药型罩材料技术研究进展

doi:10.11896/cldb.24040081

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (20046KB)
Export: BibTeX | EndNote (RIS)

Abstract The shaped warhead, with the main component of shaped charge liner, is the primary means for drones to damage armor, bunkers, and other targets. The present review is based on the penetration mechanism of shaped charge liners and the development tendency of ‘high penetration, large reaming and strong aftereffect'. It first outlines the conventional methods such as structural designing and inert material modification for enhancing damage capabilities of shaped charge liners, and reveals the inadequacy of these conventional methods in simultaneously promoting longitudinal and lateral damage capability. It second describes the current research status of energetic structural materials for enhanced shaped charge liners, demonstrating their effectiveness in enhancing comprehensive damage effect while also clarifying their limitations in comprehensive mechanical properties. It finally states the basic concept of multi-principal element alloys and their applicative potential in energetic structural materials for shaped charge liners. This paper can not only serve as a reference for developing new generation high-damage shaped charge liner and materials but also provide new insight for their applicative research.

Key words： shaped charge liner energetic structural material penetration aftereffect efficient damage multi-principal element alloy

Published: 10 April 2025 Online: 2025-04-10

CLC number:	TB31
	O77

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Yang
	FAN Yijing
	SHEN Weijian
	WANG Ruixin
	CHEN Jin
	TANG Yu

Cite this article:

LIU Yang,FAN Yijing,SHEN Weijian, et al. Progress in the Materials for Shaped Charge Liners[J]. Materials Reports, 2025, 39(7): 24040081-9.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.24040081 OR https://www.mater-rep.com/EN/Y2025/V39/I7/24040081

1 Walters W P, Zukas J. Fundamentals of shaped charge, Interscience Publication, USA, 1989, pp.398.
2 Wang H F, Zheng Y F, Yu Q B. Physics of reactive liner enhanced shaped charge warheads, Beijing Institute of Technology Press, 2020, pp.5 (in Chinese).
王海福, 郑元枫, 余庆波. 活性毁伤增强聚能战斗部技术, 北京理工大学出版社, 2020, pp.5.
3 Xu W L, Wang C, Chen D P. International Journal of Impact Engineering, 2019, 132, 103336.
4 Munroe C E. American Journal of Science, 1888, 36(211), 48.
5 Esteban B, Lenhart L B, Rüdiger L, et al. International Journal of Protective Structures, 2015, 6(3), 439.
6 Cui P, Wang D S, Shi D M, et al. Materials, 2020, 4, 912.
7 Li J L, Jiang J W, Men J B, et al. Chinese Journal of High Pressure Physics, 2023, 36(1), 194 (in Chinese).
李金霖, 蒋建伟, 门建兵, 等. 高压物理学报, 2023, 36(1), 194.
8 Li S N, Zhang G W, Cui X J, et al. Ordnance Industry Automation, 2019, 38(4), 75 (in Chinese).
李松楠, 张国伟, 崔晓杰, 等. 兵工自动化, 2019, 38(4), 75.
9 An W T, Gao Y H, Zhou J, et al. Journal of Projectiles, Rockets, Missiles and Guidance, 2020, 40(1), 24 (in Chinese).
安文同, 高永宏, 周杰, 等. 弹箭与制导学报, 2020, 40(1), 24.
10 Ruan G G, Lei W, Yue J W, et al. Chinese Journal of Explosives & Propellants, 2018(1), 93 (in Chinese).
阮光光, 雷伟, 岳继伟, 等. 火炸药学报, 2018(1), 93.
11 Chen X, Li R J, Wan T Q, et al. Explosive Materials, 2015, 44(2), 58 (in Chinese).
陈兴, 李如江, 弯天琪, 等. 爆破器材, 2015, 44(2), 58.
12 Zheng Z M. Explosion and Shock Waves, 1981(1), 6 (in Chinese).
郑哲敏. 爆炸与冲击, 1981(1), 6.
13 Zheng Z M. Acta Armamentarii, 1980(1), 13 (in Chinese).
郑哲敏. 兵工学报, 1980(1), 13.
14 Xu H Q, Liu J X, Cai Q, et al. Materials & Design, 2022, 221, 110997.
15 Zhang X W, Xiao QQ, Huang Z X, et al. Journal of Projectiles, Rockets, Missiles and Guidance, 2020, 40(5), 1 (in Chinese).
张晓伟, 肖强强, 黄正祥, 等. 弹箭与制导学报, 2020, 40(5), 1.
16 Deng H, Li G, Liang Z, et al. International Journal of Multiphysics, 2022, 16(3), 261.
17 Fan X F, Li W B, Wang X M, et al. Acta Armamentarii, 2017, 38(10), 1918 (in Chinese).
樊雪飞, 李伟兵, 王晓鸣, 等. 兵工学报, 2017, 38(10), 1918.
18 Hu X B, Wang T Y, Wang J H, et al. Journal of Physics:Conference Series, 2023, 2478(12), 122060.
19 Yuan Z H, Wang J P, Li ZZ, et al. Ordnance Material Science and Engineering, 2016, 39(1), 73 (in Chinese).
袁志华, 王季鹏, 李政芝, 等. 兵器材料科学与工程, 2016, 39(1), 73.
20 He H M, Wang L X, Sun J, et al. Explosion and Shock Waves, 2013(S1), 28 (in Chinese).
贺海民, 王利侠, 孙建, 等. 爆炸与冲击, 2013(S1), 28.
21 Zhang T, Gao X M, Li J C, et al. Defence Technology, 2024, 31(1), 95.
22 Laszlo J K, William P W. In:Proceedings of the 23rd International Symposium on Ballistics. Tarragona, 2007, pp.31.
23 Daniels A S, Baker E L, DeFisher S E, et al. In:Proceedings of the 23rd International Symposium on Ballistics. Tarragona, Spain, 2007, pp.239.
24 Guo H G, Zheng Y F, He S, et al. Defence Technology, 2022, 1578.
25 Zhang X P, Wang Z J, Yin J P, et al. Materials, 2021, 14(13), 3701.
26 Liu W H, Liu Y B, Wu Y Z, et al. Journal of Ordnance Equipment Engineering, 2022(5), 114 (in Chinese).
刘文赫, 刘迎彬, 吴育智, 等. 兵器装备工程学报, 2022(5), 114.
27 Sun M, Li C, Zhang X, et al. Materials, 2018, 11, 2267.
28 Zhang Z. Study ondamage performance of W-Ni-Al reactive jet. Master's Thesis, North University of China, China, 2021 (in Chinese).
张增. W-Ni-Al反应射流侵彻性能研究. 硕士学位论文, 中北大学, 2021.
29 Han J, Chen X, Du Z. Materials Research Express, 2019, 6(11), 115209.
30 Shi Y X. Study on application of multi-principal amorphous alloy for energetic liner. Master's Thesis, Army Engineering University of PLA, China, 2017 (in Chinese).
石永相. 多元非晶合金含能材料药型罩应用研究. 硕士学位论文, 陆军工程大学, 2017.
31 Feng B, Li Y C, Wu S Z, et al. Materials & Design, 2016, 108, 411.
