| SPECIAL TOPIC: UHPC MATERIAL AND ENGINEERING APPLICATION |
|
|
|
|
|
| An Overview on Tensile Behavior of Ultra-high Performance Concrete |
| LIU Jianzhong1, 2, HAN Fangyu1, 2, ZHOU Huaxin1, 2, ZHANG Lihui1, 2, LIU Jiaping2, 3
|
1 Jiangsu Sobute New Materials Co. Ltd., Nanjing 211103;
2 State Key Laboratory of High Performance Civil Engineering Materials, Nanjing 210008;
3 School of Materials Science and Engineering, Southeast University, Nanjing 211189 |
|
|
|
|
Abstract Highly-effective synergistic interaction between high strength matrix and fiber is the source of outstanding perfor-mance advantages of UHPC, a new type of cement-based materials exhibiting ultra-high strength, high ductility, and excellent durability. From the perspectives of testing method, matrix and fiber, this paper reviews the development status of tensile mechanical behavior of UHPC. It also offers some conclusions and opinions of the authors: tensile behavior of UHPC should be studied using dog-bone sample and exhibits obvious size effect and strong sensitivity to loading rate; one effective approach to improving UHPC's tensile performance is to carefully tailor its composition and size distribution; fiber type has the most remarkable influence with respect to the tensile performance, which can benefit from both the increase of fiber reinforcing factor and the tailoring of fiber distribution. Finally, some suggestions are proposed for the further study in order to promote engineering applications of UHPC.
|
|
Published: 08 May 2018
|
|
|
|
|
1 Rossi P. Ultra-high performance fiber-reinforced concretes[J]. Concr Int, 2001, 23(12): 46.
2 AFGC-SETRA. Ultra-high performance fibre reinforced concretes-interim recommendations and annex[R]. France: AFGC Publications, 2002.
3 Liu J Z. Preparation and static, dynamic mechanical behavior of ultra-high performance concrete[D]. Nanjing: Southeast University, 2013 (in Chinese).
刘建忠. 超高性能水泥基复合材料制备技术及静态拉伸行为研究[D]. 南京:东南大学, 2013.
4 Zhang W H. Investigation of microstructure formation mechanism and dynamic mechanical behavior of UHPCC[D]. Nanjing: Southeast University, 2013(in Chinese).
张文华. 超高性能水泥基复合材料微结构形成机理与动态力学行为研究[D]. 南京:东南大学, 2013.
5 张云升,张文华,刘建忠. 超高性能水泥基复合材料[M].北京:科学出版社,2014.
6 Saleem M A, Mirmiran A, Xia J, et al. Ultra-high-performance concrete bridge deck reinforced with high-strength steel[J]. ACI Struct J, 2011, 108(5): 601.
7 Buitelaar P, Braam R, Kaptijn N. Reinforced high performance concrete overlay system for rehabilitation and strengthening of orthotropic steel bridge decks[C]∥Orthotropic Bridge Conference. Sacramento, USA, 2004: 384.
8 Voo Y L, Foster S J, Voo C C. Ultrahigh-performance concrete segmental bridge technology: Toward sustainable bridge construction[J]. J Bridge Eng, 2014, 20(8): B5014001.
9 Wille K, EI-Tawil S, Naaman A E. Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading[J]. Cem Concr Compos, 2014,48:53.
10 Tran N T, Trana,T K, Kima D J. High rate response of ultra-high-performance fiber-reinforced concretes under direct tension[J]. Cem Concr Res, 2015, 69:72.
11 Nguyen D L, Ryu G S, Koh K T, et al. Size and geometry depen-dent tensile behavior of ultra-high-performance fiber-reinforced concrete[J]. Composites Part B, 2014, 58:279.
12 Wille K, Naaman A E. Bond stress-slip behavior of steel fibers embedded in ultra high performance concrete[C]∥Proceedings of 18th European Conference on Fracture and Damage of Advanced Fiber-reinforced Cement-based Materials. Dresden: Aedification Publi-shers, 2010: 99.
