| RESEARCH PAPER |
|
|
|
|
|
Effect of Nitrogen and Argon Mixture Ratio on Microstructure and Properties of
TA2 Vacuum Nitrided Layer |
| ZHU Yuanyuan, LIU Jing, XIONG Mangmang, YANG Feng, YANG Chuang
|
| School of Materials Science and Engineering, Guizhou Normal University, Guiyang 550025 |
|
|
|
|
Abstract The TA2 industrial pure titanium was treated by the intermittent vacuum nitriding method. The influence of nitrogen argon ratio on the microstructures and properties of nitrided layer was investigated. The results showed that TiN and TiN0.3 were the main phase of the substrate surface. With the decrease of nitrogen-argon ratio, the effective hardening layer depth increased, but the compactness decreased because of the rarefied nitrogen. The nitride surface and diffusion depth can be formed under an appro-priate nitrogen-argon ratio. And under this conditions, the nitrided layer and diffusion layer combined closely with gentle hardness gradient. The corrosion potential showed an upward trend which increased from -0.622 V to -0.549 V with the nitrogen-argon ratio from 1∶5 to 5∶1. However, the corrosion current and corrosion rate exhibited versa trends.
|
|
Published: 25 February 2017
Online: 2018-05-02
|
|
|
|
|
1 Maksimovich G G, Fedirko V M, Pogrelyuk I M. Effects of low pressures in adynamic nitrogen atmospheres on titanium-alloy nitriding [J]. Fiziko-Khimicheskaya Mekhanika Materialov,1990,26(3):97.
2 Lee D B, Kim M J, et al. Oxidation of nitride layers formed on Ti-6Al-4V alloys by gas nitriding [J]. Metals Mater Int,2011,17(3):471.
3 Lee D B, Iryna P, Oleh Y, et al. Gas nitriding and subsequent oxidation of Ti-6Al-4V alloys [J]. Nanoscale Res Lett,2012,7:21.
4 Tokaji K, Ogawa T, Shibata H. The effects of gas nitriding on fatigue behavior in titanium and titanium alloys [J]. J Mater Eng Perform,1999,8(2):159.
5 Yu B X, Gao S J. Pure Ti pump shaft surface nitriding strengthening treatment [J]. Surf Technol,1996,25(5):31(in Chinese).
虞炳西,高树浚. 纯钛泵轴表面渗氮强化处理[J]. 表面技术,1996,25(5):31.
6 Zhao B, Wu J S, Sun J, et al. High-temperature gas nitridation of TiAl based alloys [J]. Acta Metall Sin,2001,37(8):837(in Chinese).
赵斌,吴建生,孙坚,等.TiAl基合金高温气体渗氮[J].金属学报,2001,37(8):837.
7 Fu G Y, Zhang H S, Cao L Q. Numerical simulation for gas nitriding of Ti [J]. Rare Metal Mater Eng,2009,38(S1):505(in Chinese).
付广艳,张红升,曹丽琴.钛气体渗氮的数值模拟[J].稀有金属材料与工程,2009,38(S1):505.
8 Jiang H T, Shao Z C, Wei S Q. Research progress of surface treatment techniques for titanium alloys [J]. Plating Finishing,2010,32(10):15(in Chinese).
姜海涛,邵忠财,魏守强. 钛合金表面处理技术的研究进展[J]. 电镀与精饰,2010,32(10):15.
9 Ma H Y, Wang M C, Wei Z. Solid oxygen-permeation & diffusion-solution treatment of titanium alloy at high temperature [J]. Rare Metal Mater Eng,2007,36(4):685(in Chinese).
马红岩, 王茂才, 魏政. 钛合金的高温固态渗氧-扩散固溶复合处理[J].稀有金属材料与工程,2007,36(4):685.
10 Wang L, Wu G Y. Effect of pulse process parameters on the gas nitrocarburizing layer depth [J]. Heat Treat Met,2006,31(3):71(in Chinese).
王蕾,吴光英.脉冲工艺参数对气体氮碳共渗层深度的影响[J].金属热处理,2006,31(3):71.
11 Yang C, Peng X D, Liu J, et al. Surface modification of TC4 tita-nium alloy by low pressure nitriding [J]. Chin J Vacuum Sci Tech-nol,2014,34(11):1146(in Chinese).
杨闯,彭晓东,刘静,等.TC4钛合金低压真空渗氮处理[J].真空科学与技术学报,2014,34(11):1146.
12 Wang L, Yang C, et al. Corrosion performance of TC4 titanium alloy nitride in low pressure vacuum [J]. Foundary Technol,2014,35(3):503(in Chinese).
王亮,杨闯,杨玲,等. 低压真空渗氮处理TC4钛合金的腐蚀性能研究[J]. 铸造技术,2014,35(3):503.
13 Zhu Y Y, Xiong M M, Yang C, et al. The study of texture and performances for carbonnitriding layer based TC4 titanium alloy [J]. Mater Protect,2016,49(4):19(in Chinese).
祝园园,熊茫茫,杨闯,等. TA2钛合金真空脉冲气体氮化层的性能[J]. 材料保护,2016,49(4):19
14 Yang C, Liu J, Ma Y C, et al. Microstructure and property of va-cuum nitriding on TC4 titanium alloy [J]. Trans Mater Heat Treat,2015,36(7):188(in Chinese).
杨闯,刘静,马亚芹,等. TC4 钛合金真空渗氮组织与性能[J]. 材料热处理学报,2015,36(7):188.
15 Yang C, Liu J, Ma Y Q, et al. Influence of different pressure on va-cuum pulse nitriding of TC4 titanium alloy [J]. Surf Technol,2015,44(8):76(in Chinese).
杨闯,刘静,马亚芹,等. 不同压力对TC4 钛合金真空脉冲渗氮的影响[J]. 表面技术,2015,44(8):76. |
| No related articles found! |
|
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2017, Vol. 31 
