INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
Application of the He-Hutchinson Model in the Study of Continuous Ceramic Fiber Toughened Ceramic Matrix Composites |
MA Xin1, LIU Haitao1,*, JIANG Ru2,3, SUN Xun1
|
1 Science and Technology on Advanced Ceramic Fibers and Composites Laboratory, College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China 2 School of Physics and Electronic Science, Hunan University of Science and Technology, Xiangtan 411201, Hunan, China 3 Key Laboratory of Intelligent Sensors and Advanced Sensing Materials of Hunan Province, Hunan University of Science and Technology, Xiangtan 411201, Hunan, China |
|
|
Abstract The famous He-Hutchinson (H-H) model can predict the propagation of matrix cracks at the interface, which based on the energy release rate criterion of crack propagation, and it has an essential role in toughening design in continuous ceramic fiber reinforced ceramic matrix compo-sites (CMCs). However, there is no literature review on H-H model in the field of CMCs. In this paper, the mechanical basis and simplification content of H-H model in CMCs research are firstly introduced, and the crack deflection criterion is obtained based on fracture energy and elastic mismatch coefficient of material components. Moreover, the measurement methods and characteristics of micro-mechanical parameters (including in-situ elastic modulus, material fracture energy and interface debonding energy) are systematically summarized, which based on the current measurement methods of material micro-mechanical parameters and the CMCs characteristics of brittle and complex microstructure. Also, the application progress of H-H model in porous matrix CMCs and interface phase CMCs is demonstrated, which based on in-situ micromechanical parameters. Finally, the existing problems of H-H model are pointed out and some suggestions for its further development are put forward.
|
Published: 10 February 2024
Online: 2024-02-19
|
|
Fund:Natural Science Foundation for Distinguished Young Scholars of Hunan Province (2020JJ2032), andNational Science and Technology Major Project (J2019-V1-0014-0129). |
|
|
1 Zhang W, Xiang Y, Peng Z H, et al. Advanced Ceramics, 2021, 42(3), 170(in Chinese). 张稳, 向阳, 彭志航, 等. 现代技术陶瓷, 2021, 42(3), 170. 2 Liu H T. Continuous alumina fiber toughened ceramic matrix composites, Science Press, China, 2022, pp. 310 (in Chinese). 刘海韬. 连续氧化铝纤维增韧陶瓷基复合材料, 科学出版社, 2022, pp. 310. 3 Li L, Xia Z. In:Advances in ceramic matrix composites (second edition), Low I M, ed., Woodhead, UK, 2018, pp. 355. 4 Fan X, Dang X, Ma Y, et al. Ceramics International, 2019, 45(17), 23104. 5 Liu H T, Yang L W, Sun X, et al. Carbon, 2016, 109, 435. 6 Zhang H, Song Y D. Journal of Aerospace Power, 2007, 22(10), 1730(in Chinese). 张鸿, 宋迎东. 航空动力学报, 2007, 22(10), 1730. 7 Gong J H. Advanced Ceramics, 2021, 42(C2), 287(in Chinese). 龚江宏. 现代技术陶瓷, 2021, 42(C2), 287. 8 Zhang R, Zhang X, Kang J, et al. Theoretical & Applied Fracture Mechanics, 2021, 114, 103037. 9 Liu Y Z. Research on crack propagation and fracture mode of domestic composite for large aircraft. Master's Thesis, Harbin Engineering University, China, 2009 (in Chinese). 刘易卓. 大飞机用国产复合材料裂纹扩展与断裂模式的研究. 硕士学位论文, 哈尔滨工程大学, 2009. 10 He M Y, Hutchinson J W. International Journal of Solids and Structures, 1989, 25(9), 1053. 11 Dundurs J, Bogy D B. Journal of Applied Mechanics, 1969, 35(3), 650. 12 Fujita H, Jefferson G, McMeeking R M, et al. Journal of the American Ceramic Society, 2004, 87(2), 261. 13 Liu F, Yi M, Ran L, et al. Surfaces and Interfaces, 2021, 23, 100951. 14 Wang Y, Liu H, Cheng H, et al. Ceramics International, 2015, 41(1), 1065. 15 Shimoda K, Hinoki T, Park Y. Composites Part A: Applied Science and Manufacturing, 2018, 115, 397. 16 Xu Z, Sun X, Xiong K, et al. Ceramics International, 2021, 47(5), 5896. 17 Chen W H, Wang L Y, Zhang H Y, et al. Explosion and Shock Waves, 2021, 41(4), 109(in Chinese). 陈伟华, 王丽燕, 张晗翌, 等. 爆炸与冲击, 2021, 41(4), 109. 18 General Administration of Quality Supervision. GB/T 23806-2009. Fine ceramics (advanced ceramics, advanced technical ceramics)—Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam(SEPB) method, Standards Press of China, China, 2009(in Chinese). 中华人民共和国国家质量监督检验检疫总局. GB/T 23806-2009. 精细陶瓷断裂韧性试验方法—单边预裂纹梁(SEPB)法, 质检出版社, 2009. 19 Tattersall H G, Tappin G. Journal of Materials Science, 1966, 1(3), 296. 