典型糖醇类相变材料考虑加热时间和过热温度的结晶特性研究

doi:10.11896/cldb.24040139

Abstract
Figure/Table
References
Related Citation (4)

Download:

Full Text ( PDF ) (9800KB)
Export: BibTeX | EndNote (RIS)

Abstract Sugar alcohols are widely regarded as high-performance medium-temperature phase change materials (PCMs) and have attracted significant attention. Investigating the crystallization behavior of sugar alcohol PCMs under varying heat storage temperatures and durations is crucial for assessing the heat release performance of thermal storage systems in practical applications. However, current research in this area remains insufficient. In this study, under a nitrogen (N₂) atmosphere, non-isothermal and isothermal testing methods were employed. Two parameters, supercooling degree (ΔT_sc) and heat release ratio (HRR), were introduced to investigate the crystallization behavior of erythritol, D-mannitol, and inositol as a function of superheating temperature and duration. The experimental results indicated that, during non-isothermal testing, the supercooling degrees of erythritol, D-mannitol, and inositol remained relatively stable at approximately 70 ℃, 46 ℃, and 37 ℃ within the degrees of superheating ranges of 70 ℃, 25 ℃, and 15 ℃, respectively, as heating duration increased. Their heat release ratios also remained relatively stable within the respective superheating ranges, approximately 68%, 91%, and 78%. The isothermal test results further showed that, at a degree of superheat of 10 ℃, the supercooling degrees of these sugar alcohols remained relatively stable over duration, although they were significantly lower than in the non-isothermal tests, at approximately 19.6 ℃, 1.6 ℃, and 1.3 ℃, respectively.

Key words： sugar alcohols PCMs crystallization characteristic supercooling degree heat release ratio

Published: 10 July 2025 Online: 2025-07-21

CLC number:

TB34

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WUSIMAN Kuerbanjiang
	WANG Tianhao
	SHI Lin
	DAI Xiaoye

Cite this article:

WUSIMAN Kuerbanjiang,WANG Tianhao,SHI Lin, et al. Study on the Crystallization Characteristics of Typical Sugar Alcohol Phase Change Materials Considering Heating Duration and Superheating Temperature[J]. Materials Reports, 2025, 39(13): 24040139-7.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.24040139 OR https://www.mater-rep.com/EN/Y2025/V39/I13/24040139

1 He Y L. Chinese Science Bulletin, 2016, 61(17), 1856 (in Chinese).
何雅玲. 科学通报, 2016, 61(17), 1856.
2 Xu Z Y, Wang R Z, Yang C. Energy, 2019, 176, 1037.
3 Steinmann W D, Bauer D, Jockenhfer H, et al. Energy, 2019, 183, 185.
4 Martín M. Computers & Chemical Engineering, 2022, 165, 107926.
5 El-Agouz S A, Zayed M E, Ghazala A M A, et al. Process Safety and Environmental Protection, 2022, 164, 595.
6 Du K, Calautit J, Eames P, et al. Renewable Energy, 2021, 168, 1040.
7 Nazir H, Batool M, Osorio F, et al. International Journal of Heat and Mass Transfer, 2019, 129, 491.
8 Barrio E, Godin A, Duquesne M, et al. Solar Energy Materials and Solar Cells, 2017, 159, 560.
9 Hérault D, Rodembusch F, Campo L, et al. Comptes Rendus Chimie, 2010, 13(5), 566.
10 Beaupere N, Soupremanien U, Zalewski L. Thermochimica Acta, 2018, 670, 184.
11 Kaizawa A, Maruoka N, Kawai A, et al. Heat Mass Transfer, 2008, 44, 763.
12 Miro L, Barreneche C, Ferrer G, et al. Thermochimica Acta, 2016, 627, 39.
13 Singh D K, Suresh S, Singh H, et al. Applied Thermal Engineering, 2017, 110, 564.
14 Nomura T, Zhu C, Sagara A, et al. Applied Thermal Engineering, 2015, 75, 481.
15 Shao X, Yang S, Wang C, et al. Energy, 2020, 209, 118483.
16 Solé A, Neumann H, Niedermaier S, et al. Solar Energy Materials and Solar Cells, 2014, 126, 125.
17 Neumann H, Niedermaier S, Gschwander S, et al. Thermochimica Acta, 2018, 660, 134.
18 Neumann H, Burger D, Taftanazi Y, et al. Solar Energy Materials and Solar Cells, 2019, 200, 109913.
19 Yang S, Shao X F, Fan L W. CIESC Journal, 2020, 71(2), 864 (in Chinese).
杨生, 邵雪峰, 范利武. 化工学报, 2020, 71(2), 864.
20 Zeng J, Zhou L, Zhang Y, et al. Journal of Thermal Analysis and Calorimetry, 2017, 129(3), 1291.
21 Shao X, Wang C, Yang Y, et al. Energy, 2018, 160, 1078.
22 Liu C, Cheng Q, Du P, et al. Journal of Energy Storage, 2023, 65, 107325.
23 Yin S, Han J, Zhang C, et al. Journal of Thermal Science, 2023, 32(6), 2093.
24 Salyan S, Suresh S. Advanced Powder Technology, 2018, 29(12), 3183.
25 Zhang Y, Jiang Y, Jiang Y. Measurement Science and Technology, 1999, 10(3), 201.
26 Luna A M P, Neumann H, Gschwander S. Applied Sciences, 2021, 11(12), 5448.
27 Wusiman K, Wang T H, Dai X Y, et al. Journal of Engineering Thermophysics, 2024, 45(8), 2223 (in Chinese).
库尔班江·乌丝曼, 王天浩, 戴晓业, 等. 工程热物理学报, 2024, 45(8), 2223.
28 Ma C, Wang Y, Xie S, et al. Journal of Energy Storage, 2023, 73, 108889.
29 Liu Y, Deng Y, Zheng J, et al. Solar Energy Materials and Solar Cells, 2022, 248, 112031.
30 Yuan M, Ren Y, Xu C, et al. Renewable Energy, 2019, 136, 211.
31 Adachi T, Daudah D, Tanaka G. ISIJ International, 2014, 54(12), 2790.