影响P91耐热钢焊缝金属冲击韧性的因素分析

doi:10.11896/cldb.22080097

材料导报

2024, Vol. 38

Issue (3): 22080097-5 https://doi.org/10.11896/cldb.22080097

金属与金属基复合材料

影响P91耐热钢焊缝金属冲击韧性的因素分析

李文清¹, 曹睿^1,*, 杨飞², 徐晓龙², 毛兴贵², 蒋勇², 闫英杰¹

1 兰州理工大学材料科学与工程学院,省部共建有色金属先进加工与再利用国家重点实验室,兰州 730050
2 四川大西洋焊接材料股份有限公司,四川自贡 643000

Analysis of Factors Affecting the Impact Toughness of P91 Heat-resistant Steel Weld Metal

LI Wenqing¹, CAO Rui^1,*, YANG Fei², XU Xionglong², MAO Xinggui², JIANG Yong², YAN Yingjie¹

1 The State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
2 Sichuan Atlantic Welding Materials Co., Ltd., Zigong 643000, Sichuan, China

摘要
参考文献
相关文章
推荐阅读
Metrics

下载:

全文 ( PDF ) ( 23260KB )
输出: BibTeX | EndNote (RIS)

摘要利用扫描电镜、光学显微镜、X射线衍射仪、电解萃取实验等研究了P91耐热钢焊缝金属冲击韧性不稳定的原因。结果表明,焊缝金属的组织为铁素体组织,在铁素体基体与晶界处分布着大量的析出相。析出相主要为M₂₃C₆型碳化物和氧化物夹杂,其中晶界处聚集的M₂₃C₆是影响焊缝金属冲击韧性的主要原因。通过对不同冲击韧性值的试样晶界处碳化物的面积分数统计发现,M₂₃C₆面积分数的增加导致焊缝金属的冲击韧性下降。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	李文清
	曹睿
	杨飞
	徐晓龙
	毛兴贵
	蒋勇
	闫英杰

关键词: P91耐热钢冲击韧性 M₂₃C₆碳化物

Abstract: The reasons for the instability of the impact toughness of P91 heat-resistant steel weld metal were investigated by scanning electron microscope, optical microscope, X-ray diffraction and electrolytic extraction experiment. The results show that the microstructure of the weld metal is mainly composed of ferrite and a large number of precipitates distributed at the ferrite matrix and grain boundary. The precipitates mainly consist of M₂₃C₆ carbide and oxide inclusions, among which aggregated M₂₃C₆ is the main reason affecting the impact toughness of the weld metal. According to the statistics of the area fraction of carbides at grain boundaries for specimens with different impact toughness values, it is found that the increase of M₂₃C₆ area fraction leads to the decrease of the impact toughness of the weld metal.

Key words: P91 heat-resistant steel impact toughness M₂₃C₆ carbide

出版日期: 2024-02-10 发布日期: 2024-02-19

ZTFLH:

TG441

基金资助: 国家自然科学基金(52175325;51961024;52071170);甘肃省教育厅“双一流”科研重点项目(GSSYLXM-03)

通讯作者: *曹睿,博士,兰州理工大学教授、博士研究生导师。获得甘肃省飞天学者和四川省天府学者。2003年6月兰州理工大学材料科学与工程学院参加工作至今。主要从事新材料和异种材料的焊接性、强韧性、腐蚀、变形、损伤及断裂行为研究等科研工作。发表SCI检索论文90余篇,发表中文核心期刊论文120余篇,完成著作2部。完成国家自然科学基金项目、甘肃省科研项目以及企业合作项目40余项。caorui@lut.edu.cn

作者简介: 李文清,2020年6月毕业于兰州工业学院,获得工学学士学位,现为兰州理工大学材料科学与工程学院硕士研究生。在曹睿老师的指导下进行课题研究,目前研究领域主要为焊缝金属强韧化的研究。

引用本文:

李文清, 曹睿, 杨飞, 徐晓龙, 毛兴贵, 蒋勇, 闫英杰. 影响P91耐热钢焊缝金属冲击韧性的因素分析[J]. 材料导报, 2024, 38(3): 22080097-5.
LI Wenqing, CAO Rui, YANG Fei, XU Xionglong, MAO Xinggui, JIANG Yong, YAN Yingjie. Analysis of Factors Affecting the Impact Toughness of P91 Heat-resistant Steel Weld Metal. Materials Reports, 2024, 38(3): 22080097-5.