13 Beglarigale A, YazIcI H. Pull-out behavior of steel fiber embedded in flowable RPC and ordinary mortar[J]. Constr Build Mater, 2015, 75: 255.
14 Wille K, Naaman A E. Pullout behavior of high-strength steel fibers embedded in ultra-high-performance concrete[J]. ACI Mater J, 2012, 109(4): 479.
15 Liu J, Han F, Cui G, et al. Combined effect of coarse aggregate and fiber on tensile behavior of ultra-high performance concrete[J]. Constr Build Mater, 2016, 121: 310.
16 Naaman A E, Reinhardt H W. Setting the stage: Toward perfor-mance based classification of FRC composites[C]∥Proceedings of 4th RILEM Symposium on High Performance Fiber Reinforced Cement composites (HPFRCC4). France: RILEM, 2003:1.
17 Wille K, Naaman A E, El-Tawil S. Ultra high performance fiber reinforced concrete (UHP-FRC) record performance under tensile loading[J]. ACI Constr Int J, 2011,33(9):35.
18 Pyo S, Wille K, El-Tawil S, et al. Strain rate dependent properties of ultra high performance fiber reinforced concrete (UHP-FRC) under tension[J]. Cem Concr Compos, 2015, 56: 15.
19 Tuyan M, YazIcI H. Pull-out behavior of single steel fiber from SIFCON matrix[J]. Constr Build Mater, 2012,35:571.
20 Abu-Lebdeh T, Hamoush S, Heard W,et al. Effect of matrix strength on pullout behavior of steel fiber reinforced very-high strength concrete composites[J]. Constr Build Mater, 2011,25:39.
21 Silva F A, Mobasher B, Soranakom C, et al. Effect of fiber shape and morphology on interfacial bond and cracking behaviors of sisal fiber cement based composites[J]. Cem Concr Compos, 2011,33(8):814.
22 Lee Y, Kang S T, Kim J K. Pullout behavior of inclined steel fiber in an ultra-high strength cementitious matrix[J]. Constr Build Mater, 2010;24(10):2030.
23 Li V C, Wu C, Wang S X, et al. Interface tailoring for strain-har-dening polyvinyl alcohol-engineered cementitous composite [J]. ACI Mater J, 2002, 99 (5):463.
24 Li V C, Wang Y, Backer S. Effect of incling angle,bundling and surface treatment on synthetic fibre pull-out from a cement matrix [J]. Composites, 1990, 21(2):132.
25 Li V C, Wang Y J, Backer S. A mircromechanical model of tensile-softening and bridging toughening of short random fiber reinforced brittle matrix composites [J]. Mech Phys Solids, 1991, 39(5):607.
26 Yang E H, Wang S, Yang Y, et al. Fiber-bridging constitutive law of engineered cementitious composites[J]. J Adv Concr Technol, 2008, 6(1): 181.
27 Li V C, Leung K Y. Steady-state and multiple cracking of short random fiber composites [J]. J Eng Mech, 1992, 118(11):2246.
28 Li V C. Postcrack scaling relations for fiber reinforced cementitious composites [J]. ASCE J Mater Civil Eng, 1992, 4(1):41.
29 Graybeal B A. Material property characterization of ultra-high performance concrete[R]. US: The National Academies of Sciences, Engineering and Medicine, 2006:188.
30 Charron J P, Denarie E, Bruehwiler E. Transport properties of water and glycolmin an ultra high performance fiber reinforced concrete (UHPFRC) under high tensile deformation[J]. Cem Concr Res 2008,38:689.
31 Graybeal B A. Tensile mechanical response of ultra-high-perfor-mance concrete[J]. Adv Civil Eng Mater, 2014, 4(2): 62.
32 Cunha V M C F, Barros J A O, Sena-Cruz J M. An integrated approach for modelling the tensile behaviour of steel fiber reinforced self-compacting concrete[J]. Cem Concr Res 2011,41:64.
33 Roth M J, Eamon C D, Slawson T R, et al. Ultra-high-strength glass fiber-reinforced concrete: Mechanical behavior and numerical modeling[J]. ACI Mater J 2010,107(2): 185.
34 Zhang J, Stang H, Li V. Experimental study on crack bridging in FRC under uniaxial fatigue tension[J]. J Mater Civ Eng, 2000,12(1):66.
35 Felicetti R, Gambarova P G, Sora M N, et al. Mechanical beha-viour of HPC and UHPC in direct tension at high temperature and after cooling[C]∥Fifth RILEM Symposium on Fibre-reinforced Concretes. France: RILEM, 2000: 749.
36 Park S H, Kim D J, Ryu G S, et al. Tensile behavior of ultra high performance hybrid fiber reinforced concrete[J]. Cem Concr Compos, 2012, 34(2): 172.
37 Wille K, Kim D J, Naaman A E. Strain-hardening UHP-FRC with low fiber contents[J]. Mater Struct, 2011, 44(3): 583.
38 Yoo D Y, Banthia N, Kang S T, et al. Size effect in ultra-high-performance concrete beams[J]. Eng Fract Mech, 2016, 157: 86.
39 Mahmud G H, Yang Z, Hassan A M. Experimental and numerical studies of size effects of ultra high performance steel fibre reinforced concrete (UHPFRC) beams[J]. Constr Build Mater, 2013, 48:1027.
40 Yoo D Y, Kang S T, Yoon Y S. Effect of fiber length and placement method on flexural behavior, tension softening curve, and fiber distribution characteristics of UHPFRC[J]. Constr Build Mater, 2014,64:67.
41 Yoo D Y, Kang S T, Lee J H, et al. Effect of shrinkage reducing admixture on tensile and flexural behaviors of UHPFRC considering fiber distribution characteristics[J]. Cem Concr Res 2013,54:180.
42 Sanal I, Zihnioglu N O. To what extent does the fiber orientation affect mechanical performance?[J]. Constr Build Mater, 2013, 44: 671.
43 Abrishambaf A, Cunha V M C F, Barros J A O. The influence of fibre orientation on the post-cracking tensile behaviour of steel fibre reinforced self-compacting concrete[J]. Frattura ed Integrità Strutturale, 2015, 31: 54.
44 Kang S T, Kim J K. The relation between fiber orientation and tensile behavior in an ultra high performance fiber reinforced cementitious composites (UHPFRCC)[J]. Cem Concr Res, 2011, 41(10): 1001.
45 Wang S, Li V C. Tailoring of pre-existing flaws in ECC matrix for saturated strain hardening[C]∥Proc FRAMCOS. US, 20045: 1005.
46 Li V C. Tailoring ECC for special attributes: A review[J]. Int J Concr Struct Mater, 2012, 6(3): 135.
47 Liu J, Sun W, Miao C, et al. Assessment of fiber distribution in steel fiber mortar using image analysis[J]. J Wuhan University of Technology: Mater Sci Ed, 2012, 27(1): 166.
48 Pyo S, Alkaysi M, El-Tawil S. Crack propagation speed in ultra high performance concrete (UHPC)[J]. Constr Build Mater, 2016, 114: 109.
49 Wille K, El-Tawil S, Naaman A E. Strain rate dependent tensile behavior of ultrahigh performance fiber reinforced concrete[C]∥RILEM Proceedings of HPFRCC 6, Ann Arbor. MI, USA, 2012:382.
50 Cadoni E, Meda A, Plizzari G A. Tensile behaviour of FRC under high strain-rate[J]. Mater Struct, 2009, 42: 1283.
51 Tran T K, Kim D J. Investigating direct tensile behavior of high performance fiber reinforced cementitious composites at high strain rates[J]. Cem Concr Res,2013,50:62.
52 Tran T K, Kim D J. High strain rate effects on direct tensile beha-vior of high performance fiber reinforced cementitious composites[J]. Cem Concr Compos, 2014,45:186.
53 Kim D J, El-Tawil S, Naaman A E. Rate-dependent tensile beha-vior of high performance fiber reinforced cementitious composites[J]. Mater Struct, 2009,42:399.
54 Caverzan A, Cadoni E, Di Prisco M. Tensile behaviour of high performance fibre reinforced cementitious composites at high strain rates[J]. Int J Impact Eng, 2012,45:28.
55 Mechtcherine V, Siva F, et al. Behavior of strain-hardening cement-based composites under high strain rates[J]. J Adv Concr Technol, 2011,9:51.
56 Mechtcherine V, Millon O, Butler M, et al, Mechanical behaviour of strain hardening cement-based composites under impact loading[J]. Cem Concr Compos,2011,33:1.
57 Ranade R, Li V C, Heard W F. Tensile rate effects in high strength-high ductility concrete[J]. Cem Concr Res, 2015, 68: 94.
58 Wille K, Boisvert-Cotulio C. Material efficiency in the design of ultra-high performance concrete[J]. Constr Build Mater, 2015, 86: 33.
59 Wu Z M, Shi C J, Khayat K H. Influence of silica fume content on microstructure development and bond to steel fiber in ultra-high strength cement-based materials (UHSC)[J]. Cem Concr Compos, 2016, 71: 97.
60 Kim D J, Wille K, Naaman A E, et al. Strength development tensile behavior of strain hardening fiber reinforced concrete[M]∥High Performance Fiber Reinforced Cement Composites 6. France: RELIM,2012:3.
61 Rossi P. Influence of fibre geometry and matrix maturity on the mechanical performance of ultra high-performance cement-based composites [J]. Cem Concr Compos, 2013, 37: 246.
62 Yu R, Spiesz P, Brouwers H J H. Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC)[J]. Cem Concr res, 2014, 56: 29.
63 Yu R, Spiesz P, Brouwers H J H. Development of ultra-high performance fibre reinforced concrete (UHPFRC): Towards an efficient utilization of binders and fibres [J]. Constr Build Mater, 2015, 79: 273.
64 Qian S Z, Li V C. Simplified inverse method for determining the tensile strain capacity of strain hardening cementitious composites[J]. J Adv Concr Technol, 2007, 5(2): 235.
65 Kang S T, Lee Y, Park Y D, et al. Tensile fracture properties of an ultra high performance fiber reinforced concrete (UHPFRC) with steel fiber[J]. Compos Struct, 2010, 92(1): 61.
66 Baby F, Graybeal B, Marchand P, et al. UHPFRC tensile behavior characterization: Inverse analysis of four-point bending test results[J]. Mater Struct, 2013, 46(8): 1337.
67 Ma J, Orgass M, Dehn F, et al. Comparative investigations on ultra-high performance concrete with and without coarse aggregates[C]∥Proceedings of International Symposium on Ultra High Performance Concrete. Germany, 2004:205.
68 Kim D J, Park S H, Ryu G S, et al. Comparative flexural behavior of hybrid ultra high performance fiber reinforced concrete with different macro fibers[J]. Constr Build Mater, 2011, 25(11): 4144.
69 Yoo D Y, Kim S, Park G J, et al. Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-perfor-mance fiber-reinforced cement composites[J]. Compos Struct, 2017, 174: 375.
70 Kim D, El-Tawil S, Naaman A E. High tensile strength strain-hardening FRC composites with less than 2% fiber content[C]∥Proceedings of Second International Symposium on Ultra High Performance Concrete. Kassel, Germany, 2008:169.
71 Wille K, Naaman A E, El-Tawil S, et al. Ultra-high performance concrete and fiber reinforced concrete: Achieving strength and ductility without heat curing[J]. Mater Struct, 2012, 45(3): 309.
72 Feng J, Sun W W, Wang X M, et al. Mechanical analyses of hooked fiber pullout performance in ultra-high-perfor-mance concrete[J]. Constr Build Mater, 2014, 69: 403.
73 Xu M, Hallinan B, Wille K. Effect of loading rates on pullout behavior of high strength steel fibers embedded in ultra-high perfor-mance concrete[J]. Cem Concr Compos, 2016, 70: 98.
74 Benson S D P, Karihaloo B L. CARDIFRC-development and mechanical roperties. Part Ⅲ: Uniaxial tensile response and other mechanical roperties[J]. Mag Concr Res, 2005;57(8):433.
75 Farhat F A, Nicolaides D, Karihaloo A, et al. High performance fiber-reinforced cementitious composite (CARDIFRC)— Performance and pplication to retrofitting[J]. Eng Fract Mech 2007;74(1-2):151.
76 Rossi P, Antonio A, Parant E, et al Bending and compressive behaviors of a new cement composite[J]. Cem Concr Res, 2005,35(1):27.
77 Rossi P. High performance multimodal fiber reinforced cement composite HPMFRCC: The LCPC experience[J]. ACI Mater J, 1997,94(6):478.
78 Habel K. Structural behaviour of elements combining ultra-high performance fibre reinforced concrete (UHP-FRC) and reinforced concrete[D]. Switzerland: Ecole Polytechnique Federale de Lausanne,2004.
79 Rossi P, Tailhan J L. Uniaxial tensile test on a new cement compo-site having a hardening behaviour[C]∥Sixth RILEM Symposium in Fibre-reinforced Concretes (FRC). Varenna, Italy,2004.
80 Yoo D Y, Shin H O, Yang J M, et al. Material and bond properties of ultra high performance fiber reinforced concrete with micro steel fibers[J]. Composites Part B, 2014, 58: 122.
81 Aydin S, Baradan B. The effect of fiber properties on high perfor-mance alkaliactivated slag/silica fume mortars[J]. Compos Part B: Eng, 2013,45(1):63.
82 Yoo D Y, Zi G, Kang S T, et al. Biaxial flexural behavior of ultra-highperformance fiber-reinforced concrete with different fiber lengths and placement methods[J]. Cem Concr Compos, 2015,63:51.
83 Yoo D Y, Kang S T, Yoon Y S. Enhancing the flexural perfor-mance of ultra-highperformance concrete using long steel fibers[J]. Compos Struct, 2016,147:220.
84 Ferrara L. High performance fiber reinforced self-compacting concrete (HPFRSCC): A “smart material” for high end engineering applications[C]∥3rd International Workshop on Heterogeneous Architectures and Computing. Madrid, 2012:325.
85 Kang S T, Kim J K. Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution[J]. Constr Build Mater, 2012,28(1):57.
86 Yang I H, Joh C, Kim B S. Structural behavior of ultra high performance concrete beams subjected to bending[J]. Eng Struct, 2010,32(11):3478.
87 Cunha V M C F, Barros J A O, Sena-Cruz J M, Pullout behaviour of steel fibres in self compacting concrete[J]. ASCE Mater Civil Constr, 2010,22:1.
88 Ponikiewski T, Katzer J, Bugdol M, et al. X-ray computed tomography harnessed to determine 3D spacing of steel fibres in self compacting concrete (SCC) slabs[J]. Constr Build Materi, 2015, 74: 102.
89 Ponikiewski T, Katzer J, Bugdol M, et al. Steel fibre spacing in self-compacting concrete precast walls by X-ray computed tomography[J]. Mater Struct, 2015, 48(12): 3863.
90 Ferrara L, Meda A. Relationships between fibre distribution, workability and the mechanical properties of SFRC applied to precast roof elements[J]. Mater Struct,2006,39:411.
91 Kim S W, Kang, S T, Park, J J, et al. Effect of filling method on fibre orientation and dispersion and mechanical properties of UHPC[C]∥Proceedings of Second International Symposium on Ultra High Performance Concrete. Kassel, Germany, 2008: 185.
92 Liu J, Li C, Liu J, et al. Characterization of fiber distribution in steel fiber reinforced cementitious composites with low water-binder ratio[J]. Indian J Eng Mater Sci, 2011, 18:449.
93 Liu J, Li C, Liu J, et al. Study on 3D spatial distribution of steel fibers in fiber reinforced cementitious composites through micro-CT technique[J]. Constr Build Mater, 2013, 48: 656. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2017, Vol. 31 
