骨组织工程镁基支架的制备研究进展

doi:10.11896/cldb.22050324

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (34823KB)
Export: BibTeX | EndNote (RIS)

Abstract Bone tissue engineering provides an important approach for the treatment of damaged bone and diseased bone. Recently, the research on fabricating scaffolds with bone reconstruction, high strength, and good biocompatibility, has been one of the most popular topics and technical difficulties in the application of bone tissue engineering scaffolds. The types and preparation methods of scaffold material are major factors affecting its structure and properties. Magnesium-based alloys have attracted widespread attention because of its outstanding performance in biocompatibility and degradation behavior, and have been considered as a candidate class of promising scaffold materials for bone tissue enginee-ring. The preparation methods of magnesium-based scaffolds for bone tissue engineering include melt foaming, infiltration casting, solid/gas eutectic directional solidification and additive manufacturing, etc. However, the existing preparation methods still need to be further studied in the aspects of fine control of pore structure and the effect of pore-making residues on the biocompatibility of magnesium-based scaffolders. This article reviews the preparation methods of magnesium-based scaffolds used in bone tissue engineering, analyzes the main factors affecting pore structure and properties of scaffolds, summarizes the advantages and disadvantages of each preparation method, and discusses the trends of future research.

Key words： bone tissue engineering magnesium-based scaffold preparation method pore structure

Published: 25 February 2024 Online: 2024-03-01

CLC number:

TG146

Fund:National Natural Science Foundation of China (51864026), and Science and Technology Major Project of Yunnan Province (202202AG050011).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Zaijiu
	XIA Chenping
	LIU Mingzhao
	JIN Qinglin

Cite this article:

LI Zaijiu,XIA Chenping,LIU Mingzhao, et al. Research Progress of Preparation of Magnesium-based Scaffolds for Bone Tissue Engineering[J]. Materials Reports, 2024, 38(4): 22050324-11.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22050324 OR http://www.mater-rep.com/EN/Y2024/V38/I4/22050324

1 Bran G M, Stern-Straeter J, Hörmann K, et al. Archives of Medical Research, 2008, 39, 467.
2 Dzobo K, Thomford N E, Senthebane D A, et al. Stem Cells International, 2018, 2018, 1.
3 Henkel J, Woodruff M A, Epari D R, et al. Bone Research, 2013, 1, 216.
4 Seitz H, Rieder W, Irsen S, et al. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2005, 74, 782.
5 Kamboj N, Ressler A, Hussainova I. Materials, 2021, 14, 5338.
6 No Y J, Nguyen T, Lu Z F, et al. Bone, 2021, 153, 116147.
7 Liu X H, Ma P X. Annals of Biomedical Engineering, 2004, 32, 477.
8 Guo L Q, Liang Z H, Yang L, et al. Journal of Controlled Release, 2021, 338, 571.
9 Huaye Zhuang, Yong Han, Ailing Feng. Materials Science and Enginee-ring: C, 2008, 28, 1462.
10 Eivazzadeh-Keihan R, Bahojb Noruzi E, Khanmohammadi Chenab K, et al. Journal of Tissue Engineering and Regenerative Medicine, 2020, 14, 1687.
11 Malladi L, Mahapatro A, Gomes A S. Materials Technology, 2018, 33, 173.
12 Ryan G, Pandit A, Apatsidis D P. Biomaterials, 2006, 27, 2651.
13 Alvarez K, Nakajima H. Materials, 2009, 2, 790.
14 Zheng Y F, Gu X N, Witte F. Materials Science and Engineering: R: Reports, 2014, 77, 1.
15 Cheng J, Liu B, Wu Y H, et al. Journal of Materials Science & Techno-logy, 2013, 29, 619.
16 Dayue Jiang, Fuda Ning, Ying Wang. Journal of Materials Processing Technology, 2021, 289, 116952.
17 Dargusch M S, Dehghan-Manshadi A, Shahbazi M, et al. ACS Biomaterials Science & Engineering, 2019, 5, 1686.
18 Ren H Z, Pan C, Liu Y C, et al. Materials Chemistry and Physics, 2022, 289, 126458.
19 Yao R H, Han S Y, Sun Y H, et al. Biomaterials Advances, 2022, 138, 212968.
20 Wu H Z, Xie X X, Wang J, et al. Journal of Materials Research and Technology, 2021, 13, 1779.
21 Li Y, Jahr H, Lietaert K, et al. Acta Biomaterialia, 2018, 77, 380.
22 Wang X J, Xu S Q, Zhou S W, et al. Biomaterials, 2016, 83, 127.
23 Shuai C J, Li S, Peng S P, et al. Materials Chemistry Frontiers, 2019, 3, 544.
24 Song G L. Corrosion Science, 2007, 49, 1696.
25 Kicheol Hong, Hyeji Park, Yunsung Kim, et al. Journal of the Mechanical Behavior of Biomedical Materials, 2019, 98, 213.
26 Morgenthal I, Andersen O, Kostmann C, et al. Advanced Engineering Materials, 2014, 16, 309.
27 Staiger M P, Pietak A M, Huadmai J, et al. Biomaterials, 2006, 27, 1728.
28 Qin Y, Wen P, Guo H, et al. Acta Biomaterialia, 2019, 98, 3.
29 Tsuruga E, Takita H, Itoh H, et al. The Journal of Biochemistry, 1997, 121, 317.
30 Thavornyutikarn B, Chantarapanich N, Sitthiseripratip K, et al. Progress in Biomaterials, 2014, 3, 61.
31 Amini A R, Laurencin C T, Nukavarapu S P. Critical Reviews^TM in Biomedical Engineering, 2012, 40, 363.
32 Karageorgiou V, Kaplan D. Biomaterials, 2005, 26, 5474.
33 Zhang X, Li X W, Li J G, et al. Key Engineering Materials, 2013, 544, 276.
34 Zhang X, Li X W, Li J G, et al. Materials Science and Engineering: C, 2014, 42, 362.
35 Zhang X, Li X W, Li J G, et al. Progress in Natural Science: Materials International, 2013, 23, 183.
36 Jiang G F, He G. Materials Science and Engineering: C, 2014, 43, 317.
37 Wen C E, Yamada Y, Shimojima K, et al. Materials Letters, 2004, 58, 357.
38 Zhao J H, Wu H, Wang L T, et al. Biomaterials Advances, 2022, 134, 112719.
39 Garimella A, Rathi D, Jangid R, et al. Materials Today: Proceedings, 2022, 50, 2276.
40 Garimella A, Ghosh S B, Bandyopadhyay-Ghosh S, et al. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2022, 111, 463.
41 Zhang E L, Yin D S, Xu L P, et al. Materials Science and Engineering: C, 2009, 29, 987.
42 Zhang B P, Hou Y L, Wang X D, et al. Materials Science and Enginee-ring: C, 2011, 31, 1667.
43 Zhang S X, Li J N, Song Y, et al. Materials Science and Engineering: C, 2009, 29, 1907.
44 Gu X N, Zheng Y F, Cheng Y, et al. Biomaterials, 2009, 30, 484.
45 Sanchez A H M, Luthringer B J C, Feyerabend F, et al. Acta Biomate-rialia, 2015, 13, 16.
46 Hou R Q, Scharnagl N, Feyerabend F, et al. Corrosion Science, 2018, 132, 35.
47 Saad A P M, Jasmawati N, Harun M N, et al. Corrosion Science, 2016, 112, 495.
48 Cheng M Q, Wahafu T, Jiang G F, et al. Scientific Reports, 2016, 6, 1.
49 Bobe K, Willbold E, Haupt M, et al. Acta Biomaterialia, 2022, 148, 389.
50 Bobe K, Willbold E, Morgenthal I, et al. Acta Biomaterialia, 2013, 9, 8611.
51 Kleer N, Julmi S, Gartzke A K, et al. Materialia, 2019, 8, 100436.
52 Kleer-Reiter N, Julmi S, Feichtner F, et al. Biomedical Materials, 2021, 16, 035037.
53 Han X, Zhang J S, Xie X, et al. Development and Application of Mate-rials, 2017, 32(6), 69(in Chinese).
韩茜, 张江溯, 谢霄, 等. 材料开发与应用, 2017, 32(6), 69.
54 Luo H J, Zhang L, Xu Z G, et al. Materials Science Forum, 2013, 749, 356.
55 Yang D H, Hur B Y, Yang S R. Journal of Alloys and Compounds, 2008, 461, 221.
56 Hur B Y, Zhao R. Applied Mechanics and Materials, 2011, 121, 75.
57 Xu Z G, Fu J W, Luo T J, et al. Materials & Design, 2012, 34, 40.
58 Yang D H, Yang S R, Wang H, et al. Materials Science and Enginee-ring: A, 2010, 527, 5405.
59 Xia X C, Feng J L, Ding J, et al. Materials & Design, 2015, 74, 36.
60 Huang W Z, Luo H J, Zhang L, et al. Materials Science Forum, 2018, 933, 282.
61 Dong Q S, Li Y, Jiang H Q, et al. Journal of Magnesium and Alloys, 2021, 9, 1329.
62 Kirkland N T, Kolbeinsson I, Woodfield T, et al. International Journal of Modern Physics B, 2009, 23, 1002.
63 Staiger M P, Kolbeinsson I, Kirkland N T, et al. Materials Letters, 2010, 64, 2572.
64 San Marchi C, Mortensen A. Acta Materialia, 2001, 49, 3959.
65 Conde Y, Despois J F, Goodall R, et al. Advanced Engineering Mate-rials, 2006, 8, 795.
66 Lietaert K, Weber L, Van Humbeeck J, et al. Journal of Magnesium and Alloys, 2013, 1, 303.
67 Wang X F, Li Z D, Huang Y J, et al. Materials & Design, 2014, 64, 324.
68 Jiang G F, He G. Materials Science and Engineering: C, 2014, 43, 317.
69 Jia G Z, Hou Y, Chen C X, et al. Materials & Design, 2018, 140, 106.
70 Jia G Z, Chen C X, Zhang J, et al. Corrosion Science, 2018, 144, 301.
71 Madden L R, Mortisen D J, Sussman E M, et al. Proceedings of the National Academy of Sciences of the United States of America, 2010, 107, 15211.
72 Oliviero O, Ventre M, Netti P A. Acta Biomaterialia, 2012, 8, 3294.
73 Bakhsheshi-Rad H R, Dayaghi E, Ismail A F, et al. Transactions of Nonferrous Metals Society of China, 2019, 29, 984.
74 Wen C E, Mabuchi M, Yamada Y, et al. Scripta Materialia, 2001, 45, 1147.
75 apek J, Vojtěch D. Materials Science and Engineering: C, 2014, 35, 21.
76 apek J, Vojtěch D. Key Engineering Materials, 2014, 592, 342.
77 Mutlu I. Transactions of Nonferrous Metals Society of China, 2018, 28, 114.
78 Dutta S, Bavya Devi K, Roy M. Advanced Powder Technology, 2017, 28, 3204.
79 Wen C E, Yamada Y, Shimojima K, et al. Materials Letters, 2004, 58, 357.
80 Wen C E, Yamada Y, Shimojima K, et al. Materials Science Forum, 2003, 419, 1001.
81 Zhou C X, Liu Y, Zhang H W, et al. Transactions of Nonferrous Metals Society of China, 2020, 30, 1524.
82 Liu Y, Li Y X, Wan J, et al. Materials Science and Engineering: A, 2005, 402, 47.
83 Zhang H W, Li Y X, Liu Y. Acta Metallurgica Sinica, 2007, 43(6), 589(in Chinese).
张华伟, 李言祥, 刘源. 金属学报, 2007, 43(6), 589.
84 Zhou C X, Liang G Q, Liu Y, et al. Journal of Magnesium and Alloys, 2022, 10, 2137.
85 Liu M Z, Li Z J, Li F, et al. Materials Letters, 2022, 315, 131920.
86 Zhou C X, Liu Y, Zhang H W, et al. Metallurgical and Materials Tran-sactions A, 2020, 51, 3238.
87 Wang Z, Wu W W, Qian G A, et al. Engineering Fracture Mechanics, 2019, 214, 149.
88 Bhuvanesh Kumar M, Sathiya P. Thin-Walled Structures, 2021, 159, 107228.
89 Tofail S A M, Koumoulos E P, Bandyopadhyay A, et al. Materials Today, 2018, 21, 22.
90 Liu G, Zhang X F, Chen X L, et al. Materials Science and Engineering: R: Reports, 2021, 145, 100596.
91 ASTM International. Standard terminology for additive manufacturing technologies, 2012, F2792-12a.
92 Wei K W, Gao M, Wang Z M, et al. Materials Science and Engineering:A, 2014, 611, 212.
93 Tan X P, Tan Y J, Chow C S L, et al. Materials Science and Enginee-ring: C, 2017, 76, 1328.
94 Sing S L, An J, Yeong W Y, et al. Journal of Orthopaedic Research, 2016, 34, 369.
95 Wang P, Gammer C, Brenne F, et al. Materials Science and Enginee-ring: A, 2018, 711, 562.
96 Liu J L, Yu H J, Chen C Z, et al. Optics and Lasers in Engineering, 2017, 93, 195.
97 Wang L Z, Wang S, Hong X F. Journal of Manufacturing Processes, 2018, 35, 492.
98 Zhang D Y, Wang W D, Guo Y W, et al. Journal of Materials Processing Technology, 2019, 268, 25.
99 Biffi C A, Fiocchi J, Tuissi A. Journal of Alloys and Compounds, 2018, 755, 100.
100 Zhou X, Liu X H, Zhang D D, et al. Journal of Materials Processing Technology, 2015, 222, 33.
101 Ng C C, Savalani M M, Lau M L, et al. Applied Surface Science, 2011, 257, 7447.
102 Wu J J, Wang L Z. Journal of Materials Research, 2018, 33, 2752.
103 Li Y, Zhou J, Pavanram P, et al. Acta Biomaterialia, 2018, 67, 378.
104 Li Y, Jahr H, Zhang X Y, et al. Additive Manufacturing, 2019, 28, 299.
105 Do A V, Khorsand B, Geary S M, et al. Advanced Healthcare Mate-rials, 2015, 4, 1742.
106 Nguyen T L, Staiger M P, Dias G J, et al. Advanced Engineering Materials, 2011, 13, 872.
107 Gangireddy S, Gwalani B, Liu K, et al. Additive Manufacturing, 2019, 26, 53.
108 Zumdick N A, Jauer L, Kersting L C, et al. Materials Characterization, 2019, 147, 384.
109 Wei K W, Wang Z M, Zeng X Y. Materials Letters, 2015, 156, 187.
110 Cao X J, Jahazi M, Immarigeon J P, et al. Journal of Materials Proces-sing Technology, 2006, 171, 188.
111 Yan C Z, Hao L, Hussein A, et al. Materials Science and Engineering: C, 2017, 75, 1515.
112 Yuan L, Ding S, Wen C. Bioactive Materials, 2019, 4, 56.