链接本文:

https://www.mater-rep.com/CN/10.11896/cldb.22080097 或 https://www.mater-rep.com/CN/Y2024/V38/I3/22080097

1 Zhang X, Zeng Y, Cai W, et al. Materials Science and Engineering A, 2018, 728(13), 63.
2 Pandey C, Giri A, Mahapatra M M. Materials Science and Engineering A, 2016, 664(10), 58.
3 Pandey C, Giri A, Mahapatra M M. Materials Science and Engineering A, 2016, 657(7), 173.
4 Mahapatra M M. Journal of Materials Engineering and Performance, 2016, 25(6), 2195.
5 Soundararajan M, Kamaraj M, Arivazhagan B. Journal of Materials Research and Technology, 2019, 9(2), 2223.
6 Abe F, Taneike M, Sawada K. International Journal of Pressure Vessels and Piping, 2007, 84(2), 3.
7 Khajuria A, Akhtar M, Bedi R, et al. International Journal of Pressure Vessels and Piping, 2020, 188, 104246.
8 Zheng Y, Wang F, Garrison W M, et al. Metallurgical and Materials Transactions A, 2018, 49, 1.
9 Zhang S, Melfi T, Narayanan B K. Science and Technology of Welding and Joining, 2016, 21(2), 147.
10 Arivazhagan B, Prabhu R. Journal of Materials Engineering and Perfor-mance, 2009, 18(8), 999.
11 Zhang J B, Liu F, Fan D, et al. Transactions of Materials and Heat Treatment, 2017, 38(3), 108(in Chinese).
张建斌, 刘帆, 樊丁, 等. 材料热处理学报, 2017, 38(3), 108.
12 Pandey C, Mahapatra M M, Kumar P, et al. Journal of Alloys and Compounds, 2018, 743, 332.
13 Arivazhagan B, Vasudevan M, Kamaraj M. Metals and Materials International, 2015, 21(3), 538.
14 Hurtado-Nore A C, Danón C A, Luppo M I, et al. Procedia Materials Science, 2015, 8, 1089.
15 Pandey C, Mahapatra M M, Kumar P, et al. Archives of Civil and Mechanical Engineering, 2019, 19(2), 297.
16 Pandey C, Mahapatra M M, Kumar P. Materials Science and Engineering A, 2018, 731, 249.
17 Yin F S, Tian L Q, Xue B, et al. Metallurgical and Materials Transactions A, 2012, 43(7), 2203.
18 Yu X, Babu S S, Terasaki H, et al. Acta Materialia, 2013, 61(6), 2194.
19 Li J R, Zhang C L, Jiang B, et al. Journal of Alloys and Compounds, 2016, 685(15), 248.
20 Mishnev R, Dudova N, Dudko V, et al. Materials Science and Enginee-ring A, 2018, 730, 1.

[1]	李文清, 马景平, 曹睿, 徐晓龙, 杨飞, 毛兴贵, 蒋勇, 闫英杰. P91钢焊缝金属碳化物聚集程度的差异对焊缝金属冲击韧性的影响[J]. 材料导报, 2024, 38(20): 23090208-7.
[2]	李力敏, 党莹樱, 黄锦阳, 刘鹏, 李沛, 鲁金涛, 袁勇. 长期时效对镍铁基高温合金组织和冲击韧性的影响[J]. 材料导报, 2024, 38(18): 23050036-6.
[3]	王虎, 武少杰, 董翼纶, 程方杰. 热输入对埋弧增材厚壁构件微观组织与冲击韧性的影响[J]. 材料导报, 2024, 38(11): 22120217-5.
[4]	韩成, 曹睿. 硼在钢中的作用及表征方式[J]. 材料导报, 2022, 36(Z1): 21080164-4.
[5]	李伟, 曹睿, 闫英杰. 不同热处理态下粉末冶金花纹钢的组织性能及拉伸断裂行为[J]. 材料导报, 2022, 36(9): 21020104-7.
[6]	宋婕, 常英珂, 吴瑞德, 李琳, 张程煜. 13Cr11Ni2W2MoV马氏体热强不锈钢的韧-脆转变及脆化机理[J]. 材料导报, 2022, 36(4): 20120015-5.
[7]	董万龙, 曹睿, 蒋勇, 杨飞, 黄义芳, 徐晓龙, 陈剑虹. Cr-Mo-V耐热钢焊条电弧焊焊缝金属低温冲击韧性研究[J]. 材料导报, 2022, 36(15): 20120001-5.
[8]	陆由付, 王朝辉, 王学成, 樊振通, 肖绪荡. 桥面现浇混凝土细微裂缝用环氧灌浆材料的环境适应性[J]. 材料导报, 2022, 36(1): 20090252-7.
[9]	陈永庆, 闫英杰, 曹睿, 刘刚, 秦巍, 车洪艳, 王铁军. 原始粉末颗粒边界对FeCrAl合金冲击韧性的影响机理[J]. 材料导报, 2021, 35(6): 6131-6134.
[10]	甘杰, 何林, 李强, 杨晓峰, 范辉. 93W-5Ni-2Fe高密度钨合金冲击韧性关键影响因素研究[J]. 材料导报, 2020, 34(Z1): 304-306.
[11]	王婷玥, 邢书明, 敖晓辉, 王营. 压力对挤压铸造E级钢低温冲击韧性的影响[J]. 材料导报, 2020, 34(6): 6138-6143.
[12]	苏小虎, 栗卓新, 马思鸣, 李红, 张天理, KIM Hee Jin. 氧含量及夹杂物对高强钢金属芯焊丝E120C-K4熔敷金属冲击韧性的影响[J]. 材料导报, 2020, 34(11): 11049-11052.
[13]	张建斌, 刘帆, 薛飞. 热处理工艺对P91耐热钢中δ-铁素体和冲击性能的影响[J]. 《材料导报》期刊社, 2018, 32(8): 1318-1322.
[14]	张忠科, 张剑飞, 于洋, 王希靖. 厚板铝合金搅拌摩擦焊接头的冲击性能[J]. 材料导报, 2018, 32(22): 3936-3940.
[15]	傅定发,冷宇,高文理. 微合金元素Nb对低碳铸钢强度和冲击韧性的影响[J]. 《材料导报》期刊社, 2018, 32(2): 237-242.

[1]	Huanchun WU, Fei XUE, Chengtao LI, Kewei FANG, Bin YANG, Xiping SONG. Fatigue Crack Initiation Behaviors of Nuclear Power Plant Main Pipe Stainless Steel in Water with High Temperature and High Pressure[J]. Materials Reports, 2018, 32(3): 373 -377 .
[2]	Miaomiao ZHANG,Xuyan LIU,Wei QIAN. Research Development of Polypyrrole Electrode Materials in Supercapacitors[J]. Materials Reports, 2018, 32(3): 378 -383 .
[3]	Congshuo ZHAO,Zhiguo XING,Haidou WANG,Guolu LI,Zhe LIU. Advances in Laser Cladding on the Surface of Iron Carbon Alloy Matrix[J]. Materials Reports, 2018, 32(3): 418 -426 .
[4]	Huaibin DONG,Changqing LI,Xiahui ZOU. Research Progress of Orientation and Alignment of Carbon Nanotubes in Polymer Implemented by Applying Electric Field[J]. Materials Reports, 2018, 32(3): 427 -433 .
[5]	Xiaoyu ZHANG,Min XU,Shengzhu CAO. Research Progress on Interfacial Modification of Diamond/Copper Composites with High Thermal Conductivity[J]. Materials Reports, 2018, 32(3): 443 -452 .
[6]	Anmin LI,Junzuo SHI,Mingkuan XIE. Research Progress on Mechanical Properties of High Entropy Alloys[J]. Materials Reports, 2018, 32(3): 461 -466 .
[7]	Qingqing DING,Qian YU,Jixue LI,Ze ZHANG. Research Progresses of Rhenium Effect in Nickel Based Superalloys[J]. Materials Reports, 2018, 32(1): 110 -115 .
[8]	Yaxiong GUO,Qibin LIU,Xiaojuan SHANG,Peng XU,Fang ZHOU. Structure and Phase Transition in CoCrFeNi-M High-entropy Alloys Systems[J]. Materials Reports, 2018, 32(1): 122 -127 .
[9]	Changsai LIU,Yujiang WANG,Zhongqi SHENG,Shicheng WEI,Yi LIANG,Yuebin LI,Bo WANG. State-of-arts and Perspectives of Crankshaft Repair and Remanufacture[J]. Materials Reports, 2018, 32(1): 141 -148 .
[10]	Xia WANG,Liping AN,Xiaotao ZHANG,Ximing WANG. Progress in Application of Porous Materials in VOCs Adsorption During Wood Drying[J]. Materials Reports, 2018, 32(1): 93 -101 .

Viewed

Full text

Abstract

Cited

Shared

Discussed