20 BS ISO 18608-2017. Fine ceramics (advanced ceramics, advanced technical ceramics), British Standards Institution, 2017. 21 Oliver W C, Pharr G M. Journal of Materials Research, 2004, 19(1), 3. 22 ISO 14577-1-2015. Metallic materials: instrumented indentation test for hardness and materials parameters, International Organization for Stan-dardization, 2015. 23 Liu H T, Yang L W, Han S. Journal of Inorganic Materials, 2018, 33(7), 711(in Chinese). 刘海韬, 杨玲伟, 韩爽. 无机材料学报, 2018, 33(7), 711. 24 Yang L W, Wang J Y, Liu H T, et al. Composites Part B: Engineering, 2017, 119, 79. 25 Li Y, Zhou M. Journal of the Mechanics and Physics of Solids, 2013, 61(2), 489. 26 Leatherbarrow A, Wu H. Journal of the European Ceramic Society, 2012, 32(3), 579. 27 Sebastiani M, Johanns K E, Herbert E G, et al. Current Opinion in Solid State and Materials Science, 2015, 19(6), 324. 28 Frazer D, Abad M D, Krumwiede D, et al. Composites Part A: Applied Science and Manufacturing, 2015, 70, 93. 29 Mueller M G, Pejchal V, agar G, et al. Acta Materialia, 2015, 86(14), 385. 30 Sebastiani M, Johanns K E, Herbert E G, et al. Philosophical Magazine, 2015, 95(16-18), 1928. 31 Sun X, Jiang R, Liu H, et al. RSC Advances, 2019, 9(45), 26373. 32 Henry R, Blay T, Douillard T, et al. Mechanics of Materials, 2019, 136, 103086. 33 Yang L W, Liu H T, Cheng H F. Composites Part B: Engineering, 2017, 129, 152. 34 Mueller W M, Moosburger-Will J, Sause M G R, et al. Journal of the European Ceramic Society, 2013, 33(2), 441. 35 Mueller W M, Moosburger-Will J, Sause M G R, et al. Journal of the European Ceramic Society, 2015, 35(11), 2981. 36 Gavalda-Diaz O, Manno R, Melro A, et al. Acta Materialia, 2021, 215, 1359. 37 Sørensen B F. Mechanics of Materials, 2017, 104, 38. 38 Xiang W, Li X, Ni H, et al. Composite Structures, 2022, 300, 116143. 39 Boakye E E, Key T S, Parthasarathy T A, et al. Journal of the American Ceramic Society, 2018, 101(1), 91. 40 De M, Robin M G, Gale L, et al. Journal of the American Ceramic Society, 2021, 104(6), 2741. 41 Callaway E B, Christodoulou P G, Zok F W. Journal of the Mechanics and Physics of Solids, 2019, 132, 103673. 42 Jiang R. Preparation and performance of continuous alumina fiber reinforced alumina matrix composites. Ph. D. Thesis, National University of Defense Technology, China, 2019 (in Chinese). 姜如. 连续氧化铝纤维增强氧化铝基复合材料的制备与性能研究. 博士学位论文, 国防科技大学, 2019. 43 Wang Y. Preparation and performance of aluminosilicate fiber-reinforced oxide ceramic matrix composites. Ph. D. Thesis, National University of Defense Technology, China, 2015(in Chinese). 王义. 铝硅酸盐纤维增强氧化物陶瓷基复合材料的制备与性能. 博士学位论文, 国防科学技术大学, 2015. 44 Lamon J, Rebillat F, Evans A G. Journal of the American Ceramic Society, 1995, 78(2), 401. 45 Ma X K, Yin X W, Cao X Y, et al. Ceramics International, 2016, 42(2), 3652. 46 Jelitto H, Felten F, Swain M V, et al. Journal of Applied Mechanics, 2007, 74(6), 1197. 47 Echeberria J, Tarazona J, He J Y, et al. Journal of the European Ceramic Society, 2002, 22(11), 1801. 48 Liu H T, Yang L W, Han S, et al. Journal of the European Ceramic Society, 2017, 37(3), 883. 49 Blaese D, Garcia D E, Guglielmi P, et al. Journal of the European Ceramic Society, 2015, 35(5), 1593. 50 Kerans R J, Parthasarathy T A. Composites Part A Applied Science and Manufacturing, 1999, 30A (4), 521. 51 Kerans R J, Hay R S, Parthasarathy T A, et al. Journal of the American Ceramic Society, 2002, 85(11), 2599. 52 Huang Y F. Boundary element analysis of dynamic fracture in inclusion composites. Master's Thesis, Beijing University of Technology, China, 2011(in Chinese). 黄祎丰. 夹杂复合材料中动态断裂的边界元分析. 硕士学位论文, 北京工业大学, 2011. 53 Lei J. Transient boundary element numerical simulation of rapid crack propagation in composite materials. Ph. D. Thesis, Beijing Jiaotong University, China, 2005 (in Chinese). 雷钧. 复合材料中裂纹快速扩展的瞬态边界元数值模拟. 博士学位论文, 北京交通大学, 2005. 54 Leguillon D, Lacroix C, Martin É. Journal of the Mechanics and Physics of Solids, 2000, 48(10), 2137. 55 Lacroix C, Leguillon D, Martin E. Composites Science and Technology, 2002, 62(4), 519. 56 Martin E, Leguillon D, Lacroix C. Composite Interfaces, 2002, 9(2), 143. 57 Carrère N, Martin E, Lamon J. Composites Part A Applied Science and Manufacturing, 2000, 31A (11), 1179. 58 Dai J, He L, Mu R, et al. Journal of Composite Materials, 2022, 56(9), 1379. 59 Yang J, Chen J, Ye F, et al. Ceramics International, 2022, 48(22), 32628. |
|
|
|