Other articles related with "TG1":
  GUO Youdan, CHENG Xiaonong
  Precipitation Behaviors of SAF2507 Duplex Stainless Steel Precipitated Phase by Secondary Quench Stamping
    Materials Reports   2025 Vol.39 (9): 23100100-7 [Abstract] (13) [PDF 20242 KB] (2)
  ZHAO Shuai, WEN Shaomu, LIAO Kexi, QIN Lin, LIN Dong, GAO Jian
  Research Development on the Implementation of Non-destructive Testing Technologies in High Sulfur Natural Gas Pipelines
    Materials Reports   2025 Vol.39 (9): 24030169-9 [Abstract] (20) [PDF 26031 KB] (6)
  LI Cong, ZHAO Lei, XU Lianyong, HAN Yongdian, HAO Kangda
  Research Advances in Hydrogen Induced Damage of Gas Turbines in Hydrogen-containing/Pure-hydrogen Circumstances
    Materials Reports   2025 Vol.39 (9): 24040126-10 [Abstract] (16) [PDF 31468 KB] (2)
  CHEN Gangming, WANG Hui, HUANG Xuefei
  Effects of Warm Rolling on the Microstructure and Mechanical Properties of Low-Cr FeCrAl Alloys at Room and Elevated Temperatures
    Materials Reports   2025 Vol.39 (9): 24060057-11 [Abstract] (19) [PDF 36785 KB] (2)
  HAN Shuaiwen, ZHU Kesheng, LIU Changyang, LIU Ziliang, BIAN Liuzhen, YANG Lilin
  Research Progress of Manganese-Cobalt Coating Materials on Metal Interconnects of Solid Oxide Fuel Cells
    Materials Reports   2025 Vol.39 (8): 23100253-6 [Abstract] (74) [PDF 2735 KB] (26)
  CHENG Yan, ZHANG Xian, SU Zhicheng, LIU Jing, WU Kaiming
  Research Progress in Mechanical Properties and Corrosion Behavior of Advanced High-strength Steels with TRIP Effect
    Materials Reports   2025 Vol.39 (8): 24020115-8 [Abstract] (54) [PDF 20876 KB] (12)
  ZHANG Peng, LI Bing, XU Feiyue, WANG Ruijie, WANG Min
  Effect of Pretreatment Conditions on Microstructure and Plastic Instability Behavior of QP980 Steel
    Materials Reports   2025 Vol.39 (8): 24020130-6 [Abstract] (50) [PDF 25074 KB] (6)
  ZOU Xiaohui, LIU Yongfei, LI Dan, YAO Haiyuan, DONG Leilei, XU Yunze
  Study on the Erosion-Corrosion Behavior of Martensitic Steel and High Manganese Steel in Artificial Seawater
    Materials Reports   2025 Vol.39 (8): 24030170-8 [Abstract] (43) [PDF 41255 KB] (12)
  CHEN Xin, LUO Hongjie, WANG Li, WU Linli, BAI Tianshu, LIAN Deliang
  Differences in the Characterization of Aluminum Foam Structures Based on 2D Images and 3D Models
    Materials Reports   2025 Vol.39 (8): 24030173-8 [Abstract] (47) [PDF 45787 KB] (11)
  LIU Yu, ZHANG Jian, PANG Xiaotong, ZHOU Xiaojie, LU Xianzheng, CHEN Xiaomin, LI Jiahao, PENG Ping
  Effect and Mechanism of Lanthanum-Nickel Series Alloy on the Microstructures and Hydrogen Storage Performance of Magnesium Hydride
    Materials Reports   2025 Vol.39 (8): 24040039-6 [Abstract] (61) [PDF 53723 KB] (15)
  ZENG Qi, NI Haohan, LIU Wei, LI Chaochao, WANG Jiangwei
  Microstructure Evolution and Crack Propagation Behaviors of the Primary Hole in Additive Manufactured GH3536 Reverse-flow Combustor Liner
    Materials Reports   2025 Vol.39 (8): 24040055-4 [Abstract] (57) [PDF 21241 KB] (7)
  LONG Wujian, TANG Yi, ZHENG Shuyi, HE Chuang
  N-GQDs as Novel Corrosion Inhibitors for Carbon Steel:from Design to Mechanism
    Materials Reports   2025 Vol.39 (7): 23100196-10 [Abstract] (73) [PDF 29152 KB] (5)
  WANG Cong, YANG Fuyao, LIU Yang, HAN Yu, GAO Jie, SUN Hao, LIU Chengyu
  Effect of Melt-Spinning Speed and Ce Content on the Phase Constitution and Magnetic Properties of Lean Rare Earth Ce-Fe-B Alloys
    Materials Reports   2025 Vol.39 (7): 24010030-5 [Abstract] (69) [PDF 4091 KB] (5)
  GAO Feng, GUO Ce'an, ZHANG Jian
  Research Progress of Cr, Ta and Cr-Ta Alloy Coating on the Inner Wall of Gun Barrel
    Materials Reports   2025 Vol.39 (7): 24010200-8 [Abstract] (81) [PDF 7950 KB] (16)
  TAN Huijie, WANG Haiyan, HUA Liangeng, GAO Xueyun, LYU Meng, YU Dawei, XING Lei
  Effect of Rare Earth Ce on Microstructure Evolution of Fe-Ni-Al Maraging Steel During Isothermal Process
    Materials Reports   2025 Vol.39 (7): 24010236-6 [Abstract] (82) [PDF 31950 KB] (6)
  HUANG Hanbing, WANG Pei, QIAO Shi, MA Rulong, HAO Zhenhua, SHU Yongchun, HE Jilin
  Study on Frictional Wear and Electrochemical Corrosion Properties of Cu-0.9Be-1.5Ni-0.04Y Alloys
    Materials Reports   2025 Vol.39 (7): 24010241-8 [Abstract] (70) [PDF 65349 KB] (7)
  CHEN Lisong, LIU Jinxue, XIE Haitao, LIU Zhipeng, SONG Xinyu, XIAO Yang, GUAN Shaokang, HE Jilin
  Effects of Annealing Treatment on Microstructures and Mechanical Properties of Extruded Mg-8Li-3Al-2Zn Plates
    Materials Reports   2025 Vol.39 (7): 24020152-5 [Abstract] (85) [PDF 26940 KB] (9)
  YE Liya, CHEN Hongfei, YANG Guang, GAO Yanfeng
  Effect of V2O5 on the Hot Corrosion Resistance of β-(Ni, Pt)Al Coating
    Materials Reports   2025 Vol.39 (7): 24030041-4 [Abstract] (60) [PDF 11720 KB] (8)
  YU Weiyuan, JING Rui, DONG Pengfei, WU Baolei, LI Yang, QIANG Xiao
  Crack and Microstructure Analysis of High-speed Laser Clad Fe-based Amorphous Coating
    Materials Reports   2025 Vol.39 (7): 24030107-6 [Abstract] (77) [PDF 25608 KB] (11)
  MEI Ting, XU Hongyang, LI Xun, LONG Yunwei, TANG Hua, LI Zhipeng, ZOU Aihua
  Study on the Microorganization and Wear Resistance of Complex Brass and Silicon Manganese Brass in the Key Friction Pair of Plunger Pump
    Materials Reports   2025 Vol.39 (7): 24080117-5 [Abstract] (79) [PDF 17782 KB] (6)
  REN Yongzhong, SHU Tianhao, LI Xinlin, ZHANG Zhenyu, LIANG Bunv, LI Tianyi, JIN Zhihua
  Construction of Superhydrophobic Sand Surface and Its Properties Based on Chemical Etching
    Materials Reports   2025 Vol.39 (6): 23050086-5 [Abstract] (78) [PDF 10595 KB] (12)
  XIE Haomin, LI Guangming, HU Lingyue, MAO Feixiong, GONG Ke
  Influence of Load and Electrode Potential on the Tribocorrosion Behavior of Ti-6Al-3Nb-2Zr-1Mo Alloy in Seawater
    Materials Reports   2025 Vol.39 (6): 24010227-11 [Abstract] (83) [PDF 42155 KB] (16)
  YAO Tongrui, WANG Man, XI Xiaoli
  Research Status of High-temperature Oxidation Behavior of Al-containing Heat-resistant Alloys
    Materials Reports   2025 Vol.39 (6): 24050040-10 [Abstract] (111) [PDF 40229 KB] (14)
  XU Haili, YANG Yawen, XING Qiang, CHEN Yan, LIAO Xiaobo, ZHANG Xiaoping, ZHUANG Jian
  Microstructure Fabrication Path Planning for Glass Microprobe Electrodeposition
    Materials Reports   2025 Vol.39 (5): 23100020-7 [Abstract] (81) [PDF 19145 KB] (17)
  ZHANG Kailun, PAN Dong, GUO Qingtao, ZHONG Honggang, ZHANG Yu, ZHANG Xiangyu, XU Pei
  Thermal Simulation Study on Dendrite Growth of 24Mn Steel Continuous Casting Slab Under Different Secondary Cooling Water Ratio
    Materials Reports   2025 Vol.39 (5): 23100237-8 [Abstract] (76) [PDF 20039 KB] (10)
  ZHENG Huize, HE Jianli, GAO Chenxin, ZHANG Haiming, XIANG Yuxin
  Texture Evolution and Recrystallization Behavior of WE43 Magnesium Alloy Under Warm Compression
    Materials Reports   2025 Vol.39 (5): 24020054-7 [Abstract] (93) [PDF 54444 KB] (23)
  LIN Jiamao, YAO Meiyi, CHEN Zhebin, XU Shitong, HU Lijuan
  Research Progress of Zirconium-based Biomedical Alloys
    Materials Reports   2025 Vol.39 (5): 24020141-10 [Abstract] (112) [PDF 12381 KB] (17)
  WANG Senwei, WANG Li, WANG Mingqing, SHE Jia, YI Jiayan, CHEN Xianhua, PAN Fusheng
  Microstructure and Properties of Mg-xSc (x=0.5,1.0,3.0,5.0) Biomedical Alloys
    Materials Reports   2025 Vol.39 (5): 24090019-8 [Abstract] (140) [PDF 37379 KB] (22)
  JIANG Wenping, PANG Xingzhi, HE Juanxia, YANG Wenchao, ZHAN Yongzhong
  A Review on Preparation Process and Properties of Titanium Alloy-Hydroxyapatite Composite Materials for Bone Repair
    Materials Reports   2025 Vol.39 (5): 24090227-14 [Abstract] (131) [PDF 56443 KB] (38)
  WANG Xinyao, WEI Yongtao, WU Jing, WANG Xianbin, YANG Wenchao, ZHAN Yongzhong
  Application of XPS in the Research of New Dental Medical Materials
    Materials Reports   2025 Vol.39 (5): 24100162-11 [Abstract] (118) [PDF 15671 KB] (19)