| RESEARCH PAPER |
|
|
|
|
|
Effect of Fe Content on Microstructure and Properties of
Laser Clad Layers |
| SUN Youzheng, LIU Shuai, LI Jinbao, LIU Changsheng
|
| Key Laboratory for Anisotropy and Texture of Materials Ministry of Education, Northeastern University, Shenyang 110819 |
|
|
|
|
Abstract In order to fulfill the demand of surface hardness of remanufacturing various backup rolls, iron based alloy powders mixed with different content of pure iron powders were prepared on Cr5 backup steel by laser claddng. Then effects of Fe content on microstructure, phases, and properties of the clad layers were investigated in this paper. Microstructure of clad layers was fishbone-like dendrites and net-like interdendritic structure. Clad layers with different fractions of dendrites could be obtained by changing the content of mixed pure iron powders. Hardness and wear resistance of layers decreased with the increase of Fe contents in mixed powder. Wear resistance of clad layer was better than traditional quenching work layer. The clad layer with a hardness of 480 HV and better wear resistance than traditional quenching work layer could be prepared by adding 50wt% pure iron powder into the mixed powder, which fulfilled the demand of remanufacturing Cr5 backup rolls.
|
|
Published: 25 February 2017
Online: 2018-05-02
|
|
|
|
|
1 Zhao Xiaohui, Zhang Dajian, Fan Guoping. Technology for heating processing of large-scale forged steel supporting roller[J]. Heavy Mach,2011(5):23(in Chinese).
赵晓辉, 章大健, 范国平. 大型锻钢支承辊热处理工艺的探讨[J]. 重型机械,2011(5):23.
2 Liu Yijie, Zhao Xichun, Guo Feng. Analysis flaking failure of forged steel backup roll[J]. Heavy Cast Forg,2011(6):33(in Chinese).
刘义杰, 赵席春, 郭峰. 锻钢支承辊剥落失效分析[J]. 大型铸锻件,2011(6):33.
3 Shen Yiming. Introduction of application technology of backup roll in Baosteel[J]. Steel Roll,2004,21(1):55(in Chinese).
沈一鸣. 宝钢支撑辊的使用技术[J]. 轧钢,2004,21(1):55.
4 Zhou Caidong, Tang Guangyin. Back-up roll surface repaired with bushing method[J]. Heavy Mach,2012(4):92(in Chinese).
周才东, 唐广银. 支承辊镶套修复[J]. 重型机械,2012(4):92.
5 Wang Q, Li Z, Shi Y, et al. Interior crack and its formation mechanism in overlaying weld of back-up rolls[J]. Eng Fail Anal,2013,34:268.
6 Li Ming, Gu Tongliang. Build up welding technique on repairing backup roll of medium and heavy palte mill[J]. Wide Heavy Plate,2012,18(6):41(in Chinese).
李明, 谷同亮. 中厚板轧机支承辊堆焊修复技术的应用[J]. 宽厚板,2012,18(6):41.
7 Woo W, Em V,Hubbard C R,et al. Residual stress determination in a dissimilar weld overlay pipe by neutron diffraction[J]. Mater Sci Eng A,2011,528:8021.
8 Jiang W, Luo Y, Wang B Y, et al. Residual stress reduction in the penetration nozzle weld joint by overlay welding[J]. Mater Des,2014,60:443.
9 Allebert J, Jungedal M, Waara P. Wear on overlay welded HCWI vs. quenched and tempered low alloyed carbon steels evaluated with granite in a laboratory drum test machine[J].Wear,2015,330:364.
10 Hemmati I, Ocelík V, Hosson J T M. Dilution effects in laser cladding of Ni-Cr-B-Si-C hardfacing alloys[J].Mater Lett,2012,84:69.
11 Shang S, Wellburn D, Sun Y Z, et al. Laser beam profile modulation for microstructure control in laser cladding of an NiCrBSi alloy[J]. Surf Coat Technol,2014,248:46.
12 Feng Hui, Li Jianfeng, Sun Jie. Study on remanufacturing repair of damaged crank shaft journal surface by laser caldding[J]. Chinese J Laser,2014,41(8):0803003-1(in Chinese).
封慧, 李剑峰, 孙杰. 曲轴轴颈损伤表面的激光熔覆再制造修复[J].中国激光,2014,41(8):0803003-1.
13 Yao C, Huang J, Zhang P, et al. Toughening of Fe-based laser-clad alloy coating[J].Appl Surf Sci,2011,257:2184.
14 Sun G, Zhou R, Li P, et al. Laser surface alloying of C-B-W-Cr powders on nodular cast iron rolls[J]. Surf Coat Technol,2011,205:2747.
15 Faure L, Bolle B, Philippon S, et al. Friction experiments for tita-nium alloy tribopairs sliding in dry conditions: Sub-surface and surface analysis[J]. Tribol Int,2012,54:17.
16 Chassaing G, Faure L, Philippon S, et al. Adhesive wear of a Ti6Al4V tribopair for a fast friction contact[J]. Wear,2014,320:25. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2017, Vol. 31 