32 Ge C, Dong Y, Maimaitituersun W. Materials, 2016, 9(7), 590.
33 Wang L, Liu J X, Li S K, et al. Materials & Design, 2016, 92, 397.
34 Tang E L, He Z H, Chen C, et al. Composite Structures, 2020, 241, 112063.
35 Xu S L, Yang S Q, Zhao P D, et al. Chinese Journal of Theoretical and Applied Mechanics, 2009(5), 708 (in Chinese).
徐松林, 阳世清, 赵鹏铎, 等. 力学学报, 2009(5), 708.
36 Xu S L, Yang S, Zhang W. Journal of Physics:Condensed Matter, 2009, 28, 285401.
37 Zhao P D, Lu F Y, Li J L, et al. Chinese Journal of Energetic Materials, 2009(4), 459 (in Chinese).
赵鹏铎, 卢芳云, 等. 含能材料, 2009(4), 459.
38 Ding J, Zhu S G. Chinese Journal of Energetic Materials, 2023(8), 844 (in Chinese).
丁建, 朱顺官. 含能材料, 2023(8), 844.
39 Huang B Y, Xiong W, Zhang X F, et al. Chinese Journal of Energetic Materials, 2021(2), 149 (in Chinese).
黄炳瑜, 熊玮, 张先锋, 等. 含能材料, 2021(2), 149.
40 Zhou Q, Hu Q W, Wang B, et al. Journal of Alloys and Compounds, 2020, 832, 154894.
41 Hu Q W, Liu R, Zhou Q, et al. Materials Science and Engineering, 2022, 849, 143332.
42 Chen J, Yuan B, Liang Z, et al. In:2018 International Conference of Defense and Technology, Beijing, 2018, pp.603.
43 Zhao K X, Zhang X H, Gu X R, et al. Defence Technology, 2023, 25(7), 112.
44 Hu Q, Liu R, Zhou Q, et al. Journal of Alloys and Compounds, 2022, 924, 166191.
45 Panel N Q, Du Z H, Zhu Z W, et al. The Chinese Journal of Nonferrous Metals, 2016(5), 973 (in Chinese).
潘念侨, 杜忠华, 朱正旺, 等. 中国有色金属学报, 2016(5), 973.
46 Chen L, Zu X D, Huang Z X, et al. Journal of Ballistics, 2022(1), 65 (in Chinese).
陈亮, 祖旭东, 黄正祥, 等. 弹道学报, 2022(1), 65.
47 Ji C, He Y, Wang C T, et al. Journal of Non-Crystalline Solids, 2019, 515, 149.
48 Suryanarayana C. Progress in Materials Science, 2001, 46(1-2), 1.
49 Yeh J W, Chen S K, Lin S J, et al. Advanced Engineering Materials, 2004, 6(5), 299.
50 Yeh J W. Journal of Metals, 2015, 67(10), 2254.
51 Tang Y, Wang R X, Li S, et al. Chinese Journal of Energetic Materials, 2021, 29(10), 1008 (in Chinese).
唐宇, 王睿鑫, 李顺, 等. 含能材料, 2021, 29(10), 1008.
52 Li W D, Xie D, Li D Y, et al. Progress in Materials Science, 2021, 118, 100777.
53 Chuang M H, Tsai M H, Wang W R, et al. Acta Materialia, 2011, 59(16), 6308.
54 Li Z, Pradeep K G, Deng Y, et al. Nature, 2016, 534(7606), 227.
55 Zhang W R, Liaw P K, Zhang Y. Science China-Materials, 2018, 61(1), 2.
56 Shi Y Z, Yang B, Xie X, et al. Corrosion Science, 2017, 119, 33.
57 Li G, Zhang Y F, Ma Y M, et al. Journal of Yanshan University, 2020, 44(4), 9 (in Chinese).
李工, 张翼飞, 马一墨, 等. 燕山大学学报, 2020, 44(4), 9.
58 George E P, Curtin W A, Tasan C C. Acta Materialia, 2020, 188, 435.
59 Wang H, He Q F, Gao X, et al. Advanced Materials, 2023, 36(17), 2305453.
60 Zhang Z R, Zhang H, Tang Y, et al. Materials & Design, 2017, 133, 435.
61 Li N, Wang R X, Zhao H B, et al. Materials Today Communications, 2022, 32, 103847.
62 Ren K R, Liu H, Chen R, et al. Materials Science and Engineering A, 2021, 827, 142074.
63 Jia S Z, Zhen J W, Du S G. Engineering Blasting, 2017, 23(6), 48 (in Chinese).
贾栓柱, 甄建伟, 杜仕国. 工程爆破, 2017, 23(6), 48.
64 He Y, Pan X C, He Y. In:International Conference on Mechanical Engineering and Mechanics. Wuxi, 2007, pp.1094.
65 Mao L, Ye S, Hu W X, et al. Acta Armamentarii, 2020, 41(10), 1962.
66 Chen J, Liu T W, Cao F H, et al. Metals, 2022, 5, 811.
67 宋佳星, 田权伟, 冯靖凯, 等. 中国专利, CN115200417A, 2022.
68 Zhao ZZ, Li T, Sheng D L, at al. Defence Technology, DOI:10.1016/j.dt.2024.04.006.
69 王本鹏, 王旭涛, 靳柯, 等. 中国专利, CN202210680795, 2022.
70 Wang C T, Hu X B, Ji C, et al. Journal of Physics:Conference Series, 2023, 2478(3), 032090.
71 Guo Y S, Liu R, Ran C, et al. Journal of Materials Research and Technology, 2024, 28, 2819.