based Electrocatalysts Applying to Metal-Air Batteries and Intermediate-Low Temperature Solid Oxide Fuel Cells[J]. Materials Reports, 2018, 32(3): 337 -356 .
[2] Dongyong SI, Guangxu HUANG, Chuanxiang ZHANG, Baolin XING, Zehua CHEN, Liwei CHEN, Haoran ZHANG. Preparation and Electrochemical Performance of Humic Acid-based Graphitized Materials[J]. Materials Reports, 2018, 32(3): 368 -372 .
[3] Yunzi LIU,Wei ZHANG,Zhanyong SONG. Technological Advances in Preparation and Posterior Treatment of Metal Nanoparticles-based Conductive Inks[J]. Materials Reports, 2018, 32(3): 391 -397 .
[4] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[5] Yingke WU,Jianzhong MA,Yan BAO. Advances in Interfacial Interaction Within Polymer Matrix Nanocomposites[J]. Materials Reports, 2018, 32(3): 434 -442 .
[6] Zhengrong FU,Xiuchang WANG,Qinglin JIN,Jun TAN. A Review of the Preparation Techniques for Porous Amorphous Alloys and Their Composites[J]. Materials Reports, 2018, 32(3): 473 -482 .
[7] Fangyuan DONG,Shansuo ZHENG,Mingchen SONG,Yixin ZHANG,Jie ZHENG,Qing QIN. Research Progress of High Performance ConcreteⅡ: Durability and Life Prediction Model[J]. Materials Reports, 2018, 32(3): 496 -502 .
[8] Lixiong GAO,Ruqian DING,Yan YAO,Hui RONG,Hailiang WANG,Lei ZHANG. Microbial-induced Corrosion of Concrete: Mechanism, Influencing Factors,Evaluation Indices, and Proventive Techniques[J]. Materials Reports, 2018, 32(3): 503 -509 .
[9] Ningning HE,Chenxi HOU,Xiaoyan SHU,Dengsheng MA,Xirui LU. Application of SHS Technique for the High-level Radioactive Waste Disposal[J]. Materials Reports, 2018, 32(3): 510 -514 .
[10] Haoran CHEN, Yingdong XIA, Yonghua CHEN, Wei HUANG. Low-dimensional Perovskites: a Novel Candidate Light-harvesting Material for Solar Cells that Combines High Efficiency and Stability[J]. Materials Reports, 2018, 32(1): 1 -11 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed