滚动直线导轨副磨损特性和磨损机理试验研究

doi:10.11896/j.issn.1005-023X.2018.06.012

Abstract
Figure/Table
References
Related Citation (10)

Download:

Full Text ( PDF ) (4528KB)
Export: BibTeX | EndNote (RIS)

Abstract The precision maintenance contrast test on the 45 type rolling linear guide in China and abroad was carried out, and the precision maintenance of rolling linear guide was detected. The contact mechanics between the ball and raceway and the deformation of the ball based on the Hertz contact theory and rigid body dynamics were analyzed, and the maximum contact stress of the ball was obtained. Then the Workbench was adopted for simulation verification, which provides a theoretical reference for abrasive wear mechanism and adhesion wear mechanism study. According to the movement condition and the structure design of rolling linear guide, field emission scanning electron microscope and white light interferometer were used to observe the microscopic appearance of raceway and the ball of rolling linear guide after the test, exploring the wear characteristics and wear mechanism of rolling linear guide. Comparing the wear degree of raceway and the ball of rolling linear guide made in China and abroad, it is concluded that wear is the primary cause affecting precision maintenance.

Key words： linear rolling guide precision maintenance contrast test wear mechanism

Published: 25 March 2018 Online: 2018-03-25

CLC number:

TH117.1

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHAO Yipeng
	LIANG Yi
	FENG Hutian
	ZHANG Limin
	XU Bin

Cite this article:

ZHAO Yipeng,LIANG Yi,FENG Hutian, et al. Experimental Study on Wear Characteristics and Wear Mechanism of Rolling Linear Guide[J]. Materials Reports, 2018, 32(6): 915-923.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.06.012 OR https://www.mater-rep.com/EN/Y2018/V32/I6/915

1 Xu Q H, Chen J. Research situation and developing trends of liner motion ball guide[J].Journal of Henan Mechanical and Electrical Engineering College,2009,17(2):1(in Chinese).
徐起贺,陈静.滚动直线导轨副的研究现状及发展动向[J].河南机电高等专科学校学报,2009,17(2):1.
2 Zhong Y. Research on the basic theory and test bench design for the retention precision of rolling linear guide[D].Nanjing:Nanjing University of Science and Technology,2014(in Chinese).
钟洋. 滚动直线导轨副精度保持性基础理论研究与试验台设计[D].南京:南京理工大学,2014.
3 Lin M. Study of friction wear mechanism of linear motion guide and its characteristics[J].Machine Building & Automation,2013,42(3):67(in Chinese).
林敏. 滚动直线导轨副摩擦磨损机理及特性研究[J].机械制造与自动化,2013,42(3):67.
4 Yang Q R. Investigation of scratch mechanism on the slide ways[J].Lubrication Engineering,1983(5):41(in Chinese).
杨庆荣. 导轨面严重拉伤机理的探讨[J].润滑与密封,1983(5):41.
5 Wang C, Hu Y H, Tan Y Q, et al. Study on wear rate prediction model of slide guides based on Archard wear model[J].Lubrication Engineering,2014,39(8):73(in Chinese).
王超,胡亚辉,谭雁清,等.基于Archard磨损理论的滑动导轨磨损率预测模型研究[J].润滑与密封,2014,39(8):73.
6 Tan Y Q, Zhang L H, Wang K F, et al. Modeling of precision retaining ability for slide guide of machine tool based on wear analysis[J].Transactions of the Chinese Society for Agricultural Machinery,2015,46(2):351(in Chinese).
谭雁清,张连洪,王凯峰,等.基于表面磨损的机床导轨副精度保持性模型[J].农业机械学报,2015,46(2):351.
7 Chen S G. Study of wear prediction models of ordinary sliding guideway based on the statistical regularity[D].Tianjin:Tianjin University of Technology,2013(in Chinese).
陈士刚. 基于统计学规律的普通滑动导轨磨损预测模型的研究[D].天津:天津理工大学,2013.
8 Gong C. Linear motion ball guides kinetic analysis of the contact problem[D].Wuhan:Huazhong University of Science and Technology,2014(in Chinese).
龚灿. 滚珠直线导轨副接触问题的动力学分析[D].武汉:华中科技大学,2014.
9 Ji Z Q. Retention precision and experimental analysis of rolling linear guide[D].Nanjing:Nanjing University of Science and Technology,2016(in Chinese).
姬中晴. 滚动直线导轨副精度保持性研究及试验分析[D].南京:南京理工大学,2016.
10 Wang D, Wang W Z, Sun Z L, et al. AnaIyzing the factors affecting ball screw pair contact defbrmation[J].Joumal of Northeastem University,2011,32(4):567(in Chinese).
王丹,王文竹,孙志礼,等.滚珠丝杠副接触变形影响因素分析[J].东北大学学报自然科学版,2011,32(4):567.
11 Harris T A. Rolling Bearing Analysis[M].Wiley,1984.
12 Sun J L, Liu J S. Calculation of stiffness of a linear rolling guide[J].Journal of Huazhong University of Science and Technology,1997,1997(S1):18(in Chinese).
孙健利,刘建素.一般载荷作用下滚动直线导轨副的刚度计算[J].华中理工大学学报,1997,1997(S1):18.
13 Dirks B, Enblom R. Prediction model for wheel profile wear and rol-ling contact fatigue[J].Wear,2011,271(1-2):210.
14 Li G, Chen J, Guan D. Friction and wear behaviors of nanocrystalline surface layer of medium carbon steel[J].Tribology Internatio-nal,2010,43(11):2216.
15 Wang Z L, Cui H Z, Zhang G S, et al. Microstructure and room-temperature dry sliding wear behavior of GCr15 steel treated by surface induction hardening[J].2015,36(11):180(in Chinese).
王泽宁,崔洪芝,张国松,等.GCr15钢表面感应淬火微观组织及室温干滑动磨损行为[J].材料热处理学报,2015,36(11):180.