Optimization and Simulation of Vacuum Assisted Resin Infusion Process for Perforated and Grooved Foam Sandwich Composite
YANG Zhangtao1, NI Aiqing2, WANG Jihui1,*, FENG Yuwei1
1 School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China 2 State Key Laboratory of Advanced Technology for Material Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China
Abstract: The design of perforated and grooved foam sandwich composites was proposed here and the processing technique of vacuum assisted resin infusion (VARI) used was investigated experimentally and numerically. Firstly, the related parameters of glass fiber fabric and resin were measured experimentally. The Hagen-Poiseuill equation and Darcy’s law were used to calculate the equivalent permeabilities of the holes and grooves. Then, the VARI processing of perforated and grooved foam sandwich composites was simulated by PAM-RTM and compared with experimental results. Afterwards, PAM-RTM was applied to study the influence of the parameter of core processing, the perfusion scheme of resin and the location of distribution medium on the molding process, and the optimal scheme was obtained. Finally, by investigating this scheme, the relationship between resin viscosity and perfusion time was studied, and the prediction function was obtained by fitting. The results show that good agreement was achieved between the experiment and simulation. The optimal perfusion scheme can significantly shorten the filling time of resin and reduce the overall porosity. The perfusion time can be accurately predicted by prediction function, which serves as significant guidance for practical production.
杨张韬, 倪爱清, 王继辉, 冯雨薇. 孔槽泡沫夹芯复合材料真空辅助树脂传递工艺仿真与优化[J]. 材料导报, 2024, 38(2): 22110148-9.
YANG Zhangtao, NI Aiqing, WANG Jihui, FENG Yuwei. Optimization and Simulation of Vacuum Assisted Resin Infusion Process for Perforated and Grooved Foam Sandwich Composite. Materials Reports, 2024, 38(2): 22110148-9.
1 Luo Z, Zhu X, Mei Z Y, et al. Journal of Vibration and Shock, 2008, 27(11), 134 (in Chinese). 罗忠, 朱锡, 梅志远, 等. 振动与冲击, 2008, 27(11), 134. 2 Zhu Z X, Zhu X, Li Y Q, et al. Ship Science and Technology, 2018, 40(3), 1 (in Chinese). 朱子旭, 朱锡, 李永清, 等. 舰船科学技术, 2018, 40(3), 1. 3 Vijaya R B, Alagarraja K, Elanchezhian C. Materials Today:Procee-dings, 2019, 16(2), 859. 4 Zhu D, Shi H, Fang H, et al. Composites Part B:Engineering, 2018, 150, 196. 5 Ouezgan A, Mallil E H, Echaabi J. Journal of Composite Materials, 2022, 56(21), 3221. 6 Jia Y M, Han Q M, Li Q, et al. Aeronautical Manufacturing Technology, 2009(S1), 8 (in Chinese). 贾欲明, 韩全民, 李巧, 等. 航空制造技术, 2009(S1), 8. 7 Yan C, Li Y, Su X, et al. Materials (Basel, Switzerland), 2022, 15(15), 5279. 8 Sun Y, Liu Q, Huang F, et al. Fiber Reinforced Plastics/Composites, 2017(9), 89 (in Chinese). 孙煜, 刘强, 黄峰, 等. 玻璃钢/复合材料, 2017(9), 89. 9 Malheiro J M, Nunes J P. Advances in evolutionary and deterministic methods for design, optimization and control in engineering and sciences, Gaspar C A, Periaux J, ed. Springer International Publishing, Germany, 2020, pp. 319. 10 Yan C, Wu H, Ren X, et al. Fibers and Polymers, 2021, 22(9), 2612. 11 Poodts E, Minak G, Dolcini E, et al. Composites Part B:Engineering, 2013, 53, 179. 12 Jin S Q, Li W X, Liu H X. Acta Materiae Compositae Sinica, 2018, 35(12), 3342 (in Chinese). 金世奇, 李文晓, 刘昊鑫. 复合材料学报, 2018, 35(12), 3342. 13 Zhao C H, Zhang G C, Wu Y B. Materials, 2012, 5(7), 1285. 14 Jiang M C, Zhao L, Liu Q, et al. Acta Materiae Compositae Sinica, 2013, 30(S1), 266 (in Chinese). 姜茂川, 赵龙, 刘强, 等. 复合材料学报, 2013, 30(S1), 266. 15 Jhan Y, Lee Y, Chung C. Journal of Reinforced Plastics & Composites, 2011, 30(6), 533. 16 Jhan Y, Lee Y, Chung C. Journal of Composite Materials, 2011, 46(12), 1417. 17 Wang K, Lai J M, Yan D D, et al. Polymer Materials Science and Engineering, 2015, 31(11), 124 (in Chinese). 王科, 赖家美, 鄢冬冬, 等. 高分子材料科学与工程, 2015, 31(11), 124. 18 Halimi F, Golzar M, Asadi P, et al. Journal of Composite Materials, 2012, 47(15), 1853. 19 Jin Q H, Dang L, Yuan C X, et al. Fiber Reinforced Plastics/Compo-sites, 2019(7), 65 (in Chinese). 堇青海, 党磊, 原崇新, 等. 玻璃钢/复合材料, 2019(7), 65. 20 Li X L, Wang J H, Ni A Q, et al. Acta Materiae Compositae Sinica, 2019, 36(6), 1428 (in Chinese). 李香林, 王继辉, 倪爱清, 等. 复合材料学报, 2019, 36(6), 1428. 21 Zhang H, Li S X, Wang J H, et al. Acta Materiae Compositae Sinica, 2020, 37(5), 1175 (in Chinese). 张浩, 李书欣, 王继辉, 等. 复合材料学报, 2020, 37(5), 1175. 22 Xu G P, Han J. Journal of Textile Research, 2007(9), 61 (in Chinese). 徐国平, 韩建. 纺织学报, 2007(9), 61. 23 Liu J L, Wu X Q. Fiber Reinforced Plastics/Composites, 2008(6), 41 (in Chinese). 刘金良, 吴晓青. 玻璃钢/复合材料, 2008(6), 41. 24 Zhan M F, Wang J H, Ni A Q, et al. Acta Materiae Compositae Sinica, 2021, 38(12), 4180. 詹明樊, 王继辉, 倪爱清, 等. 复合材料学报, 2021, 38(12), 4180. 25 Kandlikar S G, Schmitt D, Carrano A L, et al. Physics of Fluids, 2005, 17(10), 100606. 26 Lei B, Zhou C X, Yu W, et al. CIESC Journal, 2012, 63(3), 775 (in Chinese). 雷波, 周持兴, 俞炜, 等. 化工学报, 2012, 63(3), 775. 27 Mohan R V, Shires D R, Tamma K K, et al. Polymer Composites, 1998, 19(5), 527. 28 Ma Y X, Wang J H, Ni A Q, et al. Acta Materiae Compositae Sinica, 2021, 38(10), 3302 (in Chinese). 马彦旭, 王继辉, 倪爱清, 等. 复合材料学报, 2021, 38(10), 3302. 29 Matsuzaki R, Kobayashi S, Todoroki A, et al. Composites Part A:Applied Science and Manufacturing, 2013, 45, 79. 30 Al-Zain A O, Alboloshi E A, Amir W A, et al. The Saudi Dental Journal, 2022, 34(3), 243. 31 Chung H P, Woo L. Journal of Reinforced Plastics and Composites, 2011, 30(11), 957.
渝公网安备50019002502923号 版权所有：《材料导报》编辑部
2024, Vol. 38